MONSTER 2MNAC0328W0L2 Power Shield Hub Extender User Manual

MONSTER 2MNAC0328W0L2 Power Shield Hub Extender

ATTACHING THE METAL PLATE

STEP1. CLEAN WALL WITH RUBBING ALCOHOL. DONOT USE HOUSEHOLD CLEANERS.

STEP 2. AFTER THE WALL IS CLEAN AND DRY, REMOVE LINING FROM 3MTM STICKER AND PRESS METAL FIRMLY FOR 30 SECONDS.

(*WARNING: ADHESIVE MAY BECOME PERMANENTOVER TIME)
CAUTION
DO NOT HANG OVER BEDS OR ON WALLPAPER. USE INDOORS 509-1059F.

CAUTION

DANGER:ELECTRICAL CORDS CAN BE HAZARDOUS Misuse Can Result In FIRE or DEATH by ELECTRICAL SHOCK Please Read Carefully and FOLLOW ALLDirections DURING USE

• DO NOT USE WHEN WET.
• DO NOT MOUNT OR SUPPORT CORD SET OR STRINGS IN A MANNER THAT
• CAN CUT OR DAMAGE WIRE INSULATION.
• KEEP CHILDREN AND PETS AWAY FROM CORD.
• DO NOT PLUG ONE EXTENSION CORD INTO ANOTHER.
• AVOID OVERHEATING.
• DO NOT DRIVE, DRAG OR PLACE OBJECTS OVER CORDS
• DO NOT WALK ON CORD
• ADHESIVE STICKER MAXIMUM WEIGHT LIMIT: 2LBS.
• GRASP PLUG TO REMOVE FROM OUTLET
• ALWAYSs STORE CORD INDOORS.
• ALWAYS UNPLUG WHEN NOT IN USE.
• DO NOT UNPLUG BY PULLING ON CORD.
• INSPECT THOROUGHLY BEFORE EACH USE. DO NOT USE IF DAMAGED.
• DO NOT RUN THROUGH DOORWAYS,HOLES IN CEILINGS, WALLS OR FLOORS.
• FULLY INSERT PLUG INTO OUTLET.
• DO NOT REMOVE, BEND OR MODIFY ANY METAL PRONGS OR PINS OF CORD.
• DO NOT USE EXCESSIVE FORCE TO MAKE CONNECTIONS
• DO NOT cONNECT A THREE-PRONG PLUG TO A TWO-HOLE CORD.

PRODUCT SPECIFICATIONS

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a wireless power charger, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, Uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does caUse harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a crcuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the product. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Customer Service:877-543-3540
The M Monster logo, and Powered by Monster are trademarks or registered trademarks used under license of Monster, Inc. c2021 All rights resenved. Manufactured, marketed and distributed by Lifeworks Technology Group, LLC. under license. Made in China

Documents / Resources

| MONSTER 2MNAC0328W0L2 Power Shield Hub Extender [pdf] User Manual
2MNAC0328W0L2, Power Shield Hub Extender, 2MNAC0328W0L2 Power Shield Hub Extender, Shield Hub Extender, Hub Extender, Extender
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>