Logitech G502 Proteus Spectrum Setup Guide
- June 8, 2024
- Logitech
Table of Contents
Logitech® G502 Proteus Spectrum
Setup Guide
Guide d’installation
Your G502 is ready to play games.
If you would like to customize your G502, refer to the next section.
You can customize the three onboard profiles of the G502—surface tuning, button programming, lighting color, lighting effects, and tracking behavior—using the Logitech Gaming Software. Download this free software and learn how to customize the G502 at www.logitech.com/support/g502-spectrum
To adjust the weight and balance of your G502, first open the weight door by grasping the mouse firmly in your right hand and pulling the tab down with your left thumb.
You can place up to five 3.6 gram weights in a number of different orientations. Experiment with different positions for the weights to find an overall weight and balance that feels right for you.
After inserting the weights, close the weight door by inserting the tabs on the weight door into the slots on the left side of the mouse and rotating the door down until the magnet holds the weight door firmly closed.
7
Out of the box, the sensor for the G502 is configured to deliver amazing
tracking across a wide range of surfaces. For an extra edge, it can also be
further tuned for optimal performance with the specific surface that you use
for gaming. To tune the sensor, use the Logitech Gaming Software.
11 fully programmable buttons
1. Left (Button 1)
2. Right (Button 2)
3. Wheel click (Button 3)
4. Back (Button 4)
5. Forward (Button 5)
6. DPI Shift (Button G6)
7. DPI Down (Button G7)
8. DPI Up (Button G8)
9. Scroll left (wheel tilt left)
10. Scroll right (wheel tilt right)
11. Profile select (Button G9)
12. Wheel mode shift (not programmable)
Onboard profiles
The G502 has three preconfigured profiles, one each for high sensitivity
gaming, low sensitivity gaming, and standard mouse usage. Use Button 9 (see
mouse drawing) to rotate through these default profiles. When you change
profiles, the DPI indicator lights will change color to blue for three seconds
and will indicate the new mode as shown here:
DPI indicators
DPI values are shown using the three LEDs indicated in the mouse drawing. The
image below shows which DPI value is being indicated by the LED panel.
Hyperfast Scroll Wheel
The G502 features Logitech’s exclusive dual-mode hyperfast scroll wheel. Click
the button right below the wheel (Button G12) to switch between the two modes.
Tips
Weight and balance tuning is very much an exercise in personal preference.
Generally speaking, more weight makes it easier to control high DPI settings,
while less weight makes low-DPI gaming less fatiguing.
Centering weights along an imaginary line between your thumb and right-side
grip finger(s) will help maintain optimal front-to-back balance.
The effects of changing weights may not be immediately apparent. After
changing the position or number of weights, give yourself some time to
experience the difference before changing them again.
Try the default profile settings in practice games before changing these
settings.
Advanced gamers can customize each game according to their specific button
configuration and sensitivity switching needs. The Logitech Gaming Software
stores this information and applies it automatically when the game is
detected.
If the mouse doesn’t work
- Unplug and re-plug the USB cable to ensure a good connection.
- Try the mouse USB cable in another USB port on the computer.
- Use only a powered USB port.
- Try rebooting the computer.
- If possible, test the mouse on another computer.
- Visit www.logitech.com/support/g502-spectrum for more suggestions and assistance.
Logitech G502 Proteus Spectrum Setup Guide – Download
[optimized]
Logitech G502 Proteus Spectrum Setup Guide – Download
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>