NEXTIVITY CEL-FI Quartra 4000e Fiber Hub User Guide

June 4, 2024
NEXTIVITY

NEXTIVITY-LOGO

NEXTIVITY CEL-FI Quartra 4000e Fiber Hub

The Cel-Fi QUATRA 4000e Fiber Hub (fHub) expands the Network Unit capacity in QUATRA 4000e deployments from six to up to 12 Coverage Units. The fHub can be installed 2 km (1.2 miles) away from the NU to cover large spaces while maintaining the same signal quality throughout the system.

Industry-Leading Performance for Tall Structures, Campuses, and Multi-

Building Installations

NEXTIVITY-CEL-FI-Quartra-4000e-Fiber-Hub-User-Guide-
FIG-1

  • Multi-carrier Active DAS Hybrid
  • Donor Source Over Fiber
  • Ofcom and ComReg Approved
  • SFP+ Module (not included)

A Fiber Expansion Unit for Cel-Fi QUATRA 4000e

The fHub supports up to six Cel-Fi QUATRA 4000e Coverage Units (CUs). The Cel- Fi QUATRA 4000e Network Unit (NU) passes through the donor signal to the fHub via single or multi-mode fiber connection, supporting one NU to one fHub. The Cel-Fi QUATRA 4000e NU must be activated for Fiber via software. The SFP+ port on the NU connects to an aftermarket hot-pluggable SFP+ transceiver. The NU supports up to six CUs. Connected to the fHub, the NU can support an additional six CUs.

Cel-Fi QUATRA 4000e Network Unit

  • (Q44-E999CNU)

Cel-Fi QUATRA 4000e Coverage Unit

  • (Q41-EECU)

Cel-Fi QUATRA 4000 Range Extender

  • (Q40-OE)

Hardware

  PRODUCT BANDS
INTEGRATION MODELS Cel-Fi QUATRA 4000e 1/3/7/8/20/40

SPECIFICATIONS


HUB SUPPORT (OPTICAL)| SFP+| Duplex LC Connector
1310 nm
NU FIBER INTERFACE| Optical| 8.5%| 16-QAM with full RB allocation
8.5%| E-TM3.1
__

POWER

| __

Hub Internal Supply

| Voltage (VAC)| 100–240
Power – Typical (W)| 200
Power – Max (W)| 321.3
__

SUPPORTED CUS

| __

Coverage Units

| Number Supported (Max)| 6
Category Cables per CU| 2
Interface Type| RJ45
__

USER INTERFACE

| Power / Status| LED| RED / GREEN
CU Link (1-6)| LED| GREEN
Cellular Modem| LED| OFF (See NU for Status)
Ethernet| LED| OFF (See NU for Status)
__

__

__

MECHANICAL

| Dimensions| L × W × H (mm)| 330 × 272 × 85
Weight (kg)| 6.5
Mounting| Wall or Rack| Yes
Cooling| Convection| Yes
Power Supply| Internal with C13 Cord| Yes
Power Switch| On/Off Switch (Housing Mount)| Yes
ENVIRONMENTAL| Maximum Surface Temperature| Measured at 30°C Ambient| 44°C

Antennas

Cel-Fi Blade Antenna

  • Included with Cel-Fi QUATRA 4000e CU
  • (A62-V44-200)

Cel-Fi LPDA-R High-Gain Directional AntennaNEXTIVITY-CEL-FI-Quartra-
4000e-Fiber-Hub-User-Guide-FIG-7

  • (A62-V44-200)

Cel-Fi Low-Profile Antenna

  • (A11-H43-201)

Copyright © 2022 by Nextivity, Inc, U.S. Patents pending. All rights reserved. The Nextivity and Cel-Fi logos are registered trademarks of Nextivity Inc. All other trademarks or registered trademarks listed belong to their respective owners. Designed by Nextivity Inc in California. brief_q4000e-fiber- hub_22-0915

Nextivity Inc.
16550 West Bernardo Drive, Bldg. 5, Suite 550, San Diego, CA 92127
www.cel-fi.com

cel-fi.com/quatra4000e

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals