Linklike Fly 8 Neckband Bluetooth Earphones User Manual

: June 7, 2024
: Linklike

Table of Contents

PRODUCT OVERVIEW
POWER ON/OFF AND PAIRING
CHARGING
RESET
SPECIFICATIONS
IMPORTANT SAFETY INFORMATION
FCC WARNING
WARRANTY CARD
Documents / Resources

User Manual
Fly 8 Neckband Bluetooth Earphones

Linklike Fly 8 Neckband Bluetooth

Write to [email protected]
Contact us for any questions:

Fit issue
Pairing issue
Cut-in/Cut-off issue
Sound quality
Call issue
Battery/Charging issue
Quality related issue
Others

PRODUCT OVERVIEW

Fly 8 Neckband Bluetooth Earphones

Ear tips
Left earbud
Right earbud
Volume-up button
Multi-function button
Volume-down button
LED indicator
Micro USB charging port
Battery
The microphone is behind the Volume-down button

Please fully charge the earphones before the ﬁrst use.

POWER ON/OFF AND PAIRING

First-time pairing: long press the multi-function button for about 2 seconds until “power on” voice prompts, then the earphones enter into pairing mode. Go to the Bluetooth setting in your device, ﬁnd and tap “Link like Fly 8” to connect.

Function| Current Status| Operation| LED Indicator| Voice Prompt
---|---|---|---|---
To power on| Power off mode| Long press the multi-function button for about 2 seconds| Purple light flashes| Power on
To power off| Power-on mode| Long press the multi-function button for about 3 seconds| Purple light flashes| Power off
Connected| N/A| N/A| N/A| Connecting
Connection Failed| N/A| N/A| N/A| Connection failed

Notes:

After the ﬁrst connection, these earphones will automatically reconnect to the previous device after powering on.
Earphones will automatically power off 3 minutes later without any operation after powering on.

If you want to connect the earphones to another device,

Function| Current Status| Operation| LED Indicator| Voice Prompt
---|---|---|---|---
To enter pairing mode| Power off mode| Long press the multi-function button for about 5 seconds| Red and blue lights flash alternately| Pairing

CHARGING

Please fully charge the earphones before the ﬁrst use. Recharge the earphones when the “Battery Low” voice prompts.

Status	LED Indicator
Battery Low	Red light flashes
Charging	Solid red light
Fully Charged	Solid blue light

WEARING
Make sure that you insert the earbuds marked “L” and “R” into corresponding ears. Try the ear tips included to ﬁnd the pair that ﬁt your ears the best. Contact us if all the ear tips included didn’t ﬁt well, we will offer you an effective solution.

Function	Operation	Voice Prompt

※Designed for phones. Button and microphone features may not work on certain PCs, tablets.

RESET

Step 1.Clear the pairing history of “Link like Fly 8” in your device’s Bluetooth setting.
Step 2.When the earphones are on, long-press the volume-down and volume-up buttons for about 5 seconds until the purple light ﬂashes.
Step 3.Earphones enter into pairing mode when red and blue lights ﬂash alternately.
Step 4.Go to the Bluetooth setting in your device, ﬁnd and tap “Link like Fly 8” to connect.

SPECIFICATIONS

Product name| Fly 8 Neckband Bluetooth
Earphones| Model| Fly 8
---|---|---|---
Bluetooth version| 5.0| Speaker size| 10mm
Transmission range| < 33ft| Frequency range| 20-20000Hz
Charging time| z 3hrs| Sensitivity| 98±3dB
Music playtime/Talk time| z 8hrs| Impedance| 160
Standby time| z 120hrs| Battery capacity| Li-Polymer Battery
3.7V/105mAh
Working temperature| 0C-45C| Lithium battery
charging limited
voltage| 4.2V

Based on the test results of Link like Lab, for reference only

IMPORTANT SAFETY INFORMATION

Do not remove or replace the batteries and the sensitive electronic components included in the batteries that can be damaged or cause injury if dropped, burned, punctured, crushed, disassembled, or if exposed to excessive heat or liquid. Don’t use damaged batteries and electronic components.
Disposal and recycling information
Don’t treat the product and battery as household waste or into a ﬁre. When you decide to dispose of the product and its battery, please follow the local environmental laws to handle the battery to avoid an explosion.
Medical device interference
The product contains components and radios that emit electromagnetic ﬁelds and also contains magnets. These electromagnetic ﬁelds and magnets may interfere with pacemakers, deﬁbrillators, or other medical devices. Maintain a safe distance of separation between your medical device and product. Consult your physician and medical device manufacturer for information speciﬁc to your medical device. Stop using the product if you suspect it is interfering with your pacemaker, deﬁbrillator, or any other medical device.
Listening Responsibility
To avoid hearing impairment, please make sure to turn down the volume of the music player before connecting the earphones. After putting the earphones into/onto the ears, turn up the volume gradually until to a comfortable listening level. Noise level is measured in de- cibels (DB). Exposure to 85db or higher noise will lead to gradual hearing impairment. Please supervise your usage and the hearing impairment is a function of loudness against time. The louder the sound is, the shorter you can
be exposed. The softer the sound is, the longer you can listen.

CAUTION

Use the Bluetooth earphones in the environment with the temperature between 0℃ and 45℃.

The product shall only be connected to a USB interface of version USB 2.0 or higher and that the connection to a power USB is prohibited.

For battery: risk of explosion battery is replaced by an incorrect type, dispose of used batteries according to the instructions.

To prevent possible hearing damage, do not listen to high volume levels for long periods.

Made in China

FCC WARNING

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.