Linklike H26 Pro Bluetooth Neckband Headphones User Manual
- May 15, 2024
- Linklike
Table of Contents
Linklike H26 Pro Bluetooth Neckband Headphones
OVERVIEW
INSTRUCTIONS
Power on / Power off
Power on: Press and hold the ” ” button for 2 seconds, the white indicator
light will light up for 1.5 seconds.
Power off: Press and hold “ ” for 3 seconds, the red indicator light will light up for 1.5 seconds.
PAIRING
- When using the headphones for the first time, you need to pair them with a Bluetooth device.
Open the phone settings, select Bluetooth, turn it on, and search for “H26 PRO” in the list. Click on it to establish a connection. The white light on the headphones will illuminate for 1.5 seconds, indicating a successful connection.
Auto Reconnection
After turning on the headphones, they will automatically reconnect to previously paired devices (the white light will blink for 1 minute). If there is no connection or connection failure within 3 minutes, the headphones will automatically turn off after the red light illuminates for 1.5 seconds.
BUTTON OPERATIONS
CHARGING REMINDER
When the headphone’s battery is low, it will provide a voice prompt every 2 minutes, and the red light will flash quickly 2 times per 30 seconds. Please charge the headphones in a timely manner. (The headphones will automatically power off if the battery voltage is below 3.15V)
Note: If the headphone remains without power for a long time, the battery life
will be shortened. It is recommended to charge the headphone once a month.
VIEW BATTERY LEVEL
Depending on the operating system, you can view the headphone battery level on
the phone’s lock screen or in the top notification bar.
ATTENTION
- Do not use corrosive cleaning agents to clean this product.
- Do not use this product in high-temperature or humid environments. Keep it away from heat sources and flames, such as stoves, to avoid explosions.
- This product does not have any user-serviceable parts. Do not disassemble or modify it.
- If the headphones remain without power for a long time, the battery life will be significantly shortened. It is recommended to charge the headphones at least once a month.
- Do not charge the product in temperatures below zero, as it may damage the battery.
- Do not use this product during thunderstorms as it may cause abnormal operation and increase the risk of electric shock.
- Adjust the system volume to a moderate level when using this product for an extended period. Prolonged exposure to high volumes can risk hearing damage.
- Do not use this product in situations that require special attention, (such as during transportation or while performing skilled tasks).
- When using a charger for power supply, purchase or use a charger that has obtained certification and complies with standard requirements.
- To ensure uninterrupted use of this product, use a charging adapter that complies with national standards.
- Keep product accessories and packaging components out of reach of children and pets to prevent accidents
- and choking hazards.
WARNING
This product is equipped with a built-in lithium battery, and please pay attention to the following:
- Please charge the product in a time when the battery is low. To protect the battery when not in use for a long time, please turn on the product every 3 months until the battery power runs out and then fully charge the product. It is recommended to use and store it in a suitable environment.
- It is forbidden to disassemble, hit, squeeze or throw it into fire. If severe swelling occurs, stop using it. Do not place it in a high-temperature environment. If the battery life is seriously shortened, stop using it and handle it for professional maintenance.
- There is a risk of explosion if the battery is improperly replaced, and it can only be replaced with a battery of the same or equivalent type by a professional.
- The battery (battery pack or assembled battery) shall not be exposed to an overheated environment such as sunlight or fire.
- Products containing lithium batteries should be handled separately from household waste. If the product is disposed of, please put it into the designated recycling locations or hand it over to the environmental protection recycling department for disposal, and cannot discard it at will.
FCC STATEMENT
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, under Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>