SHARP 24EE3K 24 Inch HD Ready Smart TV User Guide
- June 10, 2024
- Sharp
Table of Contents
Quick Start Set Up Guide
For information on using the TV’s features, please refer to the Operating
Instructions which can be found online.
Model Numbers
24EE3K 24EE3KR 24EE3KW 24EE4K
24EE6K 24EE7K
Register your manufacturers guarantee online within 14 days of purchase
at www.registertoday.co.uk/sharp and
enter into a prize draw to…
**Win a Soundbar
Terms and conditions apply. Online registration only.nly.
24EE3K 24 Inch HD Ready Smart TV
Quick & easy guide for setting up your TV
What is included in the box
Using the remote control
Setting up the TV for the fi rst time – including attaching the stand
Connecting other devices to the Television
Need help setting up or using your TV?
Please contact the UK & ROI Helpline
Telephone UK 0330 024 0803 or ROI 01443 3323
Online support at: www.umc-uk.co.uk
Email support at: [email protected]
Calls to 0330 numbers are charged at standard call rates and are included as part of any bundled minutes with your phone provider. Hours are correct at time of this document being published.
Please note these hours are subject to change periodically.
Calls to the ROI number are charged at the local call rate.
The telephone opening hours are:
Monday to Friday: 8.30am – 6pm
Saturday: 9am – 5pm
Bank Holidays: 10am – 4pm
Closed Christmas and New Years day.
Online Manual
To launch the Online Manual, press the [MENU] button and then select Settings
Setup > Help Information
What is included in the box
Accessories
Included with this TV are the following accessories
1 x Quick Start Guide
1 x Remote Control and 2 x AAA Batteries
1 x Stand installation pack
1 x Safety Leafl et
If you don’t have the RF cable shown below, then you can purchase one from www.umc-uk.co.uk/cables
If you are intending to connect your TV to an RF socket in order to receive Freeview you will need this cable.
RF Cable
Microsoft PlayReady™
This product contains technology subject to certain intellectual property
rights of Microsoft. Use or distribution of this technology outside of this
product is prohibited without the appropriate license(s) from Microsoft.
Content owners use Microsoft PlayReady™ content access technology to protect
their intellectual property, including copyrighted content. This device uses
PlayReady technology to access PlayReady-protected content and/ or WMDRM-
protected content. If the device fails to properly enforce restrictions on
content usage, content owners may require Microsoft to revoke the device’s
ability to consume PlayReady-protected content. Revocation should not affect
unprotected content or content protected by other content access technologies.
Content owners may require you to upgrade PlayReady to access their content.
If you decline an upgrade, you will not be able to access content that
requires the upgrade.
Freeview Play brings together live TV viewing with ‘‘catch up’’ TV services
such as BBC iPlayer, ITV player, More4 and Demand 5. The Freeview Play Explore
app features a carousel of genres to select from when searching for
programmes, such as sport, comedy, dramas and soaps, etc. Content is made up
from recommendations of the major broadcasters and off ers an alternative means
of searching.
Note that to use the full functionality of Freeview Play your set must be
connected to the internet.
Please save your box/packaging as you will need this in the event of
warranty/service repair or support. We are unable to carry out
warranty/service if you are unable to package it correctly. The safest way to
package your item in the event of warranty/service repair is in it’s original
box/packaging.
Sky Remote Code
If you wish to use your Sky remote to operate the TV’s basic functions, you
will need a Sky remote control (Revision 9 or later) and you will need to
program it with the code 2134. If you wish to use your Sky Q remote to operate
the TV’s basic functions, you will need to program it with the code 4170.
Setting up the TV set for the fi rst time
1 Fitting the stand
For stand installation, there are two types of screws provided as shown below.
To complete the stand installation you will require a cross head screw driver.
Place the TV set on a flat and clean surface with the panel facing downwards to
avoid damage.
3 x M (4×12)
4 x ST (4×12)
Used for attaching the stand base to the stand neck (fi g.3)
- Attach the stand neck to the rear of the TV set using the 3 x M(4×12) screws
- Peel off the protective plastic cover then attach the stand base to the neck.
- Secure the base to the neck by using the 4 x ST(4X12) screws provided.
HELPFUL ADVICE FOR FIRST TIME STAND INSTALLATION
When securing the self-tapping screw/s into the base of the stand (on first
installation) the screw/s will be naturally tight as they create a thread in
the plastic of the stand neck in order to support a TV of this size.
A. Ensure the cross head screw driver tip fi ts correctly into the head of the
screw and that it is not too big or small.
B. Screw in all screws individually and partially before tightening all of the
screws fully.
C. If they become very tight try loosening them slightly and then re-
tightening them once again as this will continue the process of creating the
thread for the screws.
Register your manufacturers guarantee online within 14 days of purchase at
www.registertoday.co.uk/sharp and
enter into a prize draw to win a Sharp Soundbar
Terms and conditions apply. Online registration only.
Connecting your set
Connect the TV to your power socket.- If you wish to use the TV to receive Freeview/Saorview channels, connect the RF input from the TV to your outdoor Digital TV aerial. If you do not wish to receive Freeview/Saorview, skip this step.
3 Button layout
Remote Control: Installing Batteries
Insert the batteries supplied into the remote control and press the standby
button to power on the TV
Wall Mounting the TV
Image for illustration only.
For the dimensions of the VESA mounting, please refer to the Technical Specifi
cations section of this document.
-
Remove the four screws that are supplied in the wall mounting holes.
-
The wall mount can now be easily attached to the mounting holes on the rear of the TV. Install the wall mounting bracket to the television as advised by the bracket
manufacturer. -
The picture shows the use of spacers, which are not applicable to all sets/installations.
First time installation
When the set fi rst turns on, it enters the First Time Installation mode. This
can be restarted by restoring the set to default settings in the ‘About TV’
Menu.
Select your preferred on-screen display language. This will change the
language in which the menus and associated information is displayed in.
Select the correct country in which the set will be used in. This will enable the set to correctly install the functions applicable in the country of use.
This needs to be set to establish parentol controls.
Set the Time Zone in which the TV will reside. This may be dependent on the country you select in step 2.
You will need to agree to certain information collection for the TV set to operate as intended.
You can connect the TV to your broadband router or wireless network in order to take advantage of the Smart functions. If you connect the TV to your router using an Ethernet cable, the Wifi set up will be skipped.
If you have a Netflix account, it can be set up on the television here. Once
set up and validated, the First Time Installation returns to the next
step.
Home Mode: For normal use, by default it is set to a power saving
mode which reduces the energy used by up to 25% (by reducing the power to the
LED/LCD panel). This can be changed in the picture mode settings.
Choose to install terrestrial channels via Digital or Analog signals.
Note: Analog signals in the United Kingdom have been turned off .
Only Digital signals are available.
Connectivity
| A LAN* | Digital optical audio output |
|---|---|
| B Digital audio | Video input |
| Video | Audio Shared for video |
| D L/R | HDMI input |
| E HDMI 3 | HDMI input |
F
HDMI 2| Satellite Input
RF In| RF / TV Aerial input
HDMI 1 (ARC)| HDMI input with ARC
USB 2.0| USB 2.0 input x2
Earphones| Earphones Input
Service Input| Input used by Service Centers
TF Card In| Micro SD Card input
CI card in| Common interface module
Technical Specifi cation
| 24EE3K
24EE3KR
24EE3KW
24EE4K
24EE6K
24EE7K
---|---
Energy Efficiency Class (SDR)| E
Power consumption (SDR)| 17 W
Screen resolution (pixels)| 1366 x 768
Screen Size (diagonal)| 60 cm / 24 inches
RF| 75 ohm Antenna / Analog / DVB / Satellite
Inputs| 3 x HDMI • 2 x USB • 1 x Micro SD card slot
1 x R.145 LAN/Ethernet • 1 x Composite/CVBS Video
1 x UR Audio input for Composite/CVBS
Sound Outputs| 1 x Digital Optical Audio output, 1 x 3.5mm Headphone
Speaker`/ Amplifier Watts (RMS)| 2x 5/2 x3
Voltage and power consumption| AC 220V – 240V; 50Hz
17/40W
(home mode/max)
(<0.5W in Standby)
Dimensions including stand (mm)| 560W x 385H x 140D
Net weight (Kgs)| 4.
\ Wall Mounting| VESA 100 x 100 (mm)
The terms HDMI, HDMI High-Defi nition Multimedia Interface, HDMI trade dress
and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing
Administrator, Inc.
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and
the double-D symbol are trademarks of Dolby Laboratories Licensing
Corporation.
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS, Inc. (for companies headquartered in the
U.S./Japan/ Taiwan) or under license from DTS Licensing Limited (for all other
companies). DTS, DTS-HD Master Audio, DTS-HD, Virtual:X, and the DTS-HD logo
are registered trademarks or trademarks of DTS, Inc. in the United States and
other countries. © 2021 DTS, Inc. ALL RIGHTS RESERVED.
SHA/QSW/0258
Documents / Resources
|
SHARP 24EE3K 24 Inch HD Ready Smart
TV
[pdf] User Guide
24EE3K 24 Inch HD Ready Smart TV, 24EE3K, 24 Inch HD Ready Smart TV, HD Ready
Smart TV, Ready Smart TV, Smart TV, TV
---|---
References
- Patents - DTS
- registertoday.co.uk
- UMC - Product Support, Sharp, Blaupunkt, Technika, e-motion, Eternity, JMB and Bush
- UMC UK LTD | Warranty & Technical Support