goodRam IRDM PRO M.2 Instruction Manual

October 30, 2023
goodram

goodRam IRDM PRO M.2 Instruction Manual
goodRam IRDM PRO M.2

SANE THE QR CODE
QR Code

Assembly Instruction

Take the kit out of the box and prepare it for assembly. Locate the M.2 socket on the motherboard and unscrew the mounting screw or prepare it from the kit that came ‘with the motherboard.
Assembly Instruction

Peel off the protective foil from the mounting tape located on the heatsink base, then slide the SSD into the guides all the way as shown in the picture. Pay attention to the correct orientation of the disk.
Assembly Instruction

Peel off the protective foil from the mounting tape located on the heatsink. Position the heatsink to fit over the base.
Assembly Instruction

Tighten all 6 screws to join the kit parts. Assembly
Instruction

Insert the disk into the M.2 slot according to the assembly instructions attached to the motherboard. Mount it at a slight angle so that the connector fits in without using the force.
Assembly Instruction

Gently press down the disk to the motherboard to be tighten down, and then fix it with the previously prepared mounting screw.
Assembly Instruction

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals