Metalux 22FPX Configurable LED Panel User Manual

Metalux 22FPX Configurable LED Panel

Product Information

• Specifications
  • Product: 22FPX LED Panel
  • Type: 2′ x 2′ Configurable LED Edge Lit Panel
  • Mounting: Recessed in Insulated Ceilings or Suspended/Surface Mount
• Product Features
  • The 22FPX LED Panel offers the following top features:
  • WaveLinx LITE and WaveLinx PRO compatibility
• Configurable Flat Panel design
  • Various options for LED lumen output and color temperature
  • Multiple voltage and driver options for flexibility
  • Emergency battery pack and sensor integration available
• Dimensional and Mounting Details
  • Width: 23-3/4″ [602mm]
  • Length: 23-3/4″ [602mm]
  • Depth: 1-17/32″ [41mm]
• Order Information
  • SAMPLE ORDER NUMBER: 22FPX-32-L840-WLS

Product Usage Instructions

• Mounting Options
  • The 22FPX LED Panel can be installed in insulated ceilings or mounted on the surface. Follow the installation guidelines provided in the manual for proper mounting.
• Driver and Voltage Selection
  • Choose the appropriate driver type and voltage based on your specific requirements. Refer to the product specifications to select the suitable options for your application.
• Emergency and Sensor Integration
  • If emergency lighting or sensor integration is needed, ensure to select the correct options during installation. Follow the wiring instructions provided to connect these components properly.

FAQs

• Q: Can the LED lumen output be customized?
  • A: Yes, the LED lumen output can be customized based on the available options provided in the product specifications.
• Q: Are there international voltage options available?
  • A: Yes, the product is available in non-US voltages and frequencies for international markets. Ensure to select the appropriate voltage option during purchase.
• Q: Is dimming functionality supported?
  • A: Dimming functionality is supported with specific driver types such as DALI Driver, Step Dimming Driver, Lutron HiLume, and Sensor-ready Driver. Choose a suitable driver based on your dimming requirements.

Interactive Menu

• Order Information page 2
• Photometric Data page 4
• Control Solutions page 5
• Product Warranty

Top Product Features

• Variety of controls and emergency battery pack options in all sizes
• Low profile perfect for renovation or new construction
• Contractor-friendly, quick and easy install
• Available in 3000K, 3500K, 4000K, and 5000K CCT
• Standard and high efficacy options available
• Options to meet Trade Agreements Act requirements

22FPX LED Panel

• 2′ x 2′ Configurable LED Edge Lit Panel Recessed in Insulated Ceilings or Suspended/Surface Mount additional product diagrams

Typical Applications

• Commercial Office Spaces
• Schools
• Healthcare
• Retail Merchandising Areas

Product Certification

Dimension

Dimensional and Mounting Details

• Shown with either a Sensor OR Integrated Emergency test switch.
• For units with both Emergency and Sensor, there is one holder on each end.

Order Information

SAMPLE ORDER NUMBER: 22FPX-32-L840-WLS

DOMESTIC PREFERENCES

Accessories/Ordering Information (20)

Surface Mount Kit – Surface box with sufficient clearance for all options

Notes : The surface mount kit is deep enough to fit all available options. Cannot be used with the FPSURF version.

Ceiling Retention

Required by some local codes Order one set for each fixture (Four clips per kit)

Suspension Kit

cable, carabiner, ceiling connection, SO cord, cord connectors and round 4″ J-box cover plate
Mounting height from ceiling Min. =7-1/4″ [184mm] Max.=27″ [286mm]

Drywall Frame Kit

Load Data (CD most common driver)

Shipping Data

Product Specifications

Construction

• The narrow aluminium bezel is tightly held to a deformed code gauge steel back plate with a flush perimeter and internal gasket
• Seamless corners to maximize the light-emitting surface with a refined finish

Mounting

• Integral grid clips and separate suspension clips are provided for installation flexibility when additional retention is required
• The junction box is constructed of code gauge galvanized steel with an easy-access hinged door
• Multiple trade-size knockouts are provided on the top and sides
• Stock luminaire is less than 2.5″ for use in the shallow plenum or low ceiling spaces
• Surface mounting kits available
• Suspension options available from the factory
• Factory-installed flexible cable with dimming leads options available

Limited Warranty

• Five-year limited warranty

Integrated Controls

• Standard with 0-10V dimming driver (10% standard, 1% optional)
• Integrated WaveLinx options provide wireless individual fixture control and enable code compliance, increased energy savings, grouping of fixtures, and connection to WaveLinx control systems
• DALI 2.0, Lutron, and step-dimming available

Electrical

• Standard and High Efficacy models available
• LED’s available in 3000K, 3500K, 4000K, and 5000K with a minimum of 80 CRI
• Colour accuracy ≤3-Step MacAdam ellipse (SDCM)
• Projected lumen maintenance based on TM21 testing standards is L73 > 60,000 hours

Optical Shielding

• Light guide with specialized features to optimize light extraction
• White frost lens with a smooth pattern for uniform illumination
• Scratch and impact-resistant

Compliance

• Indoor luminaires are cULus listed for 25C ambient environments
• IC rated for direct insulation contact
• RoHS compliant
• Damp location listed
• IESNA LM-79 and LM-80 standards compliant
• Can be used for the State of California Title 24 high efficacy luminaire
• Meets IP5X rating from the room side with no modification needed
• ATW-SW4 option is available for CCEA (Chicago Plenum) compliance
• The fixture is rated for NSF/ANSI standard 2 – A light fixture for Splash Zone and Non-Food Zone

Emergency Battery Options

• The 120V-277V integral emergency battery pack comes in 7-watts, 10-watt, or 14-watts
• Self-diagnostic emergency battery available in 10 or 14-watt (NFPA 101® Life Safety Code®)
• Constant power to the LED system for controlled, predictable discharge
• Integrated test switch/indicator light visible from the floor
• Min. 90-minute backup period for code compliance
• Integral emergency transfer relay available for generator-equipped power systems

Photometric Data

• 22FPX-25-L840-HE-WPS
  • Electronic Driver
  • Linear LED 4000K
  • Spacing criterion: (II) 1.25 x mounting height,
  • (⊥) 1.24 x mounting height
  • Lumens: 2539
  • Input Watts: 19.8W
  • Efficacy: 128.2 LPW
  • Test Report: 22FPX-25-L840-HE-WPS.IES
• 22FPX-42-L840-WPS
  • Electronic Driver
  • Linear LED 4000K
  • Spacing criterion: (II) 1.25 x mounting height, (⊥) 1.24 x mounting height
  • Lumens: 4545
  • Input Watts: 40.3W
  • Efficacy: 112.8 LPW
  • Test Report: 22FPX-42-L840-WPS.IES
• 22FPX-32-L840-WPS
  • Electronic Driver
  • Linear LED 4000K
  • Spacing criterion: (II) 1.25 x mounting height,
  • (⊥) 1.24 x mounting height
  • Lumens: 3543
  • Input Watts: 30.4W
  • Efficacy: 116.6 LPW
  • Test Report: 22FPX-32-L840-WPS.IES

Energy and Performance Data by Catalog Number

Catalogue| Delivered Nominal Lumens| Watts| Efficacy (lm/W)| Input Current (A)
---|---|---|---|---
120V| 277V
22FPX-21-L840-HCD| 2494| 21.5| 116.0| .18| .08
22FPX-25-L840-HE-HCD| 2551| 20.5| 124.6| .17| .07
22FPX-32-L840-HCD| 3560| 31.2| 114.1| .26| .11
22FPX-42-L840-HCD| 4567| 41.5| 110.1| .35| .15
22FPX-32-L840-WPS| 3543| 30.4| 116.2| .25| .11
22FPX-42-L840-WPS| 4545| 40.3| 112.8| .34| .15

Lumen Calculator

CCT Multiplier| ****

80 CRY

---|---
3000K| 0.94
3500K| 1.00
4000K| 1.00
5000K| 1.03

Example of Lumen Adjustment Calculation

• 22FPX-32-L830-HCD
• at 3000K
• Lumen Adjustment Factor = 0.94
• Total Light Output =
• 3,560 lm x 0.94 = 3,360 lm
• Efficacy 107.7 lm/W

Dimensional and Mounting Details

Control Solutions

• WaveLinx LITE wireless
• WaveLinx PRO Wireless
• WaveLinx CAT wired
• WaveLinx Wired

Integrated Sensor Coverage Pattern

Note: Installation of integrated sensors within 3-ft (1m) of HVAC air vents is not recommended. The pattern shown is intended solely as a general guide and is not to scale.

Systems comparison chart

Cooper Lighting Solutions provides many lighting system solutions designed to satisfy code requirements and meet the unique needs of any project. The FPX with WaveLinx offers no-hassle lighting control with multiple luminaire level control solutions.

• WaveLinx PRO is a wireless lighting control solution, for connected spaces, that significantly reduces a building’s energy consumption. From a single floor to an entire campus, WaveLinx PRO connects more than lighting assets; it shares aggregated sensor data with the WaveLinx CORE platform and other building systems, so building owners can improve operations, space environment, and tenants’ experience. WaveLinx PRO offers a rich portfolio of wireless devices, WaveLinx PRO-enabled luminaires, and an intuitive WaveLinx mobile app for office, education, warehouse, and parking garage applications.
• WaveLinx LITE is a cost-effective, wireless digital lighting control solution, with out-of-the-box functionality, that saves energy and meets code. It’s designed for applications that require occupancy-based, daylighting, or manual light control. Customize installations for office, education, warehouse and parking garages using the secure, simple mobile app.

Add a hidden WaveLinx sensor node (WPN, WLN) to your space lighting design!

• Allows to:
  • Keeps luminaire aesthetics
  • Connect fixtures without the realestate to include sensor options such as downlights
  • Connect sealed fixtures without a standard sensor option such as products for clinical space.

Integrated Controls Options

Option| Out of the Box Functionality| Luminaire Level Lighting Control (LC)| Automatic Dimming Photocell| Occupancy Sensing| CCT

Control

WLS| X| X| X| X|
WLN|  | X|  |  |
WPS|  | X| X| X| X
WPN|  | X|  |  | X

Note: WaveLinx utilizes scenes to allow users to change an area’s fixtures Correlated Color Temperature (CCT) and intensity using commissioned manual wireless wall station scene control. To enable CCT adjustments through WaveLinx, include WPS or WPN devices in addition to VividTune or BioUp technologies for integrated fixture control.

CONTACT

• Cooper Lighting Solutions
• 1121 Highway 74 South
• Peachtree City, GA 30269
• P: 770-486-4800
• www.cooperlighting.com.
• © 2024 Cooper Lighting Solutions
• All Rights Reserved.
• Specifications and dimensions
• subject to change without notice.
• PS519320EN April 18, 2024, 2:42 PM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>