BURNDY EPAC10 Electric Hydraulic Pump Owner’s Manual
- July 2, 2024
- BURNDY
Table of Contents
BURNDY EPAC10 Electric Hydraulic Pump
Specifications
- Product: Electric Hydraulic Pump with Air Bulb Control and Roll Cage
- Pressure: 10,000 psi
- Brand: Burndy
- Catalog Number: EPAC10
- Power Source: 1/2 HP @ 3450 RPM, 115V-AC; 60 Hz Motor Pump
- Reservoir Capacity: 8 quarts
- Dimensions: 18.50 in x 11.75 in x 17.5 in (H x W x L)
- Weight: 68 lbs
- Current Draw Max: 10 Amperes
Product Usage Instructions
Features Overview
- Roll cage for protection
- 3-position switch and control box for easy operation
- Air Bulb Actuator for smooth control
- Full automatic or manual operation modes
- Jog and Hold cycles for precise pumping
- Oil level window for monitoring
Application This electric hydraulic pump is designed for pumping applications, specifically for use with 10,000 psi Remote Hydraulic Crimpers and Cutters.
Usage Steps
- Ensure the pump is securely placed on a stable surface.
- Connect the power source to the pump according to the electrical ratings provided.
- Fill the reservoir with hydraulic fluid up to the indicated level using the oil level window.
- Select the desired operation mode (automatic or manual) using the control box.
- Use the Air Bulb Actuator to control the pumping action smoothly.
- If manual mode is selected, use the Jog and Hold cycles for precise pumping as needed.
FAQ
Q: Can this pump be used with other hydraulic tools?
A: This pump is specifically designed to work with 10,000 psi Remote Hydraulic Crimpers and Cutters.
Q: What should I do if the pump malfunctions?
A: In case of malfunction, refer to the user manual for troubleshooting steps. If the issue persists, contact customer support for assistance.
Q: Is it necessary to monitor the oil level regularly?
A: Yes, it is recommended to check the oil level using the oil level window regularly to ensure smooth operation of the pump.
- Electric Hydraulic Pump, Air Bulb Control with Roll Cage, 10,000 psi
- By Burndy Catalog # EPAC10
- Pump, 10K psi, Air Bulb Control with Roll Cage.
Features
- Roll cage
- 3-position switch and control box
- Air Bulb Actuator
- Full automatic or manual “Jog and Hold” cycles
- Oil level window
- 8-quart reservoir
Application
- Pumping
General
- Application – For Use On Use with 10,000 psi Remote Hydraulic Crimpers and Cutters
- Catalog Number EPAC10
- Power Source 1/2 HP @ 3450 RPM, 115V-AC; 60 Hz Motor
- Tool Type Pump, Electric Hydraulic
- Type Pump
- UPC 781810033371
- UPC 12 Digit 7818100333711
Dimensions
- Dimensions 18.50 in x 11.75 in x 17.5 in
- Height 17.5 in
- Length 18.5 in
- Weight 68 lb
- Width 11.75 in
Electrical Ratings
- Current Draw Max 10 Amperes
Certifications And Compliance
- Standards – RoHS Compliance Status CM
Logistics
- Minimum Pack Quantity 1
- Package Contents Pump only
Product Assets
- Catalogs – Full Line BURNDY Catalog Catalogs – Section N – Tooling Customer Notices – Prop 65 Notice Product Cross Section Image(s) – BUR_EPAC10_LineArt Sales Drawings – SE..207892-01 SDS – ALFLUID SDS
- A proud member of the Hubbell Family.
- ©2024 Hubbell Incorporated. All rights reserved.
- BRDY-EPAC10-SPEC-EN REV 6/2024
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>