Metalux IB51931422 UHBS Round LED High Bay Instruction Manual

June 12, 2024
METALUX

Metalux IB51931422 UHBS Round LED High Bay

Product Information

IMPORTANT : Read carefully before installing fixture. Failure to comply with these instructions may result in death, serious bodily injury, and property damage. Retain for future reference.
WARNING : Risk of Burn – Disconnect power and allow fixture to cool before handling or servicing. Risk of Personal Injury – Due to sharp edges, handle with care.

Instructions for Selecting CCT & Lumen:

Warning: Be sure fixture is not powered or energized before sliding switches to change CCT or lumen.

  1. Two slide switches are located in the center of UHBS lens: one for CCT and the other for lumen (or watt). CCT and lumen (or watt) options must be selected before final install. Do not slide switches when the fixture is energized.
  2. To select the CCT, slide the first switch to the desired LED color temperature (4000K, 5000K CCT).
  3. To select the lumen, slide the second switch, marked Watt, to the desired power level or wattage.

Note : CCT and lumen options are selectable for models UHBS-1218 and UHBS-2436.

Luminaire Installation:

  1. Install hook. (See Figure 1)
  2. Install and tighten the set screw. (See Figure 2)
  3. Hang the fixture to the structure (by others). (See Figure 3)
  4. Install and tighten screw. Attach included safety cable to existing or new structure. Do not use cord or wiring to hang fixtures. (See Figure 4)

Sensor Accessory Installation Instructions:

Note : Sensor and remote control are not included with the luminaire. Items sold separately.
Refer to sensor instruction sheet found at www.cooperlighting.com. For additional high-bay accessories, scan QR code.
Note : CCT and lumen options are selectable for models UHBS-1218 and UHBS-2436.

Additional Information:

Emergency Battery installation instructions can be found at www.cooperlighting.com. Emergency Battery sold separately and is not included with the luminaire.
For more information, scan this QR Code.

IMPORTANT: Read carefully before installing fixture. Failure to comply with these instructions may result in death, serious bodily injury and property damage. Retain for future reference.

WARNING

  • Risk of Fire, Electrical Shock, Cuts or other Casualty Hazards- Installation and maintenance of this product must be performed by a qualified electrician. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
  • Risk of Fire and Electric Shock- Make certain power is OFF before starting installation or attempting any maintenance. Disconnect power at fuse or circuit breaker.
  • Risk of Fire- Minimum 90°C supply conductors.
  • Risk of Burn- Disconnect power and allow the fixture to cool before handling or servicing.
  • Risk of Personal Injury- Due to sharp edges, handle with care.

DISCLAIMER OF LIABILITY:

  • Cooper Lighting Solutions assumes no liability for damages or losses of any kind that may arise from the improper, careless, or negligent installation, handling or use of this product.
  • NOTICE : Green ground screw provided in proper location. Do not relocate.
  • NOTICE : The fixture may become damaged and/or unstable if not installed properly.
  • Note : Specifications and dimensions subject to change without notice.

ATTENTION Receiving Department:

Note actual fixture description of any shortage or noticeable damage on delivery receipt. File claim for common carrier (LTL) directly with carrier. Claims for concealed damage must be filed within 15 days of delivery. All damaged material, complete with original packing must be retained

Wiring Diagram

INSTRUCTIONS FOR SELECTING CCT & LUMEN

  1. Warning: Be sure fixture is not powered or energized before sliding switches to change CCT or lumen.
  2. Two slide switches are located in center of UHBS lens: one for CCT and the other for lumen (or watt). CCT and lumen (or watt) options must be selected before final install. Do not slide switches when fixture is energized.
  3. To select the CCT, slide the first switch to the desired LED color temperature (4000K, 5000K CCT).
  4. To select the lumen, slide the second switch, marked Watt, to the desired power level or wattage

Emergency Battery installation instructions can be found at www.cooperlighting.com
Emergency Battery sold separately and is not included with the luminaire.
For more information scan this QR Code.

Luminaire Installation

  1. Install hook. (Figure1.)
  2. Install and tighten the set screw. (Figure 2.)
  3. Hang fixture to structure (by others). (Figure 3.)
  4. Install and tighten screw. (Figure 4.) Attach included safety cable to the existing or new structure. Do not use cord or wiring to hang fixtures.

Sensor Accessory Installation INSTRUCTIONS

  • Sensor and remote control not included with the luminaire.
  • Items sold separately.
  • Refer to the sensor instruction sheet found at www.cooperlighting.com. For additional high-bay accessories, scan QR code.

Warranties and Limitations of Liability

Please refer to www.cooperlighting.com for our terms and conditions.

Cooper Lighting Solutions 1121 Highway 74 South Peachtree City, GA 30269 P: 770-486-4800
www.cooperlighting.com
Canada Sales
5925 McLaughlin Road Mississauga, Ontario L5R 1B8 P: 905-501-3000
F: 905-501-3172
© 2022 Cooper Lighting Solutions All Rights Reserved
Publication No. IB51931422 October 13, 2022
Cooper Lighting Solutions is a registered trademark. All trademarks are property of their respective owners.
Product availability, specifications, and compliances are subject to change without notice

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals