WeDoInnov POD7 Wireless Speakerphone Kit User Manual
- June 14, 2024
- WeDoInnov
Table of Contents
WeDoInnov POD7 Wireless Speakerphone Kit
Product Information
Specifications:
- Compliance: Part 15 of the FCC Rules
- Radiation Exposure Limits: FCC approved
- Minimum Distance: 20cm between radiator and body
Product Usage Instructions:
1. Safety Precautions
Before using the product, please read and understand the following safety precautions:
- Do not make any changes or modifications to the device that are not explicitly approved by the manufacturer. Doing so may void your authority to operate the equipment.
- Ensure that the device is operated in compliance with Part 15 of the FCC Rules.
- The device should not cause harmful interference to other devices, and it must accept any interference received.
- When installing and operating the equipment, maintain a minimum distance of 20cm between the radiator and your body.
2. Installation
To install the product, please follow these steps:
- Select a suitable location for installation, ensuring that it meets the minimum distance requirement of 20cm between the radiator and your body.
- Place the product in the chosen location and ensure it is stable and secure.
- Connect any necessary cables or power sources as described in the product’s accompanying documentation.
3. Operation
To operate the product, please adhere to the following guidelines:
- Ensure that all connections are properly made and secure before powering on the device.
- Refer to the product’s user manual for specific instructions on how to use the device’s features and functions.
- If you experience any interference or undesired operation, try adjusting the location of the device or consulting the troubleshooting section of the user manual.
4. Maintenance
To maintain the product’s performance and prolong its lifespan, please consider the following:
- Regularly clean the device using a soft, dry cloth to remove any dust or debris.
- Avoid exposing the product to excessive heat, moisture, or direct sunlight.
- Follow any additional maintenance instructions provided in the user manual or accompanying documentation.
FAQ (Frequently Asked Questions)
Q: Can I modify the device to enhance its performance?
A: No, any changes or modifications not explicitly approved by the manufacturer may void your authority to operate the equipment.
Q: What should I do if I experience interference from the device?
A: Try adjusting the location of the device and ensure it is operated in compliance with Part 15 of the FCC Rules. If the issue persists, consult the troubleshooting section of the user manual.
What’s in the box
Overview
Easy Set-Up
About main sperkerphone
- Power On/off
- Long press ON/OFF for 3s, the speakerphone will be turn on/off with hint of tone.
- Connect and disconnect
Wireless connection
- After power on, long press the wireless pairing button for about 2s to start pairing mode. You will hear “pairing” (white and blue flashing light).
- Turn on your device and choose to connect with the speakerphone. Wait for 3s until you hear hint tone.
- To cancel pairing: a short click on pairing button. (flashing light turn white).
- To disconnect: a long press on pairing button for about 2s, you will hear hint tone. (Blue light turns white).
Connect by USB cable
Connect with computer by USB cable.
Connect by Wireless Receiver
Connect the USB wireless receiver to your computer, and start pairing mode on
speakerphone. Wait for about 15 seconds until the pairing is completed, then
the speakerphone is connected and ready to go.
Charging
Main speakerphone: connect the speakerphone by USB to an AC adapter or USB charging port, it will start to charge.
Answer /end calls
- Press button to answer calls, press button to end calls.
Speaker volume up/down
- † Speaker volume up, — Speaker volume down
Mute
Press mute button & among any of the main speakerphone and extension
microphones, all microphones will be muted at the same time. Press again to
unmute. When microphone is working, light will be white. When muted, light
will be red.
Automatic shut off
When device is not connected for 15mins, it will shut off automatically.
Battery level
When charging or short press power key, the green light is the charging/power level indicator. During charging it will be green flash light, and full green light when charging is completed.
About Extension microphone
-
Power On/off
Long press mute button for 3s, it will be turned on/off. -
Connect and Disconnect
- Long press mute button on the extension mic for about 6s, the white light will flash quickly to enter the pairing mode. Then a short press on the call power key on the main speakerphone to start pairing.
- (Note: Usually the extension microphones should have been paired with main speakerphone already before delivery. In special cases, refer to this method to pair again if they were disconnected).
- When extension mic is disconnected with main speakerphone, it will be white flash light and shut down automatically after 18mins.
- When main speakerphone is shut down, the connected extension mics will be shut down at the same time.
-
Charging
Extension microphone: While the main speakerphone is charging, put the extension microphone magnetic charging connector near the speakerphone charging port. Extension microphone will be connected and start to charge.
(Note: When battery under low level, it will be red flash light. During charging it will be green flash light, and full green light when charging is completed.)
FCC Warnning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuan t to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference e to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different f rom that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>