FIMI X8 SE 4K Camera Drone User Manual
- June 8, 2024
- FIMI
Table of Contents
- Contents
- Services & Support
- Product Instruction
- Package List
- Drone
- Gimbal and Camera
- APP
- Maintenance and Calibration
FIMI X8 SE User Manual
FIMI X8 SE 4K Camera Drone User Manual – Download
Please read the user manual carefully before using and keep the manual for future reference.
Contents
Services & Support
FIMI provides X8 SE users with tutorial videos and the following
information:
-
FIMI X8 SE User Manual
-
FIMI X8 SE Quick Start Manual
-
FIMI X8 SE Disclaimer and Safety Operation Instructions Users are advised to watch tutorial videos before using the product and read FIMI X8 SE Disclaimer and Safety Operation Instructions carefully and get to know the process of using by going through FIMI X8 SE Quick Start Manual. For more detailed product information, please refer to FIMI X8 SE User Manual. Please download the firmware and watch the tutorial videos on the link https://[www.fimi.com/fimi-x8-se.html](https://www.google.com/url?q=http://www.fimi.com/fimi-x8-se.html&sa=D&source=editors&ust=1617768606119000&usg=AOvVaw1UYaPmzh3jWiXkLF1JXqNM)
-
Please scan the the following QR-code to download Fimi Navi app
Product Instruction
The FIMI X8 SE is an aerodynamic foldable drone equipped with intelligent control, wireless communication and other advanced technology which are necessary to realize functions like long-distance remote control, intelligent flight, precise landing, etc. The built-in 3-axis gimbal stabilizes the camera which is able to shoot 4K video at 30 fps and which performs HD real-time image transmission. The APP enriches the remote controller with more features and fast connection. The remote controller fits iPad Mini at the maximum range. The sticks are detachable.
Package List
Drone x 1
Battery x 1 , Remote controller x 1
Positive propeller x 3 Reverse propellerx 3
Charger x 1 AC cable x 1
Instruction x 2
Product Introduction
-
Drone
Positive propeller
Power button
Battery level lights
Landing gear Optical flow camera
aaaaaaaa
Integrated gimbal camera
Flight status lights
Motor
Drone tail lights
Battery buckle
-
Remote controller
Flight mode/auto return
Left stick
Stick storage slot
Mobile device holder
Right stick
Left dial Record button Shoot button
Power button
USB port
Cable slot
Five-directional button
Battery level lights
Charging port
Auto take-off/land button
Drone
Flight Mode
GPS Mode
To achieve precise hovering, the drone is equipped with a GPS module. The intelligent flight function works in GPS mode. Users can enable Sport Mode or Beginner Mode in the flight settings. When the Beginner Mode is on, the flight speed, flight distance, flight altitude and RTH altitude will be limited. In sport mode, the maximum flight speed is 18m/s(65 km/h), the maximum ascending speed is 5m/s(18 km/h), and the maximum descending speed is 4m/s(14 km/h).
VPU Mode
An Optical Flow module is also built into the drone for precise hovering and landing at the home point. In VPU mode, the Intelligent flight function is not supported. The maximum flight speed is 10m/s(36 km/h), the maximum ascend speed is 3m/s(11 km/h), and the maximum descending speed is 2m/s (7 km/h). When the drone is flying above a well-lit ground with a clear texture and the GPS signal is poor, it will switch automatically to VPU mode.
ATTI Mode
When the GPS signal is poor or the compass has interference, the drone enters in ATTI mode. In this mode, the drone can start drifting horizontally and intelligent flight mode is not supported. Therefore, in case of any accidents, we recommend flying in an open area with good GPS signal reception. Once the drone enters in ATTI mode, please land in a safe place as soon as possible.
Drone Lights
|
Drone lights
|
Drone status
---|---|---
1
|
All lights are fading in and out
|
Self-checking
2
|
All lights are on
|
Drone on the ground: self-check fails
Drone is flying: internal error
3
|
The red and green lights are on and the yellow light is flashing at regular intervals
|
Ready to fly / in flight
4
|
All lights flashing twice
|
Low battery alerts
5
|
All lights are flashing quickly
|
Very low battery alert: land as soon as possible
6
|
The yellow light is flashing
|
The firmware of the drone is updating
red green
Note: Sport Mode will not be available when the drone is over 2400 meters above sea level.
Safety Protection
Failsafe Return
Failsafe return is only supported in GPS mode. When the GPS signal is interrupted for more than 2 seconds, the flight control system built into the drone will take over the control of your drone, plan the return path according to the original flight path, then the drone will fly back and land at the home point. This function works precisely if there are enough GPS satellites are locked, the compass has no interference and the home point has been recorded correctly. If the wireless signal reconnects during the failsafe return, the pilot can turn off App return hint or toggle Auto Return switch to the left again to cancel, and the drone will hover at the current position.
Low-power Protection
In flight, when the battery level is only enough for RTH, App advises users to return, and the drone will return automatically after 10 seconds countdown. When the battery level is only enough for landing, App advises users to land as soon as possible, and the drone will land automatically after 10 seconds countdown. When the battery level is at 10% usage left, the drone will be forced to land.
100%
landing battery level
RTH battery level
current battery level
home point
home point
Hovering on the Edge of No-fly-zone
The drone will automatically hover in the restricted flight area designated by the state, such as the edge of airports, and the App will appear corresponding hints. The user can use sticks to fly the drone from the edge of the no-fly- zone, but the drone will not enter the no-fly-zone.
Intelligent Flight
Auto Take-off
When the conditions are right, press Auto Take-off/Landing button for 2 seconds to take off. In GPS mode, the drone will take off to an altitude of 4 meters and hover for sticks control. In VPU mode, the drone will take off to an altitude of 1.2 meters and hover for sticks control.
4m
Auto Return
When the drone is in flight, the user can toggle the auto return switch to the right to return the drone. When the return distance is less than 10 meters and flight altitude is less than 3 meters, the drone will ascend to 3 meters first and return to the home point; if the flight altitude is greater than or equal to 3 meters, the drone will directly return to the home point.
When the return distance of the drone is greater than or equal to 10 meters and the flight altitude is less than 30 meters, the drone will ascend to 30 meters and return to the home point; if the flight altitude is 30 meters or more, the drone will directly return to the home point . The user can toggle the Auto Return Switch to the left to exit.
Altitude
Auto Landing
When the conditions are right, press Auto Take-off/Landing button for 2 seconds to land vertically.
30m
3m
altitude ≥3m distance<10m
altitude ≥30m distance≥10m
Note: Users can short press the auto take-off/land button to exit intelligent flight.
home point
altitude <3m distance<10m
10m
altitude ≤30m distance≥10m
Distance
Smart Track
Smart Track is supported only in GPS mode. The user can choose Trace, Profile, or Lock in the App menu. The drone will trace the subject chosen at the App interface at a distance.
In Trace mode, the heading will always lock at the target and trace it from the back at a distance.
In Lock mode, the drone will hover at a place if flight speed is 0, following the target 360°. The user can also adjust flight speed, and the drone will fly around the target at a certain distance.
flight speed =0m/s
camera tracking 360°
heading moving direction
In Profile mode, the heading will always lock at the target and trace it from the side at a distance.
flight speed = 0m/s
drone moving direction
heading
Note: In Smart Trace, users should always make sure to avoid people, animals and obstacles in the tracking path to ensure the flight safety. Users should comply with local laws and regulations when using the function.
Orbit
The user can select Orbit mode in the App. when a central point and a radius are set, the drone will fly around the central point at a default speed. If a point of interest is set, the camera will be locked at the POI.
Fly to a central point to set the central point Fly away from the central point to set radius
Set flight speed, move direction and heading. If the heading is free,the user can drag a rectangle around a POI
Tap-fly
The user can select Tap-fly in the App. Tap map to choose a destination and set flight speed, the drone will fly over there at a default speed in a straight line. If a point of interest is set, the camera will be locked at the POI
Tap map to choose a destination
Switch to image interface to drag a rectangle around the POI Set flight altitude and speed
POI
drone destination
Central point
If sticks are moved in flight, the flight altitude or radius will be changed. Taking Mode 2 as example:
Dronie
The user can select Dronie,including Rocket and Invert,in the App. In Rocket mode, the drone flies upward with the camera pointing downward at the subject to shoot a video. In Invert mode, the drone flies backward and upward
Counter- clockwise
Ascend
Descend
Radius zoom out
Clockwise Direction&Speed Direction&Speed
Radius zoom in
with the camera locking at the subject to shoot a video.
Drag a rectangle around a POI
Set flight speed and altitude, the flight control center will estimate flight time automatically
The drone automatically adjusts its place
Left stick Right stick
- seconds count down to fly away to shoot a video once the drone completes adjustment
Rocket Invert
fly vertically upward
pitch: -90°
target
fly backwards and upwards
0°< pitch<90°
target
Spiral Mode
The user can select Spiral Mode in the App. Set the central point and radius, the drone will spirally fly upward and shoot a video simultaneously, showing a sense of space.
Fly to a point to set as the central point Fly away the central point to set radius
Set spiral direction and flight distance to start and shoot a video at the same time The mission interrupted if the user moves sticks
Course Lock
The user can select Course Lock mode in the App. The drone saves current fly direction as heading. The user can control sticks to adjust direction of head and gimbal, but the forward direction remains unchanged.
Tripod Mode
The max speed of the drone is 1m/s, and the max rotation speed is 60°/s. In Tripod Mode, operation sensitivity is lowered simultaneously to shoot more stable and smooth video.
Aerial Mode
The brake distance is lengthened and the angular speed of rotation is limited to make sure the shooting videos are more stable and smooth
Note: Course Lock is enabled in Aerial Mode, Users can turn it on in the APP
SAR Mode
The user can select SAR Mode in the APP. With real-time GPS coordinates, the drone could help user to search and rescue.
Image interface: show real-time coordinate and time of the drone, support digital zoom, screen shots to share online
Map interface: show real-time coordinate and time of the drone in ordinary map and satellite map, screen shots to share online
Waypoint
Choosing waypoint and drawing route both are available at map. The drone flies along waypoint route at a default speed. If a point of interest is set, the camera will be locked at the POI. The user can select a way to set waypoints, including choosing points in flight or on the map, historial routes.
Choosing points in flight:
- control the drone to a point to set as a waypoint
- using sticks to set flight altitude and heading direction, dials to set gimbal angle, and actions when reaching the waypoint
- when all waypoints ready, please set waypoints routes attribute, incuding flight speed, heading direction, action at the destination
- POI is enabled when executing waypoints
Choosing points on the map
- tap map to add waypoint
- set waypoint attribute, including flight altitude, action at the destination, rotate direction
- drag the POI icon to the map, and set its a;titude and relate waypoints
- when all waypoints ready, please set flight speed, failsafe action, and action at the destination
- POI is enabled when executing waypoints
Historical routes
- preview the waypoints and its attribute by entering Favorite list
- tap to start and show the real-time waypoints trace Waypoint
POI
Precise Landing
In the process of Return to Home, the optical flow sensor will match landing pad features above the home point. Once matched successfully, the drone will land on the landing pad precisely.
Note: Please enable precise landing in the app before use it.
Fix-wing Mode
In Fix-wing Mode, the drone can only fly forward, not backward. The user can use sticks to control flight speed and course as showed below (America Mode).
Left stick
|
push upward
|
up
---|---|---
push downward
|
down
toggle left
|
turn left
toggle right
|
turn right
Right stick
|
push upward
|
accelerate
push downward
|
decelerate
toggle left
|
turn left
toggle right
|
turn right
Assembly and Disassembly
1 Propellers
Unfold the front and rear arms of the drone.
Attach the gray marked propellers to the motor mounting base with gray marks on the arms.
Ensure the propeller is pressed to the bottom of the mounting base.
Rotate the propeller to the end of the lock direction until the propeller gets bounced and locked.
Press the propeller forcefully and rotate the propeller along the unlock direction to remove the propeller.
Safety tips:
If the propeller is damaged, please replace them to ensure flight safety and efficiency.Check if the propeller is properly installed and fastened before each flight.Stay away from the rotating propeller to avoid cutting.
Note: Take the installation of reverse propeller as an example.
Battery
The intelligent battery of FIMI X8 SE has a capacity of 4500mAh, a voltage of 13.05V. This type of battery employs high energy cell, advanced battery management system, and charge and discharge functionality.
Assemble and disassemble
Push hard the battery, after the battery installed in place, there will be a “click” sound.
To remove the battery, you need to press the battery buckle on both sides of the battery to pull out the battery.
Charging Turning on and off
Connect the battery,charger and AC cable as shown below, and plug the charger into a power outlet
When the battery is in charge, the battery level lights are flashing When the battery is fully charged, the battery level lights go out It takes about 2 hours to fully charge the battery
Short press+long press power button 2 seconds to power on/off Short press to check battery level
Gimbal and Camera
Camera
The camera, equipped with 1/2.3 inch CMOS and wide-angle lens with 26mm equivalent focal distance, supports 4K 30FPS HD videos and 12megapixel photos to shoot a blockbuster easier. It also owns various shooting modes, inculding single, burst, time lapse, panorama shot and slow motion, for different scenario.
Drone TF card
When installing TF card to the drone,please unfold the arms of the drone first and open the interface protection cover
Insert the TF card with the literal upward into the TF card slot When removing TF card, press the TF card to pop out
Note:Support Micro SD ( U3 and above ) 8 ~ 64GB, recommend to use
Sandisk Extreme Pro V30 32G Sandisk Extreme V30 32G Samsung Pro Endurance 32G Lexar Professional 1000X 32G
Sandisk Extreme Pro V30 64G Sandisk Extreme V30 64G Toshiba Exceria Pro 64G
Gimbal
FIMI X8 SE combines a light weight 3-axis mechanical gimbal with the
latest professional control algorithms and ±0.004° control accuracy, which provides a stable shooting platform for camera. The pitch axis, default to tilt from 0°to -90°, can be adjusted by left dial of remote controller or App.
0°
-90°
Operating Mode
Horizon
Parallel
Follow Mode:
The roll axis does not move with the drone and always keep the gimbal horizontally, which suits for shooting stable videos
FPV Mode:
The roll axis rotates with the drone to provide a first person view
Remote controller
With ergonomic design, it is easier and more precise to control. There is no complicated operation to connect App, just plug in and it works. The remote controller fully charged can work about 4.5 hours.
Turning on and off
Charge
. Connect the remote controller to a power adapter as show below
. When the RC is in charge, the battery level lights are flashing
. when the RC is fully charged, the battery level lights go out
. It takes about 4 hours to fully charge the RC in the powered off condition
Short press+long press power button 2 seconds to power on/off Short press to check battery level
5V 2A
Assemble Device Shooting and Recording
Tighten the mobile or pad on mobile device holder by extending the holder to the left.
Open the interface protection cover on the RC bottom. Connect your phone and the RC with a USB cable.
Connect the drone and update firmware according to instructions in Fimi Navi app.
Note: The cable slot is reserved on the right side of the RC.
Press the shoot button to take a photo. A photo is taken when you hear 2 short sounds.
Press the record button to record video. Recording starts when you hear 2 short sounds. Press again to stop recording with 4 short sounds.
During recording, short press the shoot button to capture a photo ( only support 1920×1080 25|30|50|60fps)
The pitch angle of the gimbal can be controlled by toggling the left dial up and down.
The right dial can adjust EV/ISO.
Record button
Shoot button
Shortcut Buttons
Toggle the auto return button to the right when the drone is in flight, the drone will return to the home point.
In the process of auto return, toggle the auto return button to the left, the drone will hover at place and wait for sticks instructions.
Push the five-directional button up default to access map or FPV Push the five-directional button down default to gimbal center or down
Toggle the five-directional button left default to turn on/off battery info interface Toggle the five-directional button right default to turn on/off self-check interface Press the five-directional button center default to turn on/off media
Right dial to adjust EV/ISO value
Left dial to adjust pitch angle of gimbal
When auto take-off/land button turns white, it can be pressed to take off or land
When the drone meets auto take-off conditions, long press 2 seconds to take off When the drone meets auto land conditions,long press 2 seconds to land When the drone is executing intelligent flight, short press this button to exit
Sticks Control Remote Controller Pairing
Mode 1
Counter- clockwise
Forward
Backward
Up
Clockwise Left Right
Down
When a new remote controller or drone is replaced, please pair the remote
controller and the drone again as shown below:
Turn on the drone
Turn on the RC, long press the power button 15 seconds until hearing constant beep sound,and the power button red light flashes
Short press the code pairing button on the drone , the yellow light on the drone goes out
Mode 2
Left stick Right stick
The code pairing succeeds when the power button on the RC turns white and the yellow light on the drone keeps on
Up Forward
Counter- Clockwise Left Right clockwise
Down Backward
Mode 3
Left stick Right stick
Remote lights
Forward
Left Right
Backward
Up
Counter- Clockwise clockwise
Down
Left stick Right stick
APP
Download and install Fimi Navi app, register a FIMI user account before login, and select FIMI X8 SE to enter device
Image Interface
1 2 3
-
Real-time Flight Parameters
28.8m: vertical flight altitude from the home point 32.8m: horizontal distance from the home point
VS1.23m/s: vertical speed HS1.80m/s: horizontal speed
|
Remote Lights
|
Remote status
---|---|---
1
|
Power button’s red light is on
|
Weak signal or not connected to the drone
2
|
Power button’s white light is on
|
Normal signal
3
|
Power button’s red light flashes
|
RC Pairing or upgrading firmware
4
|
Power button’s white light flashes
|
Recording videos
5
|
Auto take-off/landing button’s
red light is on
|
Auto take-off or landing not enabled
6
|
Auto take-off/landing button’s
white light on
|
Ready for auto take-off
: Estimated landing battery
: Estimated RTH battery
-
Drone Status
In flight: current flight status
GPS: current flight mode,including GPS,VPU,ATTI
: drone real-time power
-
Signal Status and General Settings
: show GPS signal status, 0-6 indicates poor with red; 7-12 indicates good with yellow; 13 and above indicate excellent with white. Tap to enter flight control settings
: show image transmission signal strength
: show the RC signal strength, tap to enter RC setting
: show real-time battery level, tap to enter battery settings
: tap to enter settings
4 5 6
: Real-time estimated flight time
8 7
-
Map Interface
Show the drone real-time location and support 3D zoom. Tap to switch with image interface.
-
Metering Mode
tap any place in the image interface for metering, when appearing exposure lock button, click to lock the value.
-
Gimbal and Image Parameters
:Show the current gimbal angle :Show the current EV value
:Show the current ISO value
:Show the current Shutter value
:Show current color mode
:Show the capacity of SD card and its residue
:Show video resolution and frame rate in video mode, or image size in photo mode
-
Camera Operation Area
3:26 :Video record length
:Camera parameter settings, tap to set EV,ISO,shutter,video or photo mode, resolution, video size, white balance, etc.
:Tap to switch between photo and video record
:Tap to start/stop shooting photos or record videos
:PIV button, only appear in video mode with 1080P
:Media library, tap to download or preview videos and photos saved in Micro SD card
8 Intelligent Flight
Tap to enter intelligent flight interface
:Auto Take-off
:Auto Landing
:Auto Return
:Waypoints
:Smart Track, including Trace, Profile, Lock
:Orbit
:Tap-fly
:Dronie,including Rocket and Invert
:Spiral Mode
:SAR Mode
:Aerial Mode
:Tripod Mode
:Course Lock
:Fix-wing Mode
Map Interface Prepare to Fly
:Tap to switch between drone position in the screen center or both drone and phone position in the screen center
:Set current drone position as Home point
:Set current phone position as Home point
:Current drone position
:Home point
:Current phone position
Check Before Taking off
Make sure that the battery of the aircraft and remote controller is
sufficient.
Make sure that the propeller is properly installed and free from damage and aging.
Make sure that the camera lens is clean. Make sure that the TF card is
inserted.
Keep antennas crossed as shown in the figure.
Note: To maintain stable signals, always keep antennas’ longitudinal plane to the aircraft.
Confirm the drone heading
Manual take off
The direction of integrated gimbal camera is the drone heading.
Once the drone is turned on, the heading can be told by navigation lights.
The red light and the green light indicate the heading,and the yellow light is the tail.
Left stick Right stick Left stick Right stick
red green
Keep both sticks to the bottom inner still over 3 seconds, the propellers start spinning
Release both sticks once propellers have been spinning, and firmly push the left stick upward to take off the drone
During flight, release both sticks to hover
At any time during controlled flight, release the sticks and the drone will hover automatically
Safety tips: Always keep the tail pointed at the user to avoid direction misjudging.
Manual take landing Flying Condition Requirement
Left stick Right stick
Slowly move the left stick downward to land the drone
Once the drone has landed, push and hold the left stick down over 5 seconds, the motors will stop
- The drone is suitable for people above 18 years who have full civil capacity.
- Make sure to keep some distance from people, animals, trees, vehicles and buildings while using the drone. Please be careful when someone approaches.
- Keep away from airports, railways, highways, high-rise buildings, utility poles and other dangerous environments when operating the drone.
- Keep away from the areas with complex electromagnetic signals such
Safety tips: The drone has no waterproof function. Please be careful of landing environment. Do not land on an inclined plane for safety.
Stop propellers in an emergency
When motors can’t properly turn off, please toggle the left stick to the bottom inner in maximum range, and press Auto take-off/landing button for 5 seconds simultaneously, the motors will stop.
as communication base stations and high-power antennas when operating the drone.
- The flight altitude and distance of the drone corresponding to the take- off point will be limited based on relevant regulations and policies.
- Do not use this product at the place and time prohibited by regulations and policies.
- To protect the legitimate rights and interests of users, please follow the product safety instructions when using.
- Do not operate the drone in bad weather such as strong winds, rain, snow, or fog.
- Please operate the drone in a broad place with a good GPS signal.
- It is suggested that user should make the first flight under the guidance of an experienced pro.
Safety tips: Do not do the above operation during normal flight to avoid motors being stopped in the air.
Maintenance and Calibration
Remote Controller Calibration
Please try to calibrate the remote controller when you detect
inconsistencies between stick control and drone flying.
Select “RC Calibration” in the remote controller menu Tap” Start” to calibrate the center, do not move sticks
Skip to sticks calibration once the center calibration succeed Skip to dial calibration once the sticks calibration succeed
Note: Please turn off the power of the drone before calibrating the remote controller. RC calibration is not available in flight
Compass Calibration
If the magnetic field changes, the compass needs to be recalibrated to
ensure flight safety. If the drone’s compass needs to be calibrated, the App will give corresponding hints and guidance. After entering the flight control menu, please select “compass calibration”, and then calibrate based on prompts on the App.
Note: Please connect the drone before calibration. Compass calibration is not available in flight.
Gimbal Calibration
Click “gimbal calibration” and enter the calibration page in the gimbal settings menu.
After the drone is placed smoothly, click to start calibration. Do not move the drone during the calibration process.
After the calibration is completed, the App interface shows “Calibration succeed”.
If the App interface shows “Calibration failed”, please recalibrate.
Note: Gimbal calibration is not available in flight.
Propellers Maintenance
Propellers are wearing parts. When they’re damaged, replace them in time to ensure flight safety and efficiency.
Battery Maintenance
Do not throw the battery into fire; Do not batter the battery; Lithium battery’s capacity reduces significantly in low temperature conditions. Do not use the battery when it is below 5 degrees. Do not place the battery under the burning sun.
Gimbal Maintenance
The gimbal of X8 SE, integrated with the drone, does not need to disassemble. Please be careful not to scratch the camera when store the drone. Please keep the camera clean for better image quality.
Drone Self-check
The drone enters the self-check when the drone is powered on. If the self- check failed, App will pop up corresponding hints.
Firmware Upgrade
Please check the firmware version regularly, new version will be pushed
by Fimi Navi App to prompt users to update.
Please download new firmware when the App is connected with the drone and remote controller
Basic Specification
Drone
Product model:FMWRJ02A5 Dimensions:204×106×72.6mm Diagonal size:372mm
Take off weight:About 786g Flight time:About 33min* Max ascending speed:5m/s Max descending speed:4m/s Max flight speed:18m/s
Satellite positioning systems:GPS/GLONASS Hover accuracy:
Vertical:±0.1m (Within the ultrasonic detecting range)
±0.5m (when GPS positioning is active) Horizontal: ±1.5m Operating temperature:0°C ~ 40°C
Suitable altitude:≤5000m
Operating frequency:5.725-5.850GHz
Charger
Rated input:100-240V~50/60Hz 1.5A Rated output:13.05V 3A
Rated power:39.15W
Remote controller
Net weight:About 373g Dimensions:203.8×91×46.6mm Operating frequency:5.725-5.850GHz Type:Rechargeable lithium battery Capacity:3900mAh
Nominal voltage:3.7V Input:5 V 2A
Max transmission distance:About 5000m* Operating temperature:0 ~ 40°C
Suitable altitude:≤5000m
Battery
Type:Rechargeable lithium battery pack Weight:About 275g Capacity:4500mAh
Voltage:11.4V
Limit voltage:13.05V Energy:51.3Wh
Charging ambient temperature:0°C ~ 40°C
Gimbal
Controllable rotation range:0°~ -90°(Pitch) Angular vibration range:± 0.004° Lens:FOV 78.8°
Camera aperture:f2.2
Camera focal distance:4.73mm Equivalent focal distance:26mm Sensor:1/2.3″ CMOS
Effective pixels:12M
ISO range:100 – 3200(Video),100 – 1600(Photo) Shutter speed:8 ~ 1/8000s Max video resolution:3840 x 2160 | 30fps | 25fps | 24fps Max birate: 100Mbps
Max photo resolution:4000×3000 File system:FAT32 / exFAT
Image format:JPG,JPG+DNG Video format:MP4
Memory card type:Micro SD ( U3 and above ) 8 ~ 64GB
Note:
The 33 minutes flight time refers to constant speed at 7m/s (no wind) with fully charged and low cyclic battery. Remote control distance reach to 5km (FCC) in open area and no interference . All above testing and data come from FIMI laboratory, errors may occur in actual use for operating and environmental changes.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>