Angler LED Light Tent Dimmer II Instructions
- June 7, 2024
- angler
Table of Contents
Angler LED Light Tent Dimmer II
Thank you for choosing Angler.
The Angler LED Port-a-Cube is a foldable and portable lighting solution for product photography. It features a bright, built-in LED array, so there’s no extra assembly. The LEDs are adjusted for 5400 K color temperature and deliver clean, even, and shadow less lighting that’s flicker free, ensuring consistent exposure for every shot. The Port-a-Cube offers 100% to 10% dimming, and a step less dimmer allows you to precisely dial in the desired brightness level.
Two photo windows offer frontal and top-down perspectives for items such as jewelry, mobile electronics, or any small item for auction and web retail. A standard diffuser softens the light when shooting from the front, and a diffuser with an elastic opening for a lens softens the light when shooting from above. High key, low key, flat gray, and green screen panels offer four different background options.
Precautions
-
Please read all instructions carefully before assembling and
operating this product. -
Use this light with only the rated voltage on the power supply, as
any misuse could risk damage or malfunction. -
Avoid using this light in any high-moisture environments, as this
could also cause damage or malfunction. -
To prolong the life of the unit, tum the power off and unplug the
light when it is not in use. -
Do not attempt to disassemble or repair this product. There are
components inside that can produce a hazardous electric shock. -
Keep this product away from water and any flammable gases or
liquids. -
Do not leave the device in a closed vehicle under the sun or in
other areas subject to very high temperatures. -
Make sure this product is powered off when plugging it into a
power source. -
Handle this product with care.
-
C lean this product with only a soft, dry cloth.
-
Keep this product away from children.
-
Make sure that this product is intact and that there are no missing
parts. -
All images are for illustrative purposes only.
Assembling the LED Port- a-Cube
-
Fold up panels A, B, and C. Make sure the touch-fastener strips are fully connected.
-
(Optional) Insert the b lank end of the background into the background pocket on panel D, and match t he touch-fastener pads with the touch-fastener strips on panel F.
-
Lift panels D and E to complete the enclosure. Make sure the touch-fastener strips are fully connected.
-
Rotate the Port-a-Cube so side Bis on top.
-
(Optional) Two diffusers are included. The diffuser for shooting through the top panel has a hole in the middle for your camera. The diffuser for shooting through the front panel is a plain diffuser with no hole.
To attach the diffuser, pull the top open, and connect the appropriate diffuser to the touch-fastener strips on tops of panels A and C so the diffuser covers the LED strip when assembled.
Note: The diffusers are designed to hang loosely to prevent direct contact with the LED bulbs. -
Plug the LED Port-a-Cube into an AC power source, and adjust the desired brightness level with the dimmer.
Packing the LED Port-a-Cube
-
Unplug the power adapter from the power outlet and the LED strip’s power cable.
-
Disassemble the LED Port-aCube so each panel is lying flat, and insert the backgrounds into the background pocket.
-
Fold panel B onto panel F. Make sure the LED power cable is not sticking out.
-
Fold in panels A, C, and E.
-
Fold the Port-a-Cube together.
-
Fold the flap over matching the touch fastener strips. You can store the power adapter, cables, and diffuser in the outer mesh pocket.
Specifications
CT-XSLEDII (Mini)
LED count
| 64
---|---
Color temperature|
5400 K
Input power
|
100-240 V, 50/60 Hz, 1.0 A
Output (DC)
|
12 V / 2 A
Dimmer range
|
10% to 100%
Dimensions
|
16.25″ × 11.5″ × 11.25″ (41.3 × 29.2 × 28.5 cm)
Weight|
2.8 lb. (1.3 kg)
CT-DSLEDII (17 in.)
LED count
|
120
---|---
Color temperature
|
5400 K
Power consumption
|
50 W
Input power
|
85–265 V, 50/60 Hz
Output (voltages vary depending on the input)
|
25–40 V @ 1500mA
30–55 V @ 900mA
28–45 V @ 1200mA
Dimmer range
|
10% to 100%
Dimensions
|
17″ × 17″ × 17″
(43 × 43 × 43 cm)
Weight
|
2.65 lb. (1.2 kg)
CT-DLLEDII (27 in.)
LED count
|
150
---|---
Color temperature
|
5400 K
Power consumption
|
65 W
Input power
|
85–265 V, 50/60 Hz
Input power
|
+42 V / 1.5 A max.
Dimmer range
|
10% to 100%
Dimensions
|
27″ × 27″ × 27″ (69 × 69 × 69 cm)
Weight
|
6.5 lb. (2.9 kg)
One-Year Limited Warranty
This Angler product is warranted to the original purchaser to be free from
defects in materials and workmanship under normal consumer use for a period of
one (1) year from the original purchase date or thirty (30) days after
replacement, whichever occurs later.
The warranty provider’s responsibility with respect to this limited warranty
shall be limited solely to repair or replacement, at the provider’s
discretion, of any product that fails during normal use of this product in its
intended manner and in its intended environment. Inoperability of the product
or part(s) shall be determined by the warranty provider. If the product has
been discontinued, the warranty provider reserves the right to replace it with
a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect,
accident, alteration, abuse, improper installation or maintenance. EXCEPT AS
PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES
NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides
you with specific legal rights, and you may also have additional rights that
vary from state to state.
To obtain warranty coverage, contact the Angler Customer Service Department to
obtain a return merchandise authorization (“RMA”) number, and return the
defective product to Angler along with the RMA number and proof of purchase.
Shipment of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.anglerlights.com or call
Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group.
Angler is a registered trademark of the Gradus Group.
© 2021 Gradus Group LLC. All Rights Reserved.