Megger Insulation Tester User Guide
- June 7, 2024
- Megger
Table of Contents
Megger Insulation Tester
MEASURING VOLTAGE using 2 test leads
If the display doesn’t show that the T-R terminals are active, press the T-G·R button to change the mode.
TEST THE PAIR FOR ALTERNATING CURRENT AND DIRECT CURRENT VOLTAGE
For all 3 setup configurations:
VAC < 10 = Proceed to the next test
VAC ≤ 10 = Fault must be cleared
VDC < 3 = Proceed to the next test
VDC ≥ 3 = Fault must be cleared
TIP to RING
RING to GROUND
TIP to GROUND
MEASURING VOLTAGE using 3 test leads
MEASURING CONTINUITY
MEASURING INSULATION RESISTANCE
Test Equipment Depot – 800.517.8431 – 5 Commonwealth Ave, MA 01801
TestEquipmentDepot.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>