eklectik TT110 3 Speed Turntable Record Player Guitar Turntable User Manual

eklectik TT110 3 Speed Turntable Record Player Guitar Turntable

Product Information

Product Name: TT110 3-Speed Turntable Record Player

Product Description: The TT110 is a 3-speed turntable record player that allows you to enjoy your vinyl records with ease. It features a built-in speaker, stylus, tonearm, and various control knobs for adjusting the speed and volume. The record player also comes with a guitar handle for easy carrying and a wall mounting option for space-saving convenience.

Product Components

• Record Player Guitar Handle
• Speaker
• Stylus
• Stylus handle
• Tonearm
• Tonearm Lock
• Tonearm Lift Lever
• DC 12V Power Input Jack
• RCA Audio Out Ports
• AUX In port
• Mode Knob
• Speed Knob
• Power/Volume Knob
• Status LED indicator
• Platter
• Magnetic Record holder

Preparation for Use

Caution: When unpacking and moving, please carefully and gently take the record player out and place it in a safe and horizontal location to avoid any damage to the stylus.

1. Install the guitar handle:
2. Align the notch of the guitar handle with the opening of the record player’s main body, then connect the guitar handle to the main body.
3. Use a screwdriver to tighten the included two black screws (PWA4 / 1.57 inches sized) to fix the guitar handle on the main body of the record player.
4. Wall mounting:
5. Set the mounting holes on the wall. The length of the wall needs to be more than 41.3 inches (1050 mm), and the width needs to be more than 15.7 inches (400 mm).
6. Hold the back of the record player against the wall and choose the position where you want to place it. Mark the top of the mounting bracket of the record player, then draw a horizontal line across it; and draw a vertical center line of the record player.
7. Place and align the top of the included wall bracket with the marked horizontal line, and align the center line of the wall bracket with the marked vertical center line.
8. Mark the positions of the mounting holes on the wall bracket, then drill the four mounting holes on the wall.
9. Insert the included four plastic dowels into the mounting holes. The opening end of the plastic dowels must be level with the wall surface.
10. Use a screwdriver to tighten the included four mounting screws (KA4 / 1.18 inches sized) to fix the wall bracket onto the wall.
11. Hang the record player onto the wall through the mounting bracket.

Powering On/Off

Connecting to the DC power supply: Connect the included Power Adapter to an AC power source and the DC 12V/1A Power Input Jack of the record player.

Turning the turntable player on: After connecting to the power supply, turn the Power/Volume Knob clockwise to the ON position until you hear a click to turn on the turntable player. The turntable player defaults to turntable mode, and the LED indicator glows green.

Turning the record player off: To turn the record player off, turn the Power/Volume Knob counter-clockwise to the OFF position until you hear a click.

Turntable Mode

Step 1: Take out the magnetic record holder on the platter, place a vinyl record on the platter so that the center hole aligns with the spindle, then place the magnetic record holder back to fix the vinyl record.

Overview

1. Record Player Guitar Handle
2. Speaker
3. Stylus
4. Stylus handle
5. Tonearm
6. Tonearm Lock
7. Tonearm Lift Lever
8. DC 12V Power Input Jack
9. RCA Audio Out Ports
10. AUX In port
11. Mode Knob
12. Speed Knob
13. Power/Volume Knob
14. Status LED indicator
15. Platter
16. Magnetic Record holder

Preparation for use

Caution: when unpacking and moving, please carefully and gently take the Record Player out; and place it in a safe and horizon-tal location to avoid any damage to the stylus.

Install the guitar handle
Step 1: Align the notch of the guitar handle with the opening of the Record Player’s main body, then connect the guitar handle to the main body.

Step 2: Use a screwdriver to tighten the included two black screws (PWA4 / 1.57 inches sized) to fix the guitar handle on the main body of the Record Player.

Wall mounting

Step 1: Set the mounting holes on the wall. The length of the wall needs to be more than 41.3 inches (1050 mm), and the width needs to be more than 15.7 inches (400 mm).

1. Hold the back of the Record Player against the wall, and choose the position where you want to place it. Mark the top of the mounting bracket of the Record Player, then draw a horizontal line across it; and draw a vertical center line of the Record Player.
2. Place and align the top of the in-cluded wall bracket with the marked horizontal line, and align the center line of the wall bracket with the marked vertical center line.
3. Mark the positions of the mounting holes on the wall bracket, then drill the four mounting holes on the wall.

Step 2: Insert the included four plastic dowels into the mounting holes. The open-ing end of the plastic dowels must be level with the wall surface.

Step 3: Use a screwdriver to tighten the included four mounting screws (KA4 / 1.18 inches sized) to fix the wall bracket onto the wall.

Step 4: Hang the Record Player onto the wall through the mounting bracket.

Powering On/Off

Connecting to the DC power supply
Connect the included Power Adapter to an AC power source and the DC 12V/1A Power Input Jack of the Record Player.

Turning the Turntable Player on
After connecting to the power supply, turn the Power/Volume Knob clockwise to the “ON” position until you hear a click to turn on the turntable player. The Turntable Player defaults to turntable mode, and the LED indicator glows green.
Turning the Record Player off
To turn the Record Player off, turn the Power/Volume Knob counter-clockwise to the “OFF” position until you hear a click.

Turntable Mode

Playing a record

Step1. Take out the magnetic record holder on the platter, place a vinyl record on the platter so that the center hole aligns with the spindle, then place the magnetic record holder back to fix the vinyl record.

Step2. Turn the Speed knob to select the desired platter rotation speed (33/45/78 RPM), and turn on the Record Player.
When the Record Player is on, it will enter Turntable mode by default. The Status LED indicator will glow green. If it is in another play mode, twist the Mode Knob counter-clockwise to select Turntable mode.

Note: When playing a 45 RPM record, use the 45 RPM adaptor (not included).

Step3. Remove the protective cap from the Stylus and unlatch the Tonearm Lock. Push the Tonearm Lift Lever backward to raise the tone arm and grasp the stylus handle with your hand to gently move the Stylus to the desired position over the record. The
Record Player begins to spin when the Stylus moves toward the vinyl record.

Step4. Push the Tonearm Lift Lever forward to lower the Stylus slowly onto the desired position of the record to begin playing the vinyl record.

Step5. Turn the Power / Volume button clockwise or counter-clockwise to adjust the playback volume. When the record playback ends, the Record Player will stop automatically.

• Pausing the record

Gently lift the Stylus and Tonearm with the Tonearm Lift Lever.

• Stopping the record

Step1. Gently lift the Stylus and Tonearm with the Tonearm Lift Lever.

Step2. Set the tonearm to the Tonearm Lock (Rest position) and secure it with the lock. The Platter automatically slows down and stops rotation.

Step3. Turn the Power/Volume knob counter-clockwise to the “OFF” position until you hear a click.

Step4. Remove the record after the Platter has come to a complete stop.

Bluetooth Mode

Input music from external devices via Bluetooth (Bluetooth In)

Step1. Turn the Record Player on, then press the Mode knob to select Bluetooth mode. The Status LED indicator will flash blue.

Step2. Turn on Bluetooth in your device’s settings and search for ‘‘Eklectik TT110’’, then tap ‘‘Eklectik TT110’’ to connect.

Connected to a device

(Successfully paired with your device).

| The Status LED indicator glows solid blue.
Connected tone notification

Note: the Record Player will automatically be paired with your last successfully connected media device the next time it turns on.

Step3. Once your Record Player is connected to a Bluetooth audio source device successfully, music and other audio will be playable on the Record Player. You can control the music directly from the Bluetooth device.

Output music to external devices via Bluetooth (Bluetooth Out)

Step1. In Turntable mode or AUX IN mode, press and hold the Mode knob to select Bluetooth mode. The Status LED indicator will flash blue.

Step2. Turn on your device (like a Bluetooth speaker) and select Bluetooth mode in your device’s setting, then the Record Player will automatically be paired with your device. If it is successfully connected, the Status LED indicator glows solid blue for 2 sec onds, then turns solid green (Turntable mode) or red (AUX IN mode). And the music will be output to your device for playback.

Tip: You can also raise or lower the volume of the Record Player by turning the Power/Volume Knob clockwise or counter-clockwise.

AUX-In Play Mode

You can play other music sources (Smartphone, iPod, or digital audio players) through the Record Player by connecting the AUX IN
Port to your external player’s audio out jack or headphone jack.

Step1. Plug one end of an audio cable (not included) into the AUX IN port of the Record Player and the other end of the audio cable into the Audio Out Jack of your digital audio player.

Step2. Turn the Record Player on, then twist the Mode Knob clockwise to select AUX IN mode. The Status LED indicator will glow red.

Step3. Control the music directly from your external audio player.

Tip: You can also raise or lower the volume of the Record Player by turning the Power/Volume Knob clockwise or counter-clockwise.

RCA Mode

Output music to external devices
To output music to external speaker, you can connect the speaker to the Record Player using the RCA audio cable (Red colored connector for the right audio channel port, white colored connector for the left audio channel port), as shown in the following figure below.

In The Box

• 1x Record Player
• 1x AC/DC Power Adapter
• 1 x Mounting Kit
• 1x User Manual

Specifications

and RCA Audio Out for connection with the music system

Speeds| Three optional speeds: 33 RPM, 45 RPM or 78 RPM
Wow and flutter| < 0.4 %
S/N Ratio at 1KHz 0 dB| > 50 dB
Frequency Response| 60Hz-20kHz
Bluetooth Version| V5.1
Operation Range| 33 ft (10M)
Power Input| DC 12V, 1A
Power adapter| Power Input: AC 110-120V, 60Hz, Power Output: DC 12V, 1A
Power Consumption| 15 W (Max.)
Standby Power Consumption| 7.5 W
Dimension| 41.3×15.8×2.72” (1050×400×69 mm)
Weight| 315.7oz (8.95 kg)

Note: Specifications are subject to change without notice.

Maintenance and Care

Replacing the stylus

Step 1. Gently pull down the front edge of the Stylus.

Step2. Pull the Stylus forward.

Step3. Pull the Stylus out to remove it.

Step4. Position a new Stylus with its needle tip facing down.

Step5. Align the back of the Stylus with the cartridge.

Step6. Insert the Stylus with its front end at a downward angle and gently lift the front of the Stylus until it snaps into place.

Care and Maintenace

1. DO NOT leave any vinyl record on the Record Player after use.
2. Store vinyl records in their original package.
3. Return the tonearm to the rest position after use, and secure it with the lock.
4. Unplug all power and input/output cables when not in use.
5. Gently wipe to clean the device with a soft dry cloth. Never apply harsh chemicals or solvents to any part of the turntable

Troubleshooting

plugged into the device and plugged into a working outlet.

Make sure that the Power/Volume knob has been turned clockwise to the “ON” position.

You cannot connect the Record Player to your Bluetooth device (phone, laptop, tablet, etc.).| Ensure the Record Player is not connected to another device. If it is, open Bluetooth settings on those devices and tap “Forget device” on “Eklectik TT110”. Confirm the device you would like to pair with is Bluetooth enabled, and refer to that device’s user manual to confirm.
The Record Player is making noises.| Make sure that your record is not damaged or warped. If the problem persists, replace the stylus.
The record is skipping/ jumping.| Make sure that the stylus and record surface are clean. And make sure no shock or vibration during the music playback.

Safety Statement

Safety Precautions

1. When moving the Record Player, handle it gently, gripping it at each side.
2. Do not touch the needle tip with your fingers; avoid bumping the needle against the turntable platter or record edge.
3. Avoid dropping and shocking.
4.  Do not disassemble this device.
5. Do not expose this device to rain or moisture or submerge it in water.
6. Ideal temperatures are 0°C to 35°C. Avoid extreme temperatures.
7. Keep the device away from excessive heat, such as sunshine, fire, or the like.
8. Do not use the device outdoors during thunderstorms.
9. Use original or certified cables.
10. Keep out of reach of children. It contains small parts which may be a choking hazard.
11. Avoid environments subject to vibration, excessive dust, cold, or moisture.
12. To prevent damage to your device’s parts or internal circuits, do not use it in dusty, smoky, damp, or dirty environments.
13. Do not use, store or transport the device where flammables or explosives are stored. Using your device in these environments increases the risk of explosion or fire.

FCC compliance statement

FCC ID: 2AMSOSTW002
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.
   Changes or modifications to this product not authorized by Electik could void the electromagnetic compatibility (EMC) and wireless compliance and negate your authority to operate the product.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equip- ment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio / TV technician for help.

FCC Radiation Exposure Statement:
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.

Disclaimer
All information, design, and specifications contained in this manual were correct at the time of this publication. As the product goes under continuous upgrades and changes. However, the final device may have slight differences. The contents of this manual are subject to change without prior notice; Eklectik will not be liable for any errors contained herein or for incidental or consequential damages in connection with the furnishing performance or use of this manual.
Eklectik COPYRIGHT© 2022 ALL RIGHTS RESERVED.

Eklectik One Year Limited Warranty

WARRANTY Eklectik LIMITED WARRANTY (“Warranty”) – For product Categories Listed in Chart Below (as applicable, “Product”) Before returning your Product for service under this Warranty, please (i) read the instruction manual carefully. If you are still having trouble with your Product, please contact Technical Support at support@EklectikTech.com. Warning: Some Products may contain components that are small enough to be swallowed. Please keep out of reach of children. Subject to the terms and conditions herein, Eklectik warrants to the original purchaser of the Product (“Customer”) that for the applicable Warranty Period listed below, the Product will be free from defects in material or workmanship under normal, non-commercial use (“Defects”).

Warranty Period encompasses, as listed below, separate “Coverage Periods” for Parts and Labor, each Coverage Period for one year, to begin from the original date of Customer purchase. If Customer returns a defective Product (or any component thereof) during the applicable Warranty Period, Eklectik will, at its option, during the specified Coverage Periods for Parts and Labor (as applicable) either: (i) repair the Product (or, as applicable, any component thereof) or (ii) replace the Product (or, as applicable, any component thereof) with a new or refurbished Product (or, as applicable, any component thereof), in either case free of charge to Customer for Parts and/ or Labor (as applicable) during the specified Coverage Period only, and excluding applicable shipping charges (noted below), for which the Customer is responsible. The foregoing states the Customer’s exclusive remedy and Eklectik’s sole liability for breach of the limited warranty contained herein.

This Warranty specifically excludes any Product (or, as applicable, any component thereof) that has been subject to or Defects resulting from: (a) any neglect or misuse by a Customer, an accident, improper application, violation of operating instructions for the product, any other Customer-induced damage, or the alteration or removal of any product serial number: (b) any modification or repair to Product (or, as applicable, any component thereof) by any party other than Eklectik or a party authorized in writing by Eklectik; (c) any damage to Product (or, as applicable, any component thereof) due to power surges, incorrect electrical voltage, misconnection 17 to any device, or malfunction of any device used with the Product (or, as applicable, any component thereof); (d) cosmetic damage to the Product (or, as applicable, any component thereof) caused by normal wear and tear; (e) shipping damage that occurs while the Product is in transit; (f) damage caused by heat sources, sunlight, electromagnetic conditions, or other climatic conditions; or (g) any acts of God. Product is sold to Customer for personal, non-commercial use only. Product is not warranted for Customer’s commercial or rental use.

In addition, Product is not warranted against failure, and should not be used by Customer for any application where (i) there is a risk that any data stored on Product will be breached or otherwise compromised, or (ii) the data stored on Product is relied upon for medical or lifesaving applications. Eklectik disclaims any Warranty for any of the foregoing uses to the fullest extent permitted by law. Customer assumes any and all risks associated with such uses of Product and agrees to indemnify Eklectik for any damages claimed against Eklectik for such uses. EXCEPT FOR EXPRESS WARRANTIES STATED ABOVE AND TO THE MAXIMUM EXTENTPERMITTED BYLAW, THE PRODUCTS ARE PROVIDED “AS IS”, AND SUMMIT ELECTRONICS LLC DISCLAIMS ALLOTHER WARRANTIES, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY(I) OF MERCHANTABILITY, (II) OF FITNESS FOR APARTICULAR PURPOSE, OR (III) OF NON-INFRINGEMENT OF THIRD-PARTY RIGHTS. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT WILL EKLECTIK BE LIABLE TO CUSTOMER OR ANY THIRD PARTY FOR ANY INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, EXEMPLARY OR PUNITIVE DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY LOST PROFITS OR REVENUES, LOSS OR INACCURACY OF ANY DATA OR COST OF SUBSTITUTE GOODS, REGARDLESS OF THE THEORY OF LIABILITY (INCLUDING NEGLIGENCE) AND EVEN IF EKLECTIK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, EKLECTIK’S AGGREGATE LIABILITY TO CUSTOMER FOR ACTUAL DIRECT DAMAGES FOR ANY CAUSE WHATSOEVER SHALL BE LIMITED TO THE CUMULATIVE PRODUCT FEES PAID BY THAT CUSTOMER FOR THE PRODUCT CAUSING THE DAMAGES, IF ANY. This Warranty gives Customer specifics rights, and Customer may also have other rights that vary from jurisdiction to jurisdiction. To obtain Warranty service, Customer must email Eklectik Technical Support prior to making a Product return. Customer must include with Product return the following items (failure to enclose any of these items may result in a delay in the processing of your Warranty claim): (i) a dated sales receipt that indicates the place of purchase, model number of Product, and amount paid; (ii) a detailed description of Customer’s problem with Product; (iii) Customer’s full name, phone number, and return address, and; (iv) a money order made out to Eklectik to cover return shipping charges to US destinations only Eklectik will not make return shipments to a P.O. Box. For shipping to international addresses, actual freight will be charged to Customer.
Return your Product freight-prepaid in its original packaging, or packaging that affords an equal measure of protection. Please allow 4 to 6 weeks for the processing of your claim (6 to 8 weeks from November to February).

Where to ship product
Eklectik® Returns Department
1 Rewe Street
2nd floor
New York, NY 11211

If you have any questions, please contact Eklectik® at support@EklectikTech.com or visit https://www.eklectiksound.com.

References

• eklectiktech.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>