NameLessRC Nano400 VTX User Manual

June 8, 2024
NameLessRC

NameLessRC Nano400 VTX User Manual

Nano400

Specification and Purameters:

  • Brand Name:NameLessRC
  • Item Name: Nano400 VTX
  • Output Power: PIT/25mW/100mW/200mW/400mW Switchable
  • Control Mode: BFOSD Control(RX)
  • Input Power: 5V
  • Video System: NTSC/PAL
  • Antenna: IPEX
  • Size: 12.4MM12.4MM3.5MM
  • Weight: 0.7g
  • Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362-5945 MHZ

Attention:

Nano400’s factory set up is on lock mode(5733-5866MHZ unlock). Please follow your local laws and regulations if you need to unlock the frequency.

Pins Assignment:

Pins Assignment

Precautions for use:

  • Make sure output terminal is installed antenna before it is powered.
  • Please maintain a good cooling environment for better performance.
  • Input voltage must be within the specified range 5V.
  • Please choose antenna with good VSWR and DB if you replace, to get far transmission distance.
  • Pay attention to static electricity protection during transportation and installation.

Frequency and power control methods:

  • The NLRC Nano400 VTX is set up via BFOSD Control (IRC Tramp)
  • The NLRC Nano400 VTX’s default set up is lock on 25mw.
  • To lock/unlock the VTX channels, please enter the PIT mode for three times within 30secs after powering up the VTX (PIT mode switch is set in BF mode page). The 3 LEDs will flash one by one if the VTX is successful to lock/unlock. Please re-power the VTX after this step.

LED functions:

  • Orange LED shows channels status. Green for bands and Blue for power.
  • The Green LED flash after Orange and blue LED flash at the same time means the VTX enter PIT mode successfully.
  • The three LEDs will flash one by one after the VTX is powered. After that, each LED will flash to show the channel, band & power’s status. Orange LED flash 1 time for Channel 1, 2 times for Channel 2. Green LED flash 1 time for Band 1, 2 times for Band 2 and so on. The three LEDs will flash one by one again after finish showing the status.

Frequency Table(Mhz):

Red area on frequency table is locked area! Please follow your local laws and regulations.

Frequency Table

NameLessRC Nano400 VTX User Manual – Download [optimized]
NameLessRC Nano400 VTX User Manual – Download

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals