Rowenta IXEO All in One Iron And Steamer User Manual

Rowenta IXEO All-in-One Iron And Steamer

Specifications

• Brand : Rowenta
• Model : IXEO QR14XX
• Product Code : 1820003356
• Water Compatibility: Can use untreated tap water; recommended to mix with distilled water if water is very hard
• Environment : Recyclable materials, dispose at local waste collection point

Product Overview

The Rowenta IXEO QR14XX is a versatile garment steaming system that combines a hanger hook, tilting board with cover, removable & lockable iron rest, steam unit, and more for efficient garment care.

Product Components

1. Hanger hook
2. Tilting board + cover
3. Removable & lockable iron rest
4. Iron
5. Water hose
6. Height lockers
7. Collapsible poles
8. On/Off switch
9. Steam unit
10. Wheels
11. Water tank
12. Iron soleplate
13. Steam trigger
14. Watertank inlet
15. Fabric brush*
16. Clips*

Product Usage Instructions

Incline the Board:
To adjust the board’s position, put your hands on each side of the board, raise it vertically, and tilt it back until you find your desired position.

Adjust Board and Iron Rest Height:
Unlock the height adjusters to raise or lower the board/iron rest. Once adjusted, fully close the height adjusters to lock them in place.

Filling Water Tank:

1. Unplug the appliance.
2. Open the water tank inlet.
3. Fill the tank with water.
4. Close the inlet securely.

Operating the Appliance:

1. Place the iron on the iron rest.
2. Plug in the appliance and switch it on.
3. Wait for the indicator light to stop flashing.
4. Remove the iron from its rest and press the trigger to release steam.

IMPORTANT SAFETY INSTRUCTIONS

When using an appliance, basic precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING

• Only use an appliance for its intended use.
• To avoid the risk of electric shock, do not immerse the appliance in water or other liquids.
• Always turn the appliance OFF before plugging or unplugging the appliance from the electrical outlet. Never pull on the cord to disconnect the appliance from the electrical outlet; instead, grasp the plug and pull on the plug to disconnect the appliance.
• Do not let the cord touch hot surfaces. Let the appliance cool completely before putting the appliance away.
• Always disconnect the appliance from the electrical outlet before filling the appliance with water, emptying the water from the appliance, and when the appliance is not in use.
• Do not operate the appliance with a damaged cord or in the event the appliance has been dropped or damaged. To avoid the risk of electric shock, do not disassemble the appliance. Take it to a qualified serviceman for examination and repair. Incorrect assembly might result in a risk of electric shock when the appliance is used after reassembly.
• Close supervision is required for any appliance used by or near children. Do not leave the appliance unattended while the appliance is connected.
• Burns can occur from touching hot metal parts, hot water, or steam. Use caution when you turn an appliance upside down – there might be hot water in the reservoir.
• To avoid a circuit overload, do not operate an appliance on the same circuit with another high wattage appliance.
• If an extension cord is absolutely necessary, a cord with an ampere rating equal to or greater than the maximum rating of the appliance shall be used. A cord rated for less amperage can result in a risk of fire or electric shock due to overheating. Care shall be taken to arrange the cord so that it cannot be pulled or be tripped over.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• The appliance must be used and rested on a stable surface;
• When placing the appliance on its stand, ensure that the surface on which the stand is placed is stable;
• The appliance must not be left unattended while it is connected to the supply mains.
• Cleaning and user maintenance shall not be made by children without supervision.
• The appliance is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking.
• Always disconect the appliance from the electrical outlet, before you leave the room.
• To reduce the risk of contact with hot water emitting from steam vents, check appliance before each use by holding it away from body and operating steam button.

SAVE THESE INSTRUCTIONS

WHAT WATER MAY BE USED?
Your appliance has been designed to operate using untreated tap water. If in doubt, check with your local water authority. However, if your water is very hard, you can mix 50% untreated tap water with 50% distilled or demineralised water.

IMPORTANT Heat concentrates the elements contained in water during evaporation.The types of water listed below contain organic waste or mineral elements that can cause spitting, brown staining or premature wear of the appliance: water from tumble dryers, scented or softened water, water from refrigerators, batteries or air conditioners, pure distilled or demineralised water or rain water should not be used in your appliance. Also do not use boiling, or bottled mineral water, or any other additived water.

ENVIRONMENT
Environment protection first!

• Your appliance contains valuable materials that can be recovered or recycled.
• Leave it at a local civic waste collection point.

Before first use

On first use, fumes and odour may come from the appliance. They do not affect the use of the appliance and disappear quickly. Small particles may also come from the iron. These are part of the production process and do not affect yourself or your garments. They disappear quickly. The appliance must be used and placed on a flat, stable, heat-resistant surface. When you place the appliance on its stand, ensure that the surface on which the stand is placed is stable. Never use the appliance if it is fallen down.

First use

Incline the board
Put the hands on each side of the board, raise it vertically, and tilt it EN back until you find your desired position.

Adjust the board and the iron rest height

When the height of the board or of the iron rest needs to be adjusted, unlock the height adjusters. Raise or lower the board/iron rest until the desired position. Fully close the height adjusters to lock in place.

When unlocking the poles, the board may go down. Hold it during manipulations.

Product use

Unplug the appliance. Open the watertank inlet. Fill it, and close the inlet.

Put the iron on the iron rest. Plug the appliance and switch it on. Wait until the light stops flashing.

Remove the iron from its rest, and press the trigger until steam comes out. At first use, it might take more time than usual.

Never iron or steam directly on a garment being worn by someone

Steam boost
Press the steam trigger two times in a second to activate the steam boost

Auto-off
After 8 minutes of inactivity, the steam unit will change to stand-by mode. Light will be flashing. To wake up the appliance, press on the on/off switch and wait until light is on.

After 38 minutes of inactivity, the steam unit will switch off automatically and the light will turn off.

Accessories

Use the hanger hook to iron a garment placed on a hanger.

Fabric brush
Before you remove or attach the brush, switch off the appliance and allow it to cool down for 1 hour. Put the steam brush on the iron soleplate. This accessory helps to open the garment fibres for better steam penetration.

Removable steam unit

Remove the steam unit off its base. Unlock this iron rest by pushing on the inside plastic strip. Remove the iron rest with the iron.

Position the iron and its iron rest on the steam unit.

BONUS
You can also tie your iron & iron rest to the board when you return to the horizontal board orientation. To unlock, press the tab in the hanger hook.

Move around with your appliance. Plug in, switch it on, and wait until it heats up. Only use when the base is on stable ground.

Always reposition the iron in its iron rest when not in use, never put the hot soleplate directly on the steam unit

Product cleaning

Switch off & unplug the appliance. Wait 1 hour to allow it to cool down completely.

Clean the soleplate with a damp soft cloth or sponge.

Never use abrasive products or surfaces to clean the soleplate

Product storage

Switch off & unplug the appliance. Wait 1 hour to allow it to cool down completely.

Empty the water tank.

Tip-up the board to the vertical position. Lean the all appliance backwards in order to move & store it away.

Problems with your appliance

FAQ

Q: Can I use untreated tap water in the appliance?
A: Yes, the appliance is designed to operate using untreated tap water. However, if your water is very hard, it is recommended to mix 50% untreated tap water with 50% distilled or demineralized water.

Q: How do I adjust the height of the board and iron rest?
A: To adjust the height, unlock the height adjusters, raise or lower the board/iron rest to the desired position, and then lock the adjusters in place securely.

Q: What should I do if fumes or odors come from the appliance during initial use?
A: Fumes and odors during initial use are normal and will dissipate quickly. They do not affect the appliance’s performance or safety.

References

• Rowenta USA | Garment Steamers, Steam Irons & Humidifiers

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>