Godox GMC-U3 Monitor Camera Control Cable Instruction Manual

Godox GMC-U3 Monitor Camera Control Cable Instruction Manual

Forward

Thank you for purchasing!
This monitor camera cable is a plug and play accessory cable for Godox 5.5″4K HDMI Touchscreen On-Camera Monitor GM55. With this cable, the GM55 monitor can realize the function of camera control. Read this manual carefully before using to make sure the correct operation and exert the optimum function.

Product Features

1. TPE fixed wire connector, ensures it has long using life span;
2. Adopt sandblasting process, guarantee it anti-rust and corrosion resistance;
3. Protected completely, Scratch-proof and antioxidant;
4. Consummate craft, long-lasting;
5. Rigorous testing and security.

Product Mode and Compatibility

Model

| Camera interface| Cable Length| Compatibility
---|---|---|---
GMC-S1| Multi| 60CM|

Sony A7III; RX10;A7R; A9…

GMC-U1

| Micro USB| 60CM| EOS90D; EOS850D; EOS 7D Mark II;
GMC-U2| Mini USB| 60CM|

Canon 6D Mark-II; Canon1500D; EOS60D; 3000D…

GMC-U3

| USB Type-C| 60CM|

Canon M2 Mark II; EOS-M6 Mark II; Panasonic S1R…

Note: The compatibility list will continue to be updated. If
necessary, please login www.godox.com for the latest compatibility list.

Warning

• Don’t disassemble!
• Always keep this product dry!
• Do not leave the product in the presence of flammable gas.In certain circumstance,please pay attention to the relevant warning.
• Please carefully read and observe the warning or direction offered by the manufacture.

Product Interface

What’s in the box

• Camera Control Cable x1

• Cable Tie x1

• Instruction Manual x1

Operating instructions

Example:Use with the GM55.

Before installation

Please select suitable cable according to the camera model.

Note:
Camera Control Cable Connection with Monitor:
Insert the interface to monitor in the direction of arrow 1
Then slide the interface to lock it in the direction of arrow 2

• Remove the rubber plug of the camera control port and turn to another side;
• Connect the camera control cable and the HDMI cable to the camera and monitor respectively;
• Insert the camera control cable into the camera control port of the GM55 and push to DC port direction to lock it;Then connect the other end of the camera control cable with the camera.If the cable is too long, please fix it with tie.

Operation and usage

Connect the camera and GM55 monitor with this camera control cable followed the instruction above.

• Turn on the camera and the GM55.
• Slide leftwards from the screen edge on the right to pop-up the camera control menu of GM55. Single-click the hidden menu in the video area can also pop up or hide the menu as required.
• When camera control and camera mapping is switched on, the touch camera control menu will not be displayed. Then, the buttons F2-F6 on the top of GM55 are shortcut buttons of camera control. Details camera control buttons description refers to the postscript of this instruction manual.

Take out the camera control cable

Push the Self-lock Switch on the back of the monitor to the other side, then push the control cable interface to the edge to take it out.

Disconnection Instruction:
Push the Self-lock switch in the direction of arrow 1
Slide the camera control cable interface in the in the direction of arrow 2 and then gently take it out.

Postscript: GM55 Camera Control Buttons
Description
Note: Such as monitor upgrade, button function changes, or more detailed instructions,please refer to the GM55 real-time instrction manual for reference.

Warranty

Dear customers, as this warranty card is an important certificate to apply for our maintenance service, please fill in the following form in coordination with the seller and safe-keep it. Thank you!

Address
Seller Information| Name
Contact Number
Address
Date of Sale|
Note

Note: This form shall be sealed by the seller.

Applicable Products

The document applies to the products listed on the Product Maintenance lnformation (see below for further information). Other products or accessories (e.g. promotional items,giveaways and additional accessories attached,etc.) are not-included in this warranty scope.

Warranty Period

The warranty period of products and accessories is implemented according to the relevant Product Maintenance lnformation.
The warranty period is calculated from the day(purchase date) when the product is bought for the first time,and the purchase date is considered as the date registered onthe warranty card when buying the product.

How to Get the Maintenance Service

If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide valid warranty card. If you cannot provide valid warranty card, we may offer you maintenance service once confirmed that the product or accessory is involved in the maintenance scope, but that shall not be considered as our obligation.

Inapplicable Cases

The guarantee and service offered by this document are not applicable in the following cases: ①. The product or accessory has expired its warranty period; ②. Breakage or damage caused by inappropriate usage, maintenance or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by external force, contacting or exposing to the improper temperature, solvent, acid, base, flooding and damp environments, etc; ③. Breakage or damage caused by non- authorized institution or staff in the process of installation, maintenance, alternation, addition and detachment; ④. The origina identifying information of product or accessory is modified, alternated, or removed; ⑤. No valid warranty card; ⑥. Breakage or damage caused by using illegally authorized, nonstandard or non-public released software; ⑦. Breakage or damage caused by force majeure or accident; ⑧. Breakage or damage that could not be attributed to the product itself.
Once met these situations above, you should seek solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories and software that beyond the warranty period or scope is not included in our maintenance scope. The normal discoloration, abrasion and consumption are not the breakage within the maintenance scope.

Maintenance and Service Support Information

The warranty period and service types of products are implemented according to the following Product Maintenance Information:

Product Type| Name| Maintenance Period(month)| Warranty Service Type
---|---|---|---
Parts| Product Main Body| 12| Customer sends the product
to designated site
Battery| 3| Customer sends the product
to designated site
Charger, Power Cable,Sync Cable, Electrical Parts etc.| 12| Customer sends the product
to designated site
Other Items| Battery Case, Windscreen Foam , Wind Cap, Locking Device, Lanyard, Tie, Velcro Tape, Clip, Bag, Package etc.| No| Without warranty

Godox After-sale Service Call 0755-29609320-8062

GODOX Photo Equipment Co., Ltd.
Add: Building 2, Yaochuan Industrial Zone,Tangwei Community, Fuhai Street,
Bao’an District, Shenzhen 518103, China
Tel: +86-755-29609320(8062) Fax: +86-755-25723423
E-mail: godox@godox.com
godox.com
Made In China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>