angler LCSB-88 Collapsing Softbox For 8×8″ LED Light Panels Instructions

angler LCSB-88 Collapsing Softbox For 8×8″ LED Light Panels

Product Information

The Collapsible LED Softbox is a lighting accessory designed to enhance the performance of your LED light. It is available in three sizes: LCSB-88, LCSB-1206, and LCSB-1212. The softbox is made of high-quality materials, including a diffuser made of polyester, side and rear panels made of polyester, and inner panels made of silver-coated polyester. It is lightweight and portable, weighing approximately 12.8 oz. (363 g) for LCSB-88, 12.9 oz. (366 g) for LCSB-1206, and 13.3 oz. (377 g) for LCSB-1212. The softbox comes with a one-year limited warranty provided by ANGLER, a Gradus Group Brand.

Product Usage Instructions

1. Before mounting your LED onto a light stand, follow these steps to assemble the softbox:
2. Unfold the softbox and extend the side support rods. Lock them in place.
3. Rest the LED light on the back opening of the softbox. Do not place the LED inside the softbox.
4. Close the side flaps around the LED, followed by closing the top and bottom flaps. Secure them with the touch-connect tabs.
5. Stretch the elastic straps across the back of the LED and attach them to the touch-connect strips on the opposite side.
6. To disassemble and store the softbox:
7. Lay the softbox flat and grip both sides.
8. Twist the sides in opposite directions to form a figure eight while tucking the corners into the center of the softbox.
9. The softbox will collapse into a small, round shape that can be stored in the provided carry pouch.
10. For a more focused beam spread and better light control, you can attach the Angler LED Collapsible Softbox Grid (LCSB-GRID) to the recessed touch-connect strips on the front of the softbox. The accessory grid is available separately.

For more detailed information and instructions, please refer to the user manual available at https://manual-hub.com/.

Assembling the Softbox

Attach the softbox before you mount your LED onto a light stand.

1. Unfold the softbox, and extend and lock the side support rods.
2. Rest the LED light on the back opening. Do not place the LED inside the softbox.
3. Close the side flaps around the LED. Then close the top and bottom flaps, and secure them with the touch-connect tabs.
4. Stretch the elastic straps across the back of the LED, and attach them to the touch-connect strips on the opposite side.

Disassembling and Storing the Softbox

1. With the softbox lying flat, grip both sides and twist them in opposite directions to form a figure eight.
2. Continue to twist while tucking the corners into the center of the softbox. The softbox will collapse into a small, round shape that fits into the carry pouch.

Recommended Accessory

Angler LED Collapsible Softbox Grid (LCSB-GRID)
To narrow the beam spread and control light spill, attach the accessory grid (available separately) to the recessed touch-connect strips on the front of the softbox.

(40.4 × 41.5 × 18.4 cm)

| 15.9 × 16.3 × 7.25 in.

(40.4 × 41.5 × 18.4 cm)

| 15.9 × 16.3 × 7.25 in.

(40.4 × 41.5 × 18.4 cm)

LED Opening (W × H)| 8 × 8 in.

(20.3 × 20.3 cm)

| 10.5 × 5.2 in.

(26.7 × 13.1 cm)

| 11.5 × 11.5 in.

(29.2 × 29.2 cm)

Weight| 12.8 oz. (363 g)| 12.9 oz. (366 g)| 13.3 oz. (377 g)
Material| D iffuser: Polyester

Sid e a nd rea r p a nels: Polyester

Inner p a nels: Silver-coated polyester

Limited Warranty

One-Year Limited Warranty

• This Angler product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider’s discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment.
• Inoperability of the product or part(s) shall be determined by the warranty provider.
• If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function.
• This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY
• PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
• This warranty provides you with specific legal rights, and you may also have additional rights that vary from state to state.
• To obtain warranty coverage, contact the Angler Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to the Angler along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.
• For more information or to arrange service, visit www.anglerlights.com. or call Customer Service at 212-594-2353.
• Product warranty provided by the Gradus Group.
• www.gradusgroup.com.
• Angler is a registered trademark of the Gradus Group.
• © 2021 Gradus Group LLC. All Rights Reserved.
• LCSB-88
• LCSB-1206
• LCSB-1212
• https://manual-hub.com/.

References

• Manual-Hub.com - Free PDF manuals!
• Angler | Lighting Equipment & Accessories
• Gradus | Gradus Group
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>