Linklike Elite 12 True Wireless Earbuds User Manual
- June 7, 2024
- Linklike
Table of Contents
Linklike Elite 12 True Wireless Earbuds
[email protected]
[email protected]
Contact us for any questions:
° Fit issue
° Pairing issue
° Cut-in/Cut-off issue
° Sound quality
° Call issue
° Battery/Charging issue
° Quality related issue ° Others
PRODUCT OVERVIEW
Charging Case
Earbuds
CHARGING
Before the first time using, please fully charge the earbuds and charging
case.
Charging the Earbuds
To charge the earbuds, please put them back into the charging case (the
charging case must have power). It takes approx. 2 hours to fully recharge the
earbuds. Note: Fully dry off the earbuds and the USB C charging port before
charging. When the battery level of the earbuds is less than 10%, you will
hear a prompt.
Charging the Charging Case
To charge the charging case, connect the USB C charging cable to the charging
case and then to an adapter (not included). Press the Multi-functional button
once on the side of the charging case to check the battery status. It takes
approx. 2 hours to fully charge the earbuds and the charging case.
WEARING
Step 1 Please check the “R” and “L” labels on the earbuds.
Step 2 Put the earbuds into the corresponding ears.
Step 3 Try rotating the pod to make sure the pod fits comfortably and
securely in the ear canal. Otherwise, the pod can easily fall off during a
workout.
POWERING ON OFF
Power On
Open the charging case, the earbuds will automatically power on.
Power Off
° Put the earbuds back into the charging case and close the case, the
earbuds will automatically power off.
° The earbuds will automatically power off when connected to no devices
for more than 5 minutes; Put the earbuds back into the charging case, close
and then open the case, the earbuds will power on again.
WARRANTY CARD
Buyer Name:____
Date of Purchase:____
Phone Number:____
Address:____
Order ID:____
Warranty Period:__12 Monts_____
Issue:____
Email us to enroll in our VIP program and gain an extra half a year warranty.
linklike-audio.com
[email protected]
[email protected]
Link like is a trademark registered in the USA and other countries. All rights
reserved.
PAIRING
Initial Pairing
To pair smoothly, please connect the earbuds to your Bluetooth devices within
a 0.5 meters range. Before the first time using, please ensure that the
earbuds are kept in the charging case properly.
Step 1 Open the charging case, the earbuds will automatically power on,
and complete TWS pairing. And then, the LED indicators on the earbuds flash
fast, indicating that the earbuds enter into Bluetooth connection mode and can
be paired to your Bluetooth device.
Step 2 Search and tap “Linklike Elite 12” in your device’s Bluetooth
settings to connect. Once the connection is complete, simply take out both
earbuds (Binaural mode) or one earbud (Single-use mode) to enjoy.
Auto Re-connection
When you open the charging case, the earbuds will automatically power on and
try to reconnect to the most recently connected Bluetooth device. Note: The
Bluetooth device must be powered on and within the Bluetooth transmission
range (33 ft. or 10 m). The earbuds will enter into Bluetooth connection mode
if re-connection fails in 10 seconds. Please tap “Linklike Elite 12” in your
device’s Bluetooth settings to connect.
Re-connection Beyond the Transmission Range
° When the Bluetooth device is beyond the transmission range for less
After 3 minutes, the earbuds can complete auto re-connection. If the re-
connection fails, please tap “Linklike Elite 12” in your device’s Bluetooth
settings to connect.
° When the Bluetooth device is beyond the transmission range for more than 3
minutes, the earbuds will enter into Bluetooth connection mode with LED
indicators fast flash white. The earbuds will automatically power off when
connected to no devices for more than 5 minutes.
LED INDICATORS
Charging Case
Earbuds
TOUCH CONTROLS
Simply tap one Touch button on either earbud to skip music or take a call.
Music
- Voice Assistant feature only works for voice assistant enabled devices.
RESET
Reset the earbuds if the earbuds cannot connect with each other properly or
cannot connect with your device properly.
Step 1 Clear the pairing history of “Linklike Elite 12” in your device’s
Bluetooth Settings.
Step 2 Put the earbuds back into the charging case and keep the case
open.
Step 3 Tap and hold the Multi-functional button on the charging case
until the LED indicators on both earbuds turn off, close the charging case,
the reset will be done.
Step 4 Open the charging case, search and tap “Linklike Elite 12” in your
device’s Bluetooth settings to connect.
Made
in China
SPECIFICATIONS
- Based on the test results of Linklike Lab, for reference only.
WARNING
° The earbuds may drop out in low battery condition or strong interference
(e.g. traffic light or signal in crossroad or door opening/closing of the
elevator).
° Do not use a corrosive detergent to clean this product.
° Keep the product away from fire or any extremely high temperature
such as a cooking stove, to avoid fire hazards or explosion.
° If you do not intend to use this product for a long period of time, please
put the earbuds back into the charging case, and store them in a dry
environment, and charge the earbuds at least once a month to prolong their
life.
° Do not charge below zero degrees Celsius. Charging below zero degrees
Celsius may damage the battery.
° Permanent hearing damage may occur when earbuds are used at high volume
levels for long periods of time.
° Do not disassemble, strike, squeeze or put into the fire. Once it is
bulging, do not continue to use it.
° Do not put in a high-temperature environment.
° Do not use the product in situations that require focused attention (e.g.
When driving or performing skilled jobs).
° Keep the product, accessories, and packaging parts out of reach of children
and pets to prevent accidents and choking hazards.