TAOTRONICS Wireless Mono Heads User Guide
- June 7, 2024
- TaoTronics
Table of Contents
TAOTRONICS Wireless Mono Heads User Guide
Model: TT-BH041
TaoTronics Wireless Mono Headset
User Guide
Product Diagram
- Flexible Headband
- Volume +
- Volume
- LED Indicator
- Multifunction Button
- Micro-USB Charging Port
- Microphone
Package Contents
1 x TaoTronics Wireless Mono Headset (TT-BH041)
1 x Micro-USB Charging Cable
1 x User Guide
How to Use
1. Charging
- Connect the charging port with any USB charging adapter or active computer USB port.
- Charging will start automatically with the LED indicator turning red.
- The headset is fully charged when the LED indicator turns off.
2. Pairing
-
Make sure the headset and your Bluetooth® device are next to each other (within 3 feet / 1 meter).
-
When the headset is off, press and hold the Multifunction Button for 2 seconds to bring the headset into pairing mode with the LED indicator flashing blue and red alternately.
-
Activate Bluetooth® on your phone and search for nearby Bluetooth® connections.
-
Find “TaoTronics TT-BH041” in the search results. Tap on the name to connect. Once connected, the LED indicator will flash blue once every 5 seconds
Note :- Automatic Re-pairing: The Bluetooth® headset can remember devices paired previously. You may simply turn on the headset and the device (with Bluetooth activated), and they will connect to the last connected device automatically without going into the pairing mode.
3. Clear Pairing History
- If the headset fails to pair with your Bluetooth® device clear the pairing history by pressing and holding the Multifunction and Volume – Buttons simultaneously when the headset is on until the LED indicator flashes red and blue at the same time indicating clearing successfully. Then re-pair your Bluetooth® device as instructed in Pairing.
- If you want to pair the headset with another device when already paired, deactivate the Bluetooth® function on the paired device or remove “TaoTronics TT-BH041” from the Bluetooth list.
Button Control
A Noise-free Telephone Call Starts from THIS…
Taotronics BH041 powered by Elevoc Vocplus® AI noise reduction technology can
help you remove unwanted background noises from your high-value business
calls. By leveraging powerful Computational Auditory Scene Analysis (CASA) and
Deep Neutral Network (DNN), Elevoc Vocplus® could simulate the human auditory
system and precisely extract your voice from background noise, delivering the
first-ever clear voice quality and optimized speech intelligibility.
CUSTOMER SERVICE Delivering world-class support via clear, comfortable and
intelligible speech means everything in your business. Taotronics BH041
powered by Elevoc Vocplus® eliminates different types of background noise and
enables the other ones to hear you clearly and understand you at ease.
CALL CENTER
Customers don’t want to hear disturbing sounds such as phone ringing, keyboard
tapping, machinery, babble noise, air conditioner, etc.. Taotronics BH041
powered by Elevoc Vocplus® help you solve the noise interference problem and
make your customers hear nothing but your clear voice.
The Bluetooth®word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Sunvalleytek International Inc. is under license. Other trademarks and trade names are those of their respective owners.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
WEEE Compliance
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems) This marking on the
product, accessories or literature indicates that the product and its
electronic accessories should not be disposed of with other household waste at
the end of their working life. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, please separate these items
from other types of waste and recycle them responsibly to promote the
sustainable reuse of material resources. Household users should contact either
the retailer where they purchased this product, or their local government
office, for details of where and how they can take these items for
environmentally safe recycling. Business users should contact their supplier
and check the terms and conditions of the purchase contract. This product and
its electronic accessories should not be mixed with other commercial wastes
for disposal.
ASIA PACIFIC
E-mail : support.jp@taotronics.com (JP)
EUROPE
E-mail:
support.uk@taotronics.com (UK)
support.de@taotronics.com (DE)
support.fr@taotronics.com (FR)
support.es@taotronics.com (ES)
support.it@taotronics.com (IT)
NORTH AMERICA
E-mail:
support@taotronics.com (US)
support.ca@taotronics.com (CA)
Tel: 1-888-456-8468 (Monday-Friday:
9:00 17:00 PST)
MANUFACTURER
Shenzhen Nearby Express Technology Development Co., Ltd.
Address: Floor 7, Building E, Galaxy World Phase II, Shenzhen, China
Learn more about the EU Declaration of Conformity: https://www.taotronics.com/pages/user-manual
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>