PHILIPS DN460B GreenSpace Mini LED Downlight Instructions

June 3, 2024
Philips

DN460B GreenSpace Mini LED Downlight
Instructions

DN460B GreenSpace Mini LED Downlight

GreenSpace Downlight
DN460B, DN461B, DN462B, DN463B, DN470B, DN471B, DN472B, DN473B
PHILIPS DN460B GreenSpace Mini LED Downlight fig 1PHILIPS DN460B GreenSpace Mini LED Downlight fig
2

– The luminaire shall be installed by a qual wired in accordance with the latest IEEelectrical regulations or the national requirements.
Only to be installed outside arms reach as recessed ceiling luminair.
“The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced”.
PHILIPS DN460B GreenSpace Mini LED Downlight fig 3

ATTENTION
OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES

Data subject to change without notice
Keep for future reference: www.lighting.philips.com
The luminaire shall, under no circumstance, be covered with thermal insulation matting or similar material.PHILIPS DN460B GreenSpace Mini LED Downlight fig
5PHILIPS DN460B GreenSpace Mini LED Downlight
fig 6

Specific PSED-E to PSD-VLC-E/DEIA-VLC-E downlight versions available on request for use in central DC emergency system to meet standard EN60598-2-22.PHILIPS DN460B GreenSpace Mini LED Downlight fig
7PHILIPS DN460B GreenSpace Mini LED Downlight
fig 8PHILIPS DN460B GreenSpace Mini LED
Downlight fig 9PHILIPS DN460B GreenSpace
Mini LED Downlight fig 10 Disconnect before servicing
Luminaire has basic insulation between Low tage supply and control conductors. The light source and/or control gear and/or the external flexible cable ontained in this luminaire shall only be replaced by the manufacturer or service agent or a similar qualified person.
Storage, installation, use, operation and maintenance of the products needs to be performed exactly according the instructions in this manual and/or other instructions as may be provided by us to guarantee safe use of the product over its entire lifetime. Failure to adhere to these instructions will invalidate your entitlement to warranty. Bolts with indication of torque strength on the drawing need to be tightened using a calibrated torque wrench. Pre-assembled bolts need to be retightened again to the required torque specification to assure maximum strength over lifetime.
This product contains a light source of energy efficiency class: see table or label.

All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use.
Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights.

Signify Holding
The Netherlands
28-05-2021
Approved

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals