CTA PAD-CHKLB Premium Thin Profile Floor Stand Instruction Manual
- June 13, 2024
- CTA
Table of Contents
CTA PAD-CHKLB Premium Thin Profile Floor Stand
CONTENTS
INSTALLATION
- Assembling Floor stand :
1A. Align the base plate (B) with floor stand body (A) and rotate in the screws(D) from below with the alien key (H) until securely tightened.
- Attaching Enclosure to VESA:
2A. Align enclosure vesa holes of enclosure (C) to VESA plate holes of floor stand (A). Rotate in screws (F) using provided tool (J) while holding hex nut (E) from behind with fingers.
- Setting up Device and Enclosure
3A. Lock or unlock your tablet enclosure (CJ with security key (GJ as shown. 3B. Find the appropriate size foam padding ( JJ for the tablet you wish to use. Make sure device is compatible for the enclosure (CJ. Lay in device and connect any cables/cords as needed.
3C. If needed, fay-in correct included masking insert (JJ. Close and lock enclosure afterwards and you’re set.
- Cable Routing
4A. Plug one end of the tablet cord into device, and route the other end through hole in the back as shown above.
4B. Cable route from enclosure to the hole at the top of the body as shown above.
4C.lnsert the cable through the cutouts at forestland head and take it out in the cutout of the back of the base.
Adjusting Angles and Orientation
Tilt up/down for preferred angles as needed. Rotate left and right for preferred orientation.
Customers Support
36 Taaffe Place Brooklyn, NY 11205
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>