D-Link Model Name Firmware Release Notes Instruction Manual
- June 7, 2024
- D-Link
Table of Contents
D-Link Model Name Firmware Release Notes
Revision History and System Requirement:
Firmware Version| Date| Model| Hardware
Version
---|---|---|---
TO_1.00| 2016-07-29| DSL-G225| J1
TO_1.00| 2016-08-12| DSL-G225| J1
TO_1.00| 2016-08-19| DSL-G225| J1
TO_1.00| 2016-09-01| DSL-G225| J1
TO_1.00| 2016-09-14| DSL-G225| J1
AU_1.0.0| 2016-09-21| DSL-G225| J1
AU_1.0.0| 2016-10-08| DSL-G225| J1
AU_1.0.0| 2017-01-13| DSL-G225| J1
AU_1.0.0| 2017-03-09| DSL-G225| J1
AU_1.0.1| 2017-03-13| DSL-G225| J1
AU_1.0.2| 2017-03-22| DSL-G225| J1
AU_1.0.3| 2017-12-15| DSL-G225| J1
AU_1.0.4| 2018-05-28| DSL-G225| J1
AU_1.0.4| 2018-10-18| DSL-G225| J1
AU_1.0.4| 2018-12-29| DSL-G225| J1
AU_1.0.4| 2019-02-22| DSL-G225| J1
AU_1.0.5| 2019-03-22| DSL-G225| J1
AU_1.0.5| 2020-02-19| DSL-G225| J1
AU_1.0.5| 2020-03-03| DSL-G225| J1
AU_1.0.5| 2020-03-25| DSL-G225| J1
Upgrading Instructions:
Change Log
| Firmware Version | Problems Fixed |
|---|---|
| TO_1.00 | First Release. |
| --- | --- |
TO_1.00
| 1. Fixed some bug about the pages.
2. removed all DHCP Reservation entries when host name is changed
3. removed all DHCP Reservation entries when host name is changed
TO_1.00| 1. Support VDSL.
TO_1.00
| 1. Support IPv6.
2. Fix some bug.
TO_1.00| 1. Change the default value of WlObssCoex to disabled.
AU_1.0.0| 1. Modify the default cfg according to the customer.
AU_1.0.0| 1. Enable SRA feature by default.
AU_1.0.0| 1. Fixed failover process restart too many times.
AU_1.0.0
| 1. Fix for LAN DHCP Server hide when add a bridge and a IPoE wan service
AU_1.0.1
| 1. Fix the bug of bridge mode , doesn’t select DHCP server enable and disable
2. Fix the bug of GE WAN port 100F , the PPPoE mode doesn’t work .
3. Modify the FWversion.
AU_1.0.2
| 1. Fix the bug of bridge mode (VDLS ) port mapping , just allow to let group ethernet port , the group LAN port can access G225 , the rest of LAN ports ( not in the group) can not access G225 web UI
2. Fix the bug of G225 MER or PPPoE mode on VDSL , can select DHCP enable or disable but just only enable DHCP sever work .
3. Fix the bug of VDSL PPPoE can not dialing ok in the front.
4. Update SWversion to 1.0.2
AU_1.0.3
| 1. Fix the bug of DHCP server enabled again after reboot, although it have
been disabled before reboot.
AU_1.0.4
| 1. Fix the bug of internet access failed due to the DNS proxy issue.
2. Update the copy right limit to 2008-2018
3. Update the software version to Au_1.0.4
AU_1.0.4
| 1. Disabled unused ports.
2. Modified the password encrypt issue when login through GUI.
---|---
AU_1.0.4
| 1. Correct the login level when access from WAN side and avoid the blank
page issue when enter the Port Forwarding page form WAN side.
AU_1.0.4
| 1. Fixed the bug of authentication error if input “Enter”, when
from web page.
| login
AU_1.0.5
| 1. Change the wireless driver from version 6.37.14.4803.cpe4.16L02.0-kdb to 7.14.43.21.cpe4.16L02.0-kdb.
2. Update the FW version to AU_1.0.5.
AU_1.0.5| 1.| Fixed a security breach for ping.
AU_1.0.5
| 1.
| Fixed a security breach for all cli commands.
Changed “sh” command to “Dlink@CLI” for system security. Removed cat, echo, pwd and kill commands in cli list.
AU_1.0.5
| 1.
| Added a prompt box when build bridge wan. Fixed wan command.
Basic Factory Default Settings:
LAN interface IP: 192.168.1.1
Subnet Mask: 255.255.255.0
WAN interfaces :
System:
1 、 Administrator Username/Password(from LAN) : admin/admin
2 、 User Username/Password: user/ user
3 、 DHCP Server: Enabled
4 、 DNS:
5 、 Signature: None
Special Settings:
Restore Default Settings:
Press the restore button 5 seconds.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>