KRAMER 602T Two Fiber Detachable Optical DVI Transmitter and Receiver User Manual

KRAMER 602T Two Fiber Detachable Optical DVI Transmitter and Receiver

602T/R Quick Start Guide
This guide helps you install and use your product for the first time. For more detailed information, go to http://bit.ly/k-prod-downloads to download the latest manual or scan the QR code on the left.

Check what’s in the box

• 602T/R Two-Fiber Detachable Optical DVI Transmitter Receiver
• 2 Power supplies (5V DC)
• 1 Quick Start sheet

Save the original box and packaging in case you need to return your 602T/R to the factory for service.

Capture the EDID
Capture the EDID of the display device if the display has a resolution different than 1600×1200.

1. Connect the power to the display.
2. Connect the power to the 602T.
3. Push the EDID button.
4. Connect the 602T directly to the display device (the LED flashes).
5. When the LED is off, disconnect the 602T from the display.

Connect the transmitter/receiver pair

1. Connect the power to the 602R.
2. Connect the LC fiber cables to the 602T and 602R modules.
3. Plug the 602T DVI connector directly to the DVI connector of the PC.
4. Plug the 602R DVI connector directly to the DVI connector of the display.
5. Connect the power to the PC and the display.

Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better!

Our 1,000-plus different models now appear in 14 groups that are clearly defined by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers; GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7: Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9: Room Connectivity; GROUP 10: Accessories and Rack Adapters; GROUP 11: Sierra Video Products; GROUP 12: Digital Signage; GROUP 13: Audio; and GROUP 14: Collaboration.

Congratulations on purchasing your Kramer 602T Two-fiber Detachable Optical DVI Transmitter and 602R Two-fiber Detachable Optical DVI Receiver, which are ideal for the following typical applications:

• Digital flat panel and plasma displays used in medical, commercial and travel applications
• Conference rooms and auditoriums
• Kiosks with digital flat panel displays for presenting information
• LED signboards in streets and stadiums

Getting Started

• Unpack the equipment carefully and save the original box and packaging materials for possible future shipment
• Review the contents of this user manual

Go to http://www.kramerelectronics.com/support/product_downloads.asp to check for up-to-date user manuals, and application programs, and to check if firmware upgrades are available (where appropriate).

Achieving the Best Performance

• Use only good quality connection cables (we recommend Kramer high-performance, high-resolution cables) to avoid interference, deterioration in signal quality due to poor matching, and elevated noise levels (often associated with low quality cables)
• Do not secure the cables in tight bundles or roll the slack into tight coils
• Avoid interference from neighboring electrical appliances that may adversely influence signal quality
• Position your Kramer 602T, 602R away from moisture, excessive sunlight and dust

This equipment is to be used only inside a building. It may only be connected to other equipment that is installed inside a building.

Safety Instructions

• Caution: There are no operator serviceable parts inside the unit
• Warning: Use only the Kramer Electronics input power wall adapter that is provided with the unit
• Warning: Disconnect the power and unplug the unit from the wall before installing
• Warning: Class 1 Laser Product
  • Invisible laser radiation present
  • Avoid long-term viewing of laser
  • Avoid the use of magnifying viewing aids or instruments (such as binoculars, telescopes, microscopes and magnifying lenses, but not spectacles or contact lenses)
  • Avoid placing optical devices in the emitted beam that could cause the concentration of the laser radiation to be increased

Recycling Kramer Products
The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims to reduce the amount of WEEE sent for disposal to landfill or incineration by requiring it to be collected and recycled. To comply with the WEEE Directive, Kramer Electronics has made arrangements with the European Advanced Recycling Network (EARN) and will cover any costs of treatment, recycling and recovery of waste Kramer Electronics branded equipment on arrival at the EARN facility. For details of Kramer’s recycling arrangements in your particular country go to our recycling pages at http://www.kramerelectronics.com/support/recycling/

Overview

The 602T and 602R are a small and lightweight fiber optic transmitter and receiver pair for DVI signals. The 602T converts electrical signals to optical signals and the 602R decodes the optical signals back to electrical signals.
The 602T and 602R feature:

• Max. Data Rate – 1.65Gbps

• Max. Resolution – Up to WUXGA (1920×1200) @60Hz, 1080p

• Range – Up to 400m (1312ft) (multimode); up to 1500m (5000ft) (single-mode)

• Cable – 2LC single or multi-mode fiber optic cable

• EDID Capture – Copies and stores the EDID from a display device

• Advanced Solution – Small and lightweight, indispensable asset in any digital signage application

• Standards Compliance – Supports DVI1.0 and DDC2B, fully implemented by fiber-optic communication

• Compliance with the limits for a Class A digital device, pursuant to part 15 and 2 of FCC and CE

• Laser standards compliance – IEC 60825-1, FDA 21CFR1040;
  Laser Class 1: Safety of laser products

• Not HDCP Compliant

• No EMI/RFI

• Size – NanoTools

Powering the 602T and the 602R
Your 602T/602R pair comes with two 5V DC power adapters. The 602R must always be powered via the external power adapter. The 602T can take power from the external power adapter or from the 5V pin on the DVI card in the computer. However, when using most laptops or a computer with an express graphic card, an external power adapter is required. The 602T automatically detects if it is being powered via the external power adapter, and if so, the internal power supply cuts off.

Your Two-fiber Detachable Optical DVI Transmitter/Receiver
Figure 1 illustrates the 602T and 602R two-fiber detachable optical DVI extension system:

Using the Two-fiber Detachable Optical DVI System

This section describes how to:

• Capture the EDID of the display device (see Section 4.1)
• Connect the detachable optical DVI transmitter and receiver (see Section 4.2)
• Avoid pitfalls when using the 602T and 602R (see Section 4.3)

Capturing the EDID
The 602T and 602R are connected via two channels that transmit R, G, B and clock signals. The EDID of the display device is captured onto the transmitter for the computer to read.
The factory default EDID is set to UXGA (1600×1200) at 60Hz vertical refresh rate. If your display has this resolution, you do not need to capture the EDID.

You can capture the EDID of the display device on the 602T so that when the computer connects to the 602T, it reads the virtual EDID information and identify the display device. This procedure is performed only once for the connected display device. After storing the EDID, the system can be connected and disconnected without having to set the EDID again. If you decide to use a different display, then you need to set the EDID again.

To capture the EDID of a display device, do the following:

1. Connect the power to the display.

2. Connect the 5V power adapter to the power socket of the 602T, and connect the adapter to the mains electricity.

3. Push the EDID button (illustrated in Figure 2), using a small screwdriver. The EDID LED flashes twice and turns off.

4. Connect the 602T unit directly to the display device (while it is powered ON).
   The EDID LED flashes several times while reading the EDID. The LED turns OFF after about eight seconds.

5. Disconnect the transmitter from the display.
   The LED lights

6. Disconnect the 602T.
   The EDID information is now stored and the Indication LED is on.

Connecting the Detachable Optical DVI Transmitter/Receiver
To connect the 602T Two-fiber Detachable Optical DVI Transmitter with the 602R Two-fiber Detachable Optical DVI Receiver, as the example in Figure 4 illustrates, do the following:

1. Set the EDID of the display device (see Section 4.1).

2. Connect the 602R to the 5V DC power adapter and connect the adapter to the mains electricity. The blue LED lights.

3. Connect the duplex LC fiber cables to the 602T and 602R modules, one cable at a time, as illustrated in Figure 3.
   Single-mode and multi-mode fiber are applicable up to 500 meters. For distances over 500 meters, use single-mode fibers.

4. Plug the 602T DVI connector directly to the DVI connector of the computer. Do not use any intermediate cable or adapter between them, and connect cables 1 and 2 as indicated in Figure 3

5. Connect the 602R DVI connector directly to the DVI connector of the display device.

6. Turn ON the Power on the computer and then on the display device.

7. If the transmitter does not power up, connect the 5V power adapter to the 602T transmitter, and connect the adapter to the mains electricity.
   You can use the power supplied through a DVI pin from the graphic cards instead of using the power adapter. After completing the installation, if the system does not seem to work properly, reconnect the power adapter while the system is powered.

Avoiding Pitfalls During Operation

• Check that all the AC and DC plugs and jacks used by the external power supplies are firmly connected
• Check that the DVI ports are firmly plugged into the computer and the display device, and be sure that the transmitter and receiver modules are correctly plugged into the computer and display device, respectively
• Check if the computer and display are powered ON and properly booted
• Reset the system by unplugging and then replugging the transmitter DVI port or receiver DVI port and then reboot the system

If the screen is distorted or displays noise:

• Check if the graphics resolution is properly set
• Go to the Display Properties of Windows and check the settings
• Be sure that the resolution is set for WUXGA (1920 x 1200) at 60Hz, or lower
• Reset the system
• Disconnect and reconnect the optical DVI cables

Be sure that at all times the cables are stored and used away from liquid or dirt.

Technical Specifications

Specifications are subject to change without notice at http://www.kramerelectronics.com

LIMITED WARRANTY

The warranty obligations of Kramer Electronics for this product are limited to the terms set forth below:

What is Covered
This limited warranty covers defects in materials and workmanship in this product.

What is Not Covered
This limited warranty does not cover any damage, deterioration or malfunction resulting from any alteration, modification, improper or unreasonable use or maintenance, misuse, abuse, accident, neglect, exposure to excess moisture, fire, improper packing and shipping (such claims must be presented to the carrier), lightning, power surges, or other acts of nature. This limited warranty does not cover any damage, deterioration or malfunction resulting from the installation or removal of this product from any installation, any unauthorized tampering with this product, any repairs attempted by anyone unauthorized by Kramer Electronics to make such repairs, or any other cause which does not relate directly to a defect in materials and/or workmanship of this product.

This limited warranty does not cover cartons, equipment enclosures, cables or accessories used in conjunction with this product. Without limiting any other exclusion herein, Kramer Electronics does not warrant that the product covered hereby, including, without limitation, the technology and/or integrated circuits) included in the product, will not become obsolete or that such items are or will remain compatible with any other product or technology with which the product may be used.

How Long Does this Coverage Last
One year as of this printing; please check our Web site for the most current and accurate warranty information.

Who is Covered
Only the original purchaser of this product is covered under this limited warranty. This limited warranty is not transferable to subsequent purchasers or owners of this product.

What Kramer Electronics will do
Kramer Electronics will, at its sole option, provide one of the following three remedies to whatever extent it shall deem necessary to satisfy a proper claim under this limited warranty:

1. Elect to repair or facilitate the repair of any defective parts within a reasonable period of time, free of any charge for the necessary parts and labor to complete the repair and restore this product to its proper operating condition. Kramer Electronics will also pay the shipping costs necessary to return this product once the repair is complete.
2. Replace this product with a direct replacement or with a similar product deemed by Kramer Electronics to perform substantially the same function as the original product.
3. Issue a refund of the original purchase price less depreciation to be determined based on the age of the product at the time remedy is sought under this limited warranty.

What Kramer Electronics will not do Under This Limited Warranty
If this product is returned to Kramer Electronics or the authorized dealer from which it was purchased or any other party authorized to repair Kramer Electronics products, this product must be insured during shipment, with the insurance and shipping charges prepaid by you. If this product is returned uninsured, you assume all risks of loss or damage during shipment. Kramer Electronics will not be responsible for any costs related to the removal or re-installation of this product from or into any installation. Kramer Electronics will not be responsible for any costs related to any setting up this product, any adjustment of user controls or any programming required for a specific installation of this product.

How to Obtain a Remedy under this Limited Warranty
To obtain a remedy under this limited warranty, you must contact either the authorized Kramer Electronics reseller from whom you purchased this product or the Kramer Electronics office nearest you. For a list of authorized Kramer Electronics resellers and/or Kramer Electronics authorized service providers, please visit our web site at www.kramerelectronics.com or contact the Kramer Electronics office nearest you. In order to pursue any remedy under this limited warranty, you must possess an original, dated receipt as proof of purchase from an authorized Kramer Electronics reseller. If this product is returned under this limited warranty, a return authorization number, obtained from Kramer Electronics, will be required. You may also be directed to an authorized reseller or a person authorized by Kramer Electronics to repair the product.

If it is decided that this product should be returned directly to Kramer Electronics, this product should be properly packed, preferably in the original carton, for shipping. Cartons not bearing a return authorization number will be refused.

Limitation on Liability
THE MAXIMUM LIABILITY OF KRAMER ELECTRONICS UNDER THIS LIMITED WARRANTY SHALL NOT EXCEED THE ACTUAL PURCHASE PRICE PAID FOR THE PRODUCT. TO THE MAXIMUM EXTENT PERMITTED BY LAW, KRAMER ELECTRONICS IS NOT RESPONSIBLE FOR DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION, OR UNDER ANY OTHER LEGAL THEORY. Some countries, districts or states do not allow the exclusion or limitation of relief, special, incidental, consequential or indirect damages, or the limitation of liability to specified amounts, so the above limitations or exclusions may not apply to you.

Exclusive Remedy
TO THE MAXIMUM EXTENT PERMITTED BY LAW, THIS LIMITED WARRANTY AND THE REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED. TO THE MAXIMUM EXTENT PERMITTED BY LAW, KRAMER ELECTRONICS SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IF KRAMER ELECTRONICS CANNOT LAWFULLY DISCLAIM OR EXCLUDE IMPLIED WARRANTIES UNDER APPLICABLE LAW, THEN ALL IMPLIED WARRANTIES COVERING THIS PRODUCT, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY TO THIS PRODUCT AS PROVIDED UNDER APPICABLE LAW. IF ANY PRODUCT TO WHICH THIS LIMITED WARRANTY APPLIES IS A “CONSUMER PRODUCT” UNDER THE MAGNUSON- MOSS WARRANTY ACT (15 U.S.C.A. §2301, ET SEQ.) OR OTHER APPICABLE LAW, THE FOREGOING DISCLAIMER OF IMPLIED WARRANTIES SHALL NOT APPLY TO YOU, AND ALL IMPLIED WARRANTIES ON THIS PRODUCT, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR THE PARTICULAR PURPOSE, SHALL APPLY AS PROVIDED UNDER APPLICABLE LAW.

Other Conditions
This limited warranty gives you specific legal rights, and you may have other rights which vary from country to country or state to state. This limited warranty is void if (i) the label bearing the serial number of this product has been removed or defaced, (ii) the product is not distributed by Kramer Electronics or (ili) this product is not purchased from an authorized Kramer Electronics reseller. If you are unsure whether a reseller is an authorized Kramer Electronics reseller, please visit our Website at www.kramerelectronics.com or contact a Kramer Electronics office from the list at the end of this document. Your rights under this limited warranty are not diminished if you do not complete and return the product registration form or complete and submit the online product registration form. Kramer Electronics thanks you for purchasing a Kramer Electronics product. We hope it will give you years of satisfaction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>