FUNPOWER FT0314HD Remote Control Transmitter User Manual

FUNPOWER FT0314HD Remote Control Transmitter

Product Information

Specifications

• Model: FT0314HD Remote Control Transmitter
• Power Source: 2 x 1.5V AAA batteries
• FCC ID: 2ABUP-FT031XHD
• IC Caution: IC25540-FT031XHD

Product Usage Instructions

LED Indicator
The LED indicator controls the ON/OFF status of the fan.

Speed Control
The fan speed can be adjusted from level 1 to level 6 using the + and – keys.

Breeze Mode Timer
This mode provides a variation in fan speed between Speed 2 and Speed 4 at regular intervals.

Lighting Control
Control the ON/OFF status and brightness of the lighting using the corresponding buttons.

Color Temperature Adjustment
Change the color temperature of the light by pressing the dedicated button.

Fan Direction
Adjust the direction of the fan to blow air either downwards or upwards, suitable for summer or winter use respectively.

Timer Control
Set the fan to automatically turn off after 2, 4, or 8 hours using the timer function.

Battery Installation
Ensure correct installation of 2 x 1.5V AAA batteries in the transmitter.

Use Precautions

1. If the LED indicator does not turn on when pressing a key, check the battery installation.
2. If the LED indicator flashes, it indicates low battery voltage; replace with new batteries.
3. Remove batteries from the transmitter when not in use for an extended period.

FCC Instructions

• FCC ID: 2ABUP-FT031XHD
• IC Caution: IC25540-FT031XHD

FAQs

• Q: How do I know if the battery in the transmitter needs to be replaced?
  A: If the LED indicator on the transmitter is flashing when a key is pressed, it indicates low battery voltage and requires replacement.

• Q: Can I adjust the brightness of the lighting with this remote control?
  A: Yes, you can adjust the brightness of the lighting using the + and – keys on the remote control.

Operation Instructions

1. LED indicator

   • Gear display.
   • Other key functions effective indication.

2. OFF the Fan and lighting

3. ON/OFF the Fan

   • When fan shut down, press this button, the fan run at the speed before fan shutdown.
   • When fan are on, press this button, the fan shut down.

4. Speed of the fan (1~6 level)

   • The “+” key increases the fan gear. The higher the gear, the higher the fan speed.
   • The “-” key lowers the fan gear, and the lower the gear, the lower the fan speed.
   • The number of indicators displayed corresponds to the current fan gear.
   • The lowest gear is 1st gear and the highest gear is 6th gear.

5. ON/OFF the Lighting

   • When the light is off, press this button to turn it on.
   • When the light is on, press this button to turn it off.

6. Brightness control

   • The “+” key increases brightness.
   • The “-” key lowers brightness.

7. Breeze Mode: Between Speed 2 to Speed 4, at 40 seconds in a curve and circle speed. Reach one specific speed, it changes to another speed.

8. Color temp adjust: Press this button to change the color temperature of the light.

9. Fan timing control
   Set up the timer at 2 hours, 4hours , 6 hours.
   2H press this key, the fan will stop after 2 hours.
   4H press this key, the fan will stop after 4 hours.
   8H press this key, the fan will stop after 8 hours.

   • The timing function of the key works when the fan is running.
   • Press the key “+”or”-” will cancel the timer.
   • The latest timer will take place the previous one.
   • The number of LED lights corresponds to the number of hours when the fan is shut down.

10. Direction of the fan

    • Press the key to control the direction of the fan to make the wind blow on the ground. It is usually used in summer. Press and hold this key for 5 seconds to turn on this function. At the same time, the LED lights will display from bottom to top in order. Finally, all the indicators will turn on and off.
    • Press the key to control the direction of the fan, so that the wind blows upward from the ceiling. It is usually used in winter. Press and hold this key for 5 seconds to turn on this function. At the same time, the LED lights will be displayed in order from top to bottom. Finally, all the indicators will turn on and off.

11. The transmitter use 2pcs of 1.5V AAA battery, please install the battery correctly.

Use precautions

1. When press the key of the transmitter, the LED indicator doesn’t on, please inspect the battery installation.
2. When press the key of the transmitter, the LED indicator flashing, which means the battery get low voltage, please replace a new one.
3. Please pull out of the battery from the transmitter when leaving unused for a long time.

FCC Instructions

This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If the product does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the product and receiver.
• Connect the product into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause Undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the product.
FCC ID: 2ABUP-FT031XHD

IC Caution:
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RF exposure statement:
The equipment complies with IC Radiation exposure limit set forth for uncontrolled environment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>