PYLE Waterproof Rated Off-Road Speakers User Manual

PYLE Waterproof Rated Off-Road Speakers User Manual

PLUTV46BTA Installation

Speaker Mounting suggestion as below:

_ **STEP 1

**_

_ STEP 2

STEP 3
_

STEP 4

Auto Reconnection:

Step 1: Unbolting the mounting bracket.

Step 2: Slide in the buckle with rubber pad attached to the bracket stand of the speaker. Attach the set to the handle bar of vehicle/ship.

Step 3/4: Attach screw to lock the buckle.

Step 5: Use Butt Connector accessories to Connect Speaker wires

BT Pairing and Connection

Power:
Press and hold the power button to power ON/OFF.

Wireless BT Streaming Connection:
a. Ensure BT ability is activated, then search for the PLUTV46BTA from your BT-enabled device. The light will turn blue and blinks while waiting for BT connection.
b. The PLUTV46BTA BT Network Name will appear as “PyleUSA” (No password is required for connecting).
c. When the BT is connected, the light will turn blue and stops blinking.

AUX-IN:
a. Double click power button to switch BT mode to Aux-in mode.

Auto Reconnection:

a. When the device is out of the BT range, BT will be disconnected automatically, the light turns blue while blinking.
b. BT will automatically reconnect when detected in range again in 10 minutes.
c. Disconnected BT after 10 minutes, you need to process BT connection steps (above) to reconnect BT again.
d. If the other device occupied the BT during this period (10mins), you need to process BT connection steps (above).
e. If there is no connection during this period (10mins), it will turn to standby mode.

Playing Music

1. Press and hold 3 seconds for Power ON or OFF
2. hort press   to play music or pause
3. Double click power button to switch BT mode to Aux-in mode
4. Short press for next track
5. Short press for previous track
6. Press and hold VOL+ for volume up
7. Press and hold VOL- for volume down

Installation (Seamless Flush Mount)

Wire Diagram

Wire Color                          Description

Red                                                Battery (+), 12dc
Black                                              Battery (-), Ground
White                                             Output L (+)
White/Black                                  Output L (-)
Gray                                              Output R (+)
Gray/Black                                    Output R (-)

System Features:

• Waterproof Rated Speakers + Wireless BT Controller System Kit
• Universal Mount System for Convenient Audio Control
• Wireless BT Music Streaming Ability
• Waterproof-Rated Marine Grade Construction
• Water-Resistant, Weatherproof Design
• Compact & High-Powered System Output
• Used For Cars, Trucks, ATV’s, UTV’s, 4×4’s, Boats, Marine Watercrafts, & PowerSport Vehicles

What’s in the Box:

• (2) 4”-inch Marine Speakers
• Amplified Wireless BT Streaming Control Unit
• (2) 2 Meters Speaker Wire
• Audio Connection Cable, 3.5mm
• (2) 5.91” x 0.75” x 0.24” -inches Rubber Pads
• (2) 6.5” x 0.75” x 0.08” -inches Rubber Pads
• (4) Butt Connector (Red Color For A.W.G 16-22)

Wireless BT Control Unit:

• Built-in Wireless BT Audio Receiver
• 2-Channel Amplifier Style
• Works with All of Today’s Latest Devices
• Smartphones, Tablets, Laptops, Computers, etc.
• Connect & Stream Audio from Additional External Devices
• Aux (3.5mm) Input
• Full Range Stereo Sound Reproduction
• Integrated Power Wiring Harness
• Pre-Amp RCA Out to Any OEM/Factory-Made Mono-Block/ Full-Range Amplifier
• Flush Mount Mounting Kits Included
• Universal Vehicle Mounting
• Can be In-Console Flush Mounted
• Anti-Thump Turn-on
• Soft Turn On/Off Option
• Overload & Power Protection Circuitry

Wireless BT Control Unit Technical Specs:

• Power Output: 800 Watt MAX
• 2×200 Watts RMS @ 4 Ohm
• 2×400 Watts MAX @ 4 Ohm
• Wireless BT Version: 5.0
• Wireless BT Network Name: ‘PYLEUSA’
• Wireless Range: 30’+ ft.
• Amplifier Type: Class D
• Marine Grade IP65 Rating
• T.H.D: 0.1%
• S/N Ratio: > 95 dB
• Channel Separation: > 65 dB
• Frequency Response: 10 – 40 kHz
• Fuse: 10A
• Power: DC 12V
• Unit Dimensions (Diameter x Depth): 3.8” x 4.17” – inches

Marine Speakers:

• Pro Audio PowerSport Speakers
• Sound System: (2) x 4”Woofers + (2) x 0.5” Tweeters
• 2-Way Full Range Stereo Sound Reproduction
• Quick-Connect Spring-Loaded Speaker Terminals
• Impressive Bass Response
• Sleek Design, Machine Molded Speaker Cabinet Housing
• Rugged, Universal Mount Bracket Design for Roll-Bar/Roll-Cage

Marine Technical Specs:

• Power Output: 800 Watt MAX
• Marine Grade Waterproof Rating: IP-X5
• Speaker Style: Passive Speakers
• Speaker Type: Polypropylene Cone, Butyl Rubber Surround (x2)
• Tweeter Type: Neodymium Dome (x2)
• Frequency Response: 85Hz-20kHz
• Impedance: 4 Ohm
• Magnet Type: 20 oz. Circuit
• Mid-Woofer Voice Coil Type: 1.0″, Aluminum
• Sensitivity: 90 dB +/- 2 dB @ 1M/1W
• Universal Mounting Brackets Roll-Bar/Roll-Cage Diameter: 1.25” ~ 2.0” -inches
• Power Supply: DC 12V
• Speaker Size (Front Diameter x Length): 5.6” x 7.3” -inches (Each)

Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>