AiOS Amplifier Cary Audio Stereo Wise User Guide

: June 17, 2024
: CARY AUDIO

Table of Contents

AiOS Amplifier Cary Audio Stereo Wise
Product Information
Product Usage Instructions
QUICK START GUIDE FOR AiOS
WI-FI SETUP
WIRED SETUP (ETHERNET)
Documents / Resources

AiOS Amplifier Cary Audio Stereo Wise

AiOS-Amplifier-Cary-Audio-Stereo-Wise-product-image

Product Information

Specifications:

Connection Options: Wi-Fi, Ethernet
Input: USB/SD Card
Control: IR Remote Control
App: Cary Audio Streamer 2.0

Product Usage Instructions

Wi-Fi Setup:

Place AIOS in its location and connect your speakers.
Screw the two Wi-Fi & Bluetooth antennas into AIOS.
Connect the AC power cord and plug it into the AC outlet.
Wait 30 seconds and turn on AIOS (Must hold down POWER button on AiOS or use IR remote). Allow it to fully boot up.
Select YES to scan for Wi-Fi networks.
Choose your network from the list of available Wi-Fi networks and enter the Wi-Fi password using the alphanumeric keys on the handheld IR remote control.
AiOS will connect to the Wi-Fi network and set the default input to USB/SD Card.
Use the IR remote control to select your desired input for streaming music or open the Cary Audio Streamer 2.0 app on your phone for online streaming services.

Wired Setup (Ethernet):

Place AIOS in its location and connect your speakers.
Connect an Ethernet cable to the back of AIOS and plug it in.
Follow the same steps as in Wi-Fi Setup from step 4 onwards.

FAQ

Q: How can I ensure full enjoyment of my AIOS product?
A: It is highly recommended to download the full manual at www.caryaudio.com to fully understand all settings and operational procedures. Additionally, after a firmware update, perform a system Reset and then disconnect the power cord for two minutes to ensure cache and system memory reset.

QUICK START GUIDE FOR AiOS

Choose either Wi-Fi or Ethernet to connect the AIOS to your home network, but DO NOT connect both. Delete all previous Cary streaming apps from your phone/tablet. Download the Cary Audio Streamer 2.0 app, but do not open it. Additionally, the app must be completely closed out and not running in the background.
IF YOU ARE CONNECTING AIOS WITH WI-FI, DO NOT CONNECT AN ETHERNET CABLE.

WI-FI SETUP

Place AIOS in its location and connect your speakers.
Screw the two Wi-Fi & Bluetooth antennas into AIOS.
Connect the AC power cord and plug it into the AC outlet.
Wait 30 seconds and turn on AIOS (Must hold down POWER button on AiOS or use IR remote). Allow it to fully boot up.
Select YES to scan for Wi-Fi networks.
After a few moments, a list of available Wi-Fi networks will appear on screen. Use the UP/DN arrow keys on the hand-held IR remote control and select your network and press Enter.
Enter your Wi-Fi password using the alphanumeric keys on the hand- held IR remote control and press Enter when done.
AiOS will connect to Wi-Fi network and enter the USB/SD Card input as this is the default input upon start up. When no USB HDD or SD Card is inserted, it will display “No USB/SD”. Default startup input can be changed in the settings.
You can now use the IR remote control to select your desired input to start streaming music, or you can open the Cary Audio Streamer 2.0 app on your phone. This will be required when listening to online streaming services as login must be done using the Cary Streamer 2.0 app.

NOTE: AiOS display keys will turn off automatically after a few seconds. Moving your hand closer to the face of AiOS will automatically turn the display keys back on. This can be set to stay on or turn off at Various intervals.

WIRED SETUP (ETHERNET)

IF YOU ARE CONNECTING AIOS WITH WIRED ETHERNET, DO NOT CONNECT THE TWO WI-FI ANTENNAS.

Place AIOS in its location and connect your speakers.
Connect an Ethernet cable to the back of AIOS and plug the other end into your router (or Network/Ethernet Switch). If you plan to use Bluetooth, connect the Bluetooth Antenna as well.
Connect the AC power cord and plug it into the AC outlet.
Wait 30 seconds and turn on AIOS (Must hold down POWER button on AiOS or use IR remote). Allow it to fully boot up.
AiOS will enter the USB/SD Card input as this is the default input upon start up. When no USB HDD or SD Card is inserted, it will display “No USB/SD”. Default startup input can be changed in the settings.6. You can now use the IR remote control to select your desired input to start streaming music, or you can open the Cary Audio Streamer 2.0 app on your phone. This will be required when listening to online streaming services as login must be done using the Cary Streamer 2.0 app.

NOTE: AiOS display keys will turn off automatically after a few seconds. Moving your hand closer to the face of AiOS will automatically turn the display keys back on. This can be set to stay on or turn off at Various intervals.

To get the most out of your AIOS it is HIGHLY recommended to download the full manual at www.caryaudio.com . to fully understand all the settings and operational procedures to ensure full enjoyment of your AIOS product.
Finally, anytime you do a firmware update, it is recommended you also do a system Reset afterward. Then, once the Reset is done, pull the power cord for two minutes. This is to ensure the cache and system memory fully reset.

Enjoy, The Cary Audio Team

Documents / Resources

| CARY AUDIO AiOS Amplifier Cary Audio Stereo Wise [pdf] User Guide
AiOS Amplifier Cary Audio Stereo Wise, AiOS, Amplifier Cary Audio Stereo Wise, Cary Audio Stereo Wise, Audio Stereo Wise, Stereo Wise
---|---