angler BI-90W-RL 18 in Bi-color LED Ring Light Instructions
- June 7, 2024
- angler
Table of Contents
- Thank you for choosing Angler
- Precautions
- Overview
- Flex Arm Phone Holder
- Remote Control
- Mounting the BI-90W-RL
- Powering On the Light
- Adjusting the Color Temperature and Brightness
- Adding Accessories to the Light
- Remote Operation
- Recycling Lithium-Ion Batteries
- Specifications
- One-Year Limited Warranty
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
angler BI-90W-RL 18 in Bi-color LED Ring Light
Thank you for choosing Angler
The Angler BI-90W-RL is an ultra-bright 18-inch ring light that’s ideal for
lighting vlogs, interviews, influencer videos and broadcasting from home.
Its 480 bi-color SMD LEDs are housed in a dome-shaped diffuser that softens
and spreads the beam to 120° for a flattering, soft, single-shadow light
that’s near-broadcast quality in brightness and color accuracy.
This ring light runs on battery or AC power so it’s as effective in the field as it is in the office or at home. Variable color temperature adjustment from 3200 to 5600 K lets you light subjects with the warmth of a tungsten bulb, bright daylight, and everything in between. Create realistic lighting or match the ambient light of your environment.
A flex arm with a spring-loaded smartphone clamp can put a smartphone at the center of the ring light. For ultimate functionality, multiple coldshoe and 1/4-20 accessory mounts provide points to attach items like an accessory arm, small photo or video accessories, a makeup mirror, or a camera with an optional mini ballhead.
Precautions
- Please read and follow these instructions, and keep this manual in a safe place.
- Keep this unit away from water and any flammable gases or liquids.
- Do not leave the device in a closed vehicle under the sun or in other areas subject to very high temperatures.
- Do not attempt to disassemble or repair the equipment. There are high-voltage components inside the unit. Failure to observe this precaution could result in electric shock or product malfunction. This will void the warranty, and Angler will not be responsible for any damage.
- Use only the correct, recommended voltage.
- Make sure the unit is powered off when plugging it into a power source.
- Disconnect the power cord when not in use.
- Do not stare directly at the lights when they are powered on.
- Use only parts provided by the manufacturer.
- Handle this product with care.
- Clean this product with only a soft, dry cloth.
- Keep this unit away from children.
- Make sure the item is intact and that there are no missing parts.
- All images are for illustrative purposes only.
Overview
- Cold-shoe mounts
- NP-F battery compartments
- Display
- Dimmer knob
- Power switch
- IR sensor
- Color temperature dial
- Power socket
- USB charging port
Flex Arm Phone Holder
Remote Control
Also included:
- AC adapter
- Power cord
- Carry bag
Mounting the BI-90W-RL
-
Loosen the locking knob, and place the receiver over the light stand’s 5/8-inch pin.
-
Make sure the receiver fits completely over the pin before you tighten the locking knob. If it doesn’t, continue to loosen the locking knob until the fixture drops down around the pin.
-
Tighten the locking knob until the ring light is secure.
Powering On the Light
AC Power
When operating on AC power, remove the batteries.
- Plug the power adapter into the light, and plug the power cord into an available outlet.
- Move the power switch to ON.
Battery Power
7.4 V NP-F type batteries are recommended for the BI-90W-RL ring light. Two batteries must be installed to operate the light on battery power.
When operating on battery power, unplug the power adapter from the AC outlet and from the light.
-
Place an NP-F battery into each of the battery plates, and slide them toward the contacts until they lock in place.
-
Move the power switch to ON.
The battery display in the control panel will show the remaining battery
charge.
Tip: For uninterrupted operation, pack a few extra batteries in your gear
bag.
Adjusting the Color Temperature and Brightness
Color Temperature
Turn the color temperature knob to adjust the color temperature from 3200 to
5600 K in 100 K increments.
Brightness
Turn the dimmer knob to adjust the output level from 0% to 100% in 1%
increments.
Adding Accessories to the Light
Use the two 1/4-20 threaded sockets and the cold-shoe mounts to add
accessories such as accessory arms, small photo and video accessories, makeup
mirror (not included), or add an optional mini ballhead to mount a point-and-
shoot or DSLR camera.
Remote Operation
Warm: 3200 K Neutral: 4400 K Cool: 5600 K
The included remote uses an infrared beam to operate the ring light.
For remote operation, line of sight is required, and the maximum range is
approximately 50 feet.
Power Button
Press the power button to turn on the ring light. The light will power up with the most recent color temperature and brightness settings.
Press again to power off the light.
Daylight Button
Pressing the daylight button sets the light to 5600 K daylight-balance color temperature at 100% brightness.
Auto Buttons
Use the Auto Buttons to automatically set the light to a warm, neutral, or cool color temperature at either 100% or 50% brightness. Press again to power off the light.
Brightness Up/Down
The brightness control lets you adjust the light’s brightness from 0% to 100% in 1% increments.
Color Temperature Control
The color temperature control adjusts the color temperature from 3200 to 5600 K in 100 K increments.
Save Button
Press and hold the save button for one second to save the current brightness and color temperature. The light will recall these settings the next time it’s powered up. You can also press the save button at any time to recall the settings.
Recycling Lithium-Ion Batteries
Lithium-ion batteries are recyclable. You can help preserve the environment by returning your used rechargeable batteries to a collection and recycling location near you.
For more information about recycling rechargeable batteries, call the Call2Recycle helpline at 1-877-723-1297, or visit www.call2recycle.org.
Specifications
LIGHT FIXTURE
LED Chip Type| SMD
Beam Angle| 120°
Color Temperature| 3200 to 5600 K
Color Accuracy Standard| CRI: 97.5 (3200 K) / 96.9 (4400 K) / 97.75 (5600 K)
TLCI: 98 (3200 K) / 98 (4400 K) / 98 (5600 K)
Cooling System| Passive
Dimming| Yes, 0% to 100%
Display| LED
Housing Material| ABS plastic
Light Intensity @3 ft.| 3200 K: 1350 lx
4400 K: 1490 lx
5600 K: 1230 lx
Number of LEDs| 480
Expected Lamp Life| 50,000 HR.
Diameter| 18 in. (45.7 cm)
Dimensions (H × D)| 21.4 × 2.4 in. (54.3 × 6.1 cm)
Weight| 5.6 lb. (2.54 kg)
MOUNTING
Fixture Mount| 5/8 in.
Tilt| +/– 90°
CONNECTORS
Battery Plate| NP-F (×2)
Power INPUT CONNECTOR| BARREL
Power Output Connector| USB Standard-A
REMOTE OPERATION
Remote Control Type| Proprietary
Frequency| IR
POWER
AC Input Power| 100 to 240 V AC, 50/60 Hz
Power Source| AC adapter, NP-F battery (×2)
Max Power Consumption|
90 W
USB Output Power| 5 V, 2 A
SMARTPHONE BRACKET
Maximum Width| 3.25 in. (8.2 cm)
One-Year Limited Warranty
This Angler product is warranted to the original purchaser to be free from
defects in materials and workmanship under normal consumer use for a period of
one (1) year from the original purchase date or thirty (30) days after
replacement, whichever occurs later.
The warranty provider’s responsibility with respect to this limited warranty
shall be limited solely to repair or replacement, at the provider’s
discretion, of any product that fails during normal use of this product in its
intended manner and in its intended environment.
Inoperability of the product or part(s) shall be determined by the warranty
provider. If the product has been discontinued, the warranty provider reserves
the right to replace it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect,
accident, alteration, abuse, improper installation or maintenance. EXCEPT AS
PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES
NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides
you with specific legal rights, and you may also have additional rights that
vary from state to state.
To obtain warranty coverage, contact the Angler Customer Service Department to
obtain a return merchandise authorization (“RMA”) number, and return the
defective product to Angler along with the RMA number and proof of purchase.
Shipment of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.anglerlights.com or call Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
Angler is a registered trademark of the Gradus Group.
© 2021 Gradus Group LLC. All Rights Reserved.
References
- Angler | Lighting Equipment & Accessories
- Call2Recycle | Leading the Charge For Battery Recycling
- Gradus | Gradus Group
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>