LinkLike LKPI01014A Genie 10 True Wireless Earbuds User Manual
- June 5, 2024
- Linklike
Table of Contents
User Manual
Genie 10 true Wireless Earbuds
support.us@linklike-audio.com
support.uk@linklike-audio.com
Contact us for any questions:
- Fit issue
- Pairing issue
- Cut-in/Cut-off issue
- Sound quality
- Call issue
- Battery/Charging issue
- Quality related issue
- Others
PRODUCT OVERVIEW
CHARGING
Before the first-time use, please fully charge the earbuds and the charging case. Simply check the battery status of the charging case by flashing the LED indicators.
Charging the Charging Case
To charge the charging case, connect the USB-C charging cable to the charging
case and then to an adapter (not included). It takes approx.1.5 hours to fully
charge the charging case.
When the charging case is being charged, the battery level indicator on the
charging case shows the charging case’s battery level as below
Charging the Earbuds
- When the earbuds are being charged, the battery level indicator on the charging case shows the charging case’s battery level. After 4 seconds, the lights will turn off.
- To charge the earbuds, please put them back into the charging case (the charging case must have a battery). It takes approx.1.5 hours to fully recharge the earbuds. Check the earbud’s battery status in your phone’s notification bar after connecting.
WEARING
Step: 1 Please check the “R” and “L” labels on the earbuds.
Step: 2 Put the earbuds into the corresponding ears.
Step: 3 Try rotating the pod to make sure the pod fits comfortably and
securely in the ear canal. Otherwise, the pod can easily fall off during a
workout.
POWERING ON/OFF
Power On
-
Open the charging case, the earbuds will automatically power on (the charging case must have a battery).
-
To manually power on the earbuds, press and hold the multi-function buttons on both earbuds for about 3 seconds.
Power Off
- Put the earbuds back into the charging case and close the case, the earbuds will automatically power off (the charging case must have a battery).
- To manually power off the earbuds, press and hold the multi-function buttons on both earbuds for about 6 seconds.
- The earbuds will automatically power off when connected to no devices for more than 5 minutes; Put the earbuds back into the charging case, close and then open the case, and the earbuds will power on again.
- The earbuds will automatically power off when the battery is low.
WARRANTY CARD
Buyer Name:—————————————–
Phone Number:———————————–
Order ID:—————————————
Issue:——————————————
Date of Purchase:—————————
Address:————————————–
Warranty Period: ————–12 Months———————–
PAIRING
Initial Pairing
To pair smoothly, please connect the earbuds to your Bluetooth device within a
0.5 meters range. Before the first time use, please ensure that the earbuds
are kept in the charging case properly.
Step:1 Take both earbuds (Binaural mode) or one earbud (Single-use mode)
out of the charging case, the earbuds will automatically power on, and
complete TWS pairing. And then, the earbuds enter into Bluetooth connection
mode and can be paired to your Bluetooth device.
Step: 2 Search and tap”Genie 10″ in your device’s Bluetooth settings to
connect.
Re-connection
-
When you open the charging case, the earbuds will automatically power on and try to reconnect to the most recently connected Bluetooth device.
Note: The Bluetooth device must be powered on and within the Bluetooth transmission range (33 ft. or 10 m). -
When the Bluetooth device is beyond the transmission range for less than 5 minutes, the earbuds can complete auto re-connection. If the re-connection fails, please tap “Genie 10” in your device’s Bluetooth settings to connect.
-
The earbuds will automatically power off when connected to no devices for more than 5 minutes.
LED INDICATOR
Status
|
LED Indicator
---|---
Power on| Flash while for 3 times
Power off| Flash red for 3 times
Pairing mode| Binaural mode: Right earbud slow flash white and red, the left
earbud does not light up; Single-user mode: Slow flash white and red
Connected| LED Indicator lights off
Low battery| Flash red once every second
TOUCH CONTROLS
Music
Pause/ Play| Tap the multi-function button once
Previous track| Double-tap the multi-function button on the left earbud
Next track| Double-tap the multi-function button on the right earbud
Volume down| Press and hold the multi-function button on the left earbud for
more than 1 second
Volume up| Press and hold the multi-function button on the right earbud for
more than 1 second
Calls
Answer calls| Tap the multi-function button once
Hang up/ Reject calls| Press and hold the multi-function button for about 2
seconds
Activate voice assistant*| Triple tap the multi-function button
RESET
Reset the earbuds If the earbuds can not connect with each other properly or cannot connect with your device properly.
Step: 1 Clear the pairing histonj of ‘Genie 10″ in your device’s
Bluetooth Settings.
Step: 2 Press and hold the multi-function buttons on both earbuds for
about 6 seconds to power off the earbuds.
Step: 3 Press and hold buttons on both earbuds for about 10 seconds, and
then put the earbuds back into the charging case and close the case, the reset
will be done.
Step: 4 Take the earbuds out of the charging case. Search and tap
“Genie10′ in your device’s Bluetooth settings to connect.
SPECIFICATIONS
| Name | True Wireless Earbuds |
|---|---|
| Model | Geniel0 |
| Bluetooth Version | 5.0 |
| Bluetooth Transmission Range | 510 m /Open areas without obstacles or |
interruption)
Charging Port| USB-C
Input| SV= 0.5A
Charging Case Capacity| 400 mAh /1.48 Wh
Charging Case Charging Time| -41.5 h
Earbud Battery Capacity| 45 mAh / 0.166 Wh
Earbud Charging Time| m1.5 h
Limited Charge Voltage| 4.2 V
Working Temperature| 0t-45″C
Storage Temperature| -10°C ^ 60 t
Based on the test results of Link like Lab, for reference only.
WARNING
- Do not use a corrosive detergent to clean this product.
- Keep the product away from extremely high temperatures or humidity Do not let this product be heated, close to a fire, or placed in a fire, such as a cooking stove, to avoid fire hazards or explosion.
- The product does not Install any self-maintainable parts, do not remove or refit the headset for any reason.
- If you do not intend to use this product for a long period of time, please put the earbuds back into the charging case, store Them in a dry environment, and charge the earbuds at least once a month to prolong their life.
- Do not charge below zero degrees Celsius. Charging below zero degrees Celsius may damage the battery.
- Do not use the device in thunderstorm weather. Thunderstorms may cause abnormal operation of the device and increase the risk of electric shock
- Permanent hearing damage may occur when the earbuds are used at high volume levels for long periods of time.
- Do not use the product in situations that require focused attention (e.g. When driving or performing skilled Jobs).
- Please purchase or use a charger that has obtained CCC certification and is compliant with the applicable country’s safety standards.
- In order not to affect the normal use of this product, please use a USB-C charging adapter that is compliant with the applicable country’s safety standards.
- Keep the product, accessories, and packaging parts out of reach of children and pets to prevent accidents and choking hazards.
Battery Warning
1. Forbidden to disassemble, hit, crush or throw into fire. Do not place it
in a high-temperature environment.
2. If the battery is improperly replaced, there is a risk of explosion, and
only the same or equivalent type of battery can be replaced.
3. The battery (battery pack or assembled battery) shall not be exposed to
such an overheated environment as sunlight, fire, and so on.
4. Forbidden to use the battery after soaking in water.
5. It contains a lithium battery, please separate it from household garbage.
In order to reduce pollution and protect the global environment to the
greatest extent, please recycle it.
6. If the battery is used improperly, it may explode or leak, causing burns
or other personal injuries. If the battery leaks, you should be careful and
immediately dispose of the battery in accordance with local battery disposal
laws and regulations.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(I) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Pules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help This
device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions (1)this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Link like (Shenzhen) Technology Co., Ltd.
ADD: PM1709, BLK C, Zhantao Technology BLDG, Minzhi Avenue, Minzhi ST,
Longhua DIST, Shenzhen, China
Email us to enroll in our VIP program and gain an extra half a year
warranty.
linklike-audio.com ****support.us@linklike-
audio.com
support.uk@linklike-audio.com
Link like is a trademark registered in the USA and other countries. All rights
reserved.
Made in China 
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>