QAZQA 106545 Triangolo Design Hang Lamp Instruction Manual
- June 14, 2024
- QAZQA
Table of Contents
QAZQA 106545 Triangolo Design Hang Lamp
Product Information
Specifications:
- Model: Triangolo HL
- Model Numbers: 106544, 106545, 106546
- Voltage: 220-240V~
- Frequency: 50Hz
- Socket Type: E27
- Maximum Wattage: 40W
- IP Rating: IP20
- Dimensions:
- Height: 150cm
- Width: 10cm
- Depth: 16cm
- Manufacturer:
- FittinQ B.V. – Smaragdweg 52, 5527 LB Hapert, The Netherlands
- FittinQ LTD – 55 Baker Street, London, W1U 7EU, United Kingdom
Product Usage Instructions
Installation:
- Ensure the power source is switched off before installation.
- Assemble the lamp according to the provided instructions.
- Place the lamp in the desired location and secure it properly.
- Insert a compatible E27 bulb with a maximum wattage of 40W.
- Switch on the power and test the lamp to ensure proper functionality.
Maintenance:
Regularly clean the lamp using a soft, dry cloth to prevent dust build-up.
Avoid using harsh chemicals or abrasive materials that may damage the lamp’s
surface.
Safety Precautions:
- Avoid exposing the lamp to water or moisture to prevent electrical hazards.
- Do not exceed the maximum recommended wattage to avoid overheating and potential damage.
- If the lamp shows any signs of damage or malfunction, discontinue use immediately and seek professional assistance.
Usage Recommendations:
This lamp is suitable for indoor use only. Avoid placing it near flammable
materials or in high-temperature environments.
Frequently Asked Questions (FAQ)
-
Q: Can I use LED bulbs with this lamp?
A: Yes, you can use LED bulbs with an E27 socket fitting as long as they do not exceed the maximum wattage of 40W. -
Q: Is this lamp suitable for outdoor use?
A: No, this lamp is designed for indoor use only and should not be exposed to outdoor elements.
Installation
Dimension
Overall Sizes:
SAFETY INSTRUCTION
Please study the instruction manual and the below information carefully before installing or using this product.
Please keep this user manual for further reference
- The luminaires may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.
- Maintenance of the luminaires is limited to their surfaces. During maintenance, no moisture can come into contact with any areas of the terminal connections or voltage control parts.
- The electrical supply must be switched off at the outset, preferably using a switch in the distribution box, before any installation, maintenance, or repair work is undertaken.
- Exterior lighting must not be installed during rain.
- Take account of the minimal separation distance from other objects and the room required around the fitting.
- If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
- Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low-voltage conductors.
- Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
- Take account of all available technical information.
- Meaning of symbols:
- This icon indicates the level of water-proof and dust-proof
- Protection Class I: the fitting must be earthed
- Protection Class II: the fitting is doubled insulated and does not require earthing
- Protection Class III: the fitting is low-voltage
- Minimum distance from lighted objects (meters)
- The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceeded; different items require different kinds of light sources with different bulb icons
- The armature is designed to work only with the indicated voltage. Different items require different working voltages.
- The luminaire can be used in combination with a dimmer
- The luminaire can be dimmed by a wall switch
- The reference light angle and light space of the luminaire
- This luminaire cannot be disposed of together with normal domestic waste in a standard rubbish can, but you have to bring it to a staging area for electrical waste
- Take note of the symbols when connecting wires:
Contact Information
FittinQ B.V.
- Smaragdweg 52, 5527 LB Hapert, The Netherlands
- www.qazqa.nl.
FittinQ LTD
55 Baker Street, London, W1U 7EU United Kingdom.