Samsung The Frame Smart 4K TV User Manual

Samsung The Frame Smart 4K TV User Manual

Samsung The Frame Smart 4K TV User Manual

Before Reading This User Manual

This TV comes with this user manual and an embedded e-Manual. Before reading this user manual, review the following:

Scan this QR code with your smart device to visit Samsung’s online Customer Service Center. You can also use your PC to visit “www.samsung.com” and click Support. On the website, you can download the manuals and see its contents on your PC or mobile device.

Learning the e-Manual’s assistance functions

Warning! Important Safety Instructions

Please read the Safety Instructions before using your TV. Refer to the table below for an explanation of symbols which may be on your Samsung product.

• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this apparatus and to protect it from overheating, these slots and openings must never be blocked or covered. ­
  • Do not place this apparatus in a confined space, such as a bookcase or built-in cabinet, unless proper ventilation is provided. ­
  • Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight. ­
  • Do not place vessels (vases etc.) containing water on this apparatus, as this can result in a fire or electric shock.
• Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc.). If this apparatus accidentally gets wet, unplug it and contact an authorized dealer immediately.
• This apparatus uses batteries. In your community, there might be environmental regulations that require you to dispose of these batteries properly. Please contact your local authorities for disposal or recycling information.
• Do not overload wall outlets, extension cords, or adaptors beyond their capacity, since this can result in fire or electric shock.
• Power-supply cords should be placed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords at the plug end, at wall outlets, and at the point where they exit from the appliance.
• To protect this apparatus from a lightning storm, or when left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.
• Before plugging in the AC power cord of the TV, make sure that the operational voltage of the TV matches the voltage of your local electrical power supply. Refer to the power specifications section of the manual and/or the power supply label on the product for voltage and amperage information.
• Never insert anything metallic into the open parts of this apparatus. This may cause electric shock.
• To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.
• Be sure to plug in the power cord until it is firmly seated. When unplugging the power cord from a wall outlet, always pull on the power cord’s plug. Never unplug it by pulling on the power cord. Do not touch the power cord with wet hands.
• If this apparatus does not operate normally – in particular, if there are any unusual sounds or smells coming from it – unplug it immediately and contact an authorized dealer or Samsung service center.
• Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are going to leave the house for an extended period of time (especially when children, elderly, or disabled people will be left alone in the house).
  • Accumulated dust can cause an electric shock, an electric leakage, or a fire by causing the power cord to generate sparks and heat or by causing the insulation to deteriorate.
• Be sure to contact an authorized Samsung service centerfor information if you intend to install your TV in a location with heavy dust, high or low temperatures, high humidity, chemical substances, or where it will operate 24 hours a day such as in an airport, a train station, etc. Failure to do so may lead to serious damage to your TV.
• Use only a properly grounded plug and wall outlet. ­
  • An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)
• To turn off this apparatus completely, disconnect it from the wall outlet. To ensure you can unplug this apparatus quickly if necessary, make sure that the wall outlet and power plug are readily accessible.
• Store the accessories (batteries, etc.) in a location safely out of the reach of children. · Do not drop or strike the product. If the product is damaged, disconnect the power cord and contact a Samsung service center.
• To clean this apparatus, unplug the power cord from the wall outlet and wipe the product with a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air fresheners, lubricants, or detergents. These chemicals can damage the appearance of the TV or erase the printing on the product.
• Do not expose this apparatus to dripping or splashing.
• Do not dispose of batteries in a fire.
• Do not short-circuit, disassemble, or overheat the batteries.
• CAUTION : There is danger of an explosion if you replace the batteries used in the remote with the wrong type of battery. Replace only with the same or equivalent type.
• WARNING – TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES AND OTHER ITEMS WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.
• Use care when touching the TV after it has been on for some time. Some parts can be warm to the touch.
• State of California Proposition 65 Warning
  WARNING : Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Internet security

Samsung takes a number of steps to protect its Internet-compatible Smart TVs against unauthorized incursions and hacking. For example, certain sensitive communications between the TV and the Internet servers are encrypted. In addition, the TV’s operating system has adopted controls to prevent the installation of unauthorized applications. Although we take steps to protect your Smart TV and personal information, no Internet-connected device or transmission is completely secure. We therefore encourage you to take additional steps to safeguard your TV, secure your Internet connection, and minimize the risk of unauthorized access. These steps are listed below:

• When Samsung releases software updates to improve the security of your TV, you should promptly install these updates. To automatically receive these updates, turn on Auto Update in the TV’s menu ( Home > Settings > Support > Software Update > Auto Update). When an update is available, a popup message appears on the TV screen. Accept the software download and update by selecting Yes when prompted. Take steps to secure your wireless access point and network. Your access point’s manual should provide additional details about how to implement the following measures: ­
  • Secure your wireless access point’s management settings with a unique password to prevent unauthorized changes to security related settings. ­
  • Implement standard encryption (e.g., WPA2 encryption) on your wireless access point to secure your wireless network signal. ­
  • Secure access to your wireless network with a hard-to-guess password. ­
  • Confirm your access point’s firewall setting is enabled (if so equipped). ­
  • Make sure that all your Internet-connected devices are behind your network’s firewall. ­
  • If your access point or modem has a standby mode button, use it to disconnect your home network from the Internet when it is not in use.
• Use strong passwords for all your Internet accounts (Netflix, Facebook, etc.).
• If any unexpected messages appear on your TV screen requesting permission to link a device or enable a remote session, do NOT accept.
• Do not visit suspicious web sites and do not install any suspicious programs. We recommend that users install only those authorized apps provided by Samsung through Samsung Smart Hub.

Figures and illustrations in this User Manual are provided for reference only and may differ from the actual product appearance. Product design and specifications may change without notice.

TV Installation

One Connect Cable Guide

To connect the One Connect Cable to the One Connect and your TV, follow these steps:

1. After the TV is completely set up and placed in its final position, connect the One Connect Cable to the One Connect and the TV as shown in Steps 1 to 3 above.
   WARNING : Make sure that both connectors are fully and firmly connected. If either connecter is not connected properly, there is a danger of severe electric shock.

2. Connect the One Connect AC power cord to the One Connect, and then connect the cord to a wall outlet as shown in Step 4 above.
   WARNING : Follow the directions exactly. Be sure to connect the power cord to the wall outlet as the last step. Always disconnect the power cord from the wall outlet before disconnecting the One Connect Cable from the back of the TV or from the One Connect. ­ See the illustrated Quick Setup Guide for more information.

3. Connect your peripherals (cable box, Blu-ray player, etc.) to the One Connect. See the Accessory Kit for details.

   • Do not install the One Connect upside-down or standing upright on one of its sides.
   • When connecting the One Connect Cable, pay attention to the shapes and sizes of its connectors so that they are connected correctly. Failure to do so may cause product malfunction.
   • When connecting the One Connect Cable, be careful not to twist the cable of the One Connect Cable. Failure to do so may cause performance degradation of the TV or damage to the cable.
   • When arranging the remaining cable, refer to the figure above for the correct arrangement.
   • Take care not to subject the cable to any of the actions below. The One Connect Cable contains a power circuit. You could damage the cable and subject yourself to an electric shock.
   • Handle the One Connect carefully. It is heavy.

Mounting the TV on a wall

If you mount this TV on a wall, follow the instructions exactly as set out by the manufacturer. If it is not correctly mounted, the TV may slide or fall and cause serious injury to a child or adult and serious damage to the TV.

• Refer to the installation manual included with the Samsung wall mount kit.
• Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you choose to install the wall mount on your own.
• You can install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to surfaces other than plaster board, contact your nearest dealer for additional information. If you install the TV on a ceiling or slanted wall, it may fall and result in severe personal injury.

Do not install your wall mount kit while your TV is turned on. This may result in personal injury from electric shock.

• Be sure to use only the screws provided with the product. (Otherwise, it may cause damage to the TV or the wall mounted TV may fall from the wall.)
• Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents.
• Samsung is not liable for product damage or personal injury when a non-specified wall mount is used or when the consumer fails to follow the product installation instructions.

Providing proper ventilation for your TV

When you install your TV and One Connect, maintain a distance of at least 4 inches (10 cm) between the TV and One Connect with other objects (walls, cabinet sides, etc.) to ensure proper ventilation. Failing to maintain proper ventilation may result in a fire or a problem with the product caused by an increase in its internal temperature.

• When you install your TV with a stand or a wall mount, we strongly recommend you use parts provided by Samsung Electronics only. Using parts provided by another manufacturer may cause difficulties with the product or result in injury caused by the product falling.

Safety Precaution: Securing the TV to the wall to prevent falling

Caution : Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not hang on or destabilize the TV. This action may cause the TV to tip over, causing serious injuries or death. Follow all safety precautions provided in the Safety Flyer included with your TV. For added stability and safety, you can purchase and install the anti-tip device as described on the next page.

WARNING : Never place a television set in an unstable location. The television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

• Always use cabinets or stands or mounting methods recommended by Samsung.
• Always use furniture that can safely support the television set.
• Always ensure the television set is not overhanging the edge of the supporting furniture.
• Always educate children about the dangers of climbing on furniture to reach the television set or its controls.
• Always route cords and cables connected to your television so they cannot be tripped over, pulled or grabbed.
• Never place a television set in an unstable location.
• Never place the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.
• Never place the television set on cloth or other materials that may be located between the television set and supporting furniture.
• Never place items that might tempt children to climb, such as toys and remote controls, on the top of the television or furniture on which the television is placed.

If the existing television set is going to be retained and relocated, the same considerations as above should be applied.

• When installed on a stand, the display of this product is tilted slightly backward and its angle cannot be adjusted.
• If any object is placed on the stand orthe floor is tilted, the product may fall over, which causes malfunction or personal injury.

Preventing the TV from falling

1. Using the appropriate screws, firmly fasten a set of brackets to the wall. Confirm that the screws are firmly attached to the wall. ­
   • You may need additional material such as wall anchors depending on the type of wall.
2. Using the appropriately sized screws, firmly fasten a set of brackets to the TV. ­
   • For the screw specifications, refer to “Screw” in the table on page 8.
3. Connect the brackets fixed to the TV and the brackets fixed to the wall with a durable, heavy-duty string, and then tie the string tightly.
   • Install the TV near the wall so that it does not fall backwards. ­
   • Connect the string so that the brackets fixed to the wall are at the same height as or lower than the brackets fixed to the TV.

Using Art Mode

You can use Art mode function to display image content such as artworks or photos when you are not watching TV in full screen mode.

• Press the button on the remote control to switch to TV mode or Art mode.
• Press the button in Art mode to switch to TV mode.
• To turn off the TV completely, press and hold the button on the remote control, or press the TV Controller button at the top left of the TV. ­
  • If you use a remote control other than the Samsung Smart Remote, the TV may not be turned off completely.
• In Art mode, the brightness and color tone of your TV are automatically adjusted depending on the ambient, and the TV can be automatically turned off. ­
  • The TV is set to turn off the screen automatically in a certain period of time after darkening the screen when the ambient light dims in Art mode.
• In Art mode, you can connect your mobile device to the TV using the SmartThings app on the mobile device to view photos on the mobile device. ­
  • This function may not be supported depending on the TV model or mobile device. ­
  • Supported features may differ depending on the version of the SmartThings app.

Viewing images

• The image on your TV may differ from the image above depending on the model and geographical area.

To view an image in Art mode, select one of the menus below. To switch to the sub menu where you can select images, press the Select button, one of the four directional buttons, or button in Art mode. Then, use the directional buttons on the remote control to move to desired image, and then press the Select button. Set appears at the top of the selected image, and you can view the selected image in Art mode.

• Recents
  You can manipulate the last selected images.

• Art Store
  You can go to Art Store to purchase various images. ­

  • The Art Store may not appear depending on the network connection status.

• My Collection
  You can view a list of artworks and photos that you set as Favorite in Favorites. You can also select the desired ones among the images saved on an external storage device or a mobile device and save them in My Photos. ­

  • In order to fetch the images from your mobile device, the SmartThings app must have been installed in your mobile device.

Viewing images by time

1. Use the directional buttons on the remote control to move to My Collection.

2. Use the directional buttons to move to Favorite or My Photos.
   To view the images on the mobile device connected via the USB or SmartThings app, select the desired images on the connected device and then save them into My Photos.

3. Use the directional buttons on the remote control to move to Options+ at the top of the screen.

4. Press the Select button when the Start Slideshow item appears.

5. Use the directional buttons on the remote control to select the time that images will be replaced, and then press the Select button.

Import images from an external storage device

1. Connect an external storage device that contains images to the TV.
2. Use the directional buttons on the remote control to move to My Collection, and then move to the connected external storage device.
3. Use the directional buttons on the remote control to move to Save to My Photos at the top of the screen, and then press the Select button.
4. Use the directional buttons on the remote control to move to an image, and then press the Select button.
   • You can select multiple images.
5. Use the directional buttons on the remote control to move to Save Selected at the top of the screen, and then press the Select button.
6. The selected image or images are saved in My Photos.
   • Recommended resolutions:1920 x1080 (16:9)

Buying images from Art Store

1. Use the directional buttons on the remote control to move to Art Store.
2. Use the directional buttons on the remote control to move to a topic, and press the Select button. You can select any subtopics or images on the screen. ­
   • The entry path may differ by each topic.
3. Use the directional buttons on the remote control to move to an image, and press the Select button.
4. Use the directional buttons on the remote control to move to Options+ at the top of the screen, and then select Get Trial Membership or Buy to buy the selected image. ­
   • Displays Get Trial Membership if you have not joined The Art Store Membership.
5. Use the directional buttons on the remote control to select payment methods, and then press the Select button.
6. Follow the on-screen instructions to procedure payment.

Subscribing to The Art Store Membership
When you subscribe to The Art Store Membership, you can use Art Store unlimitedly and enjoy various art works by replacing them with new ones according to your preferences.

1. Use the directional buttons on the remote control to move to Art Store.
2. Use the directional buttons on the remote control to move to Membership.
3. Follow the on-screen instructions to enter your membership information.

Setting the style of the selected image

• The image on your TV may differ from the image above depending on the model and geographical area.

Use the directional buttons on the remote control to move to Options+ at the top of the screen. You can use the following menus:

• Details
  You can find more information about the image.

• Photo Filter
  You can apply the selected filter’s effect to the image according to your preferences. ­

  • This function is only available for saved images on My Photos.

• Matte
  You can apply various border styles and colors to the image according to your preferences. ­

  • This function is only available for saved images on My Photos.

• Favorite
  You can set (or not set) an image that you prefer as a favorite item by pressing the Select button on the remote control. You can view a list of items set as your favorites in My Collection > Favorites. ­

  • Favorite: Not set as a favorite. ­
  • Favorite: Set as a favorite.

Apply a border style and a color to an image

1. Using the directional buttons on the remote control to move to the image whose border style and color you want to change, move to Options+ at the top of the screen, and then select Matte.
2. Use the directional buttons on the remote control to select the border style and color that you want.
3. Change the border style and color, and then press the Select button to move the focus to the image.
   • ­If you change only the border style, change the border style and then press the Select button to save the selected border style.
4. To save the selected border style and color, press the Select button again. ­
   • If you press the button to exit, the border style and color you changed are not saved.

Setting up Art mode

In Art mode, use the directional buttons on the remote control to move to the Settings menu item at the bottom. You can adjust the following functions:

• Brightness
  Use the directional buttons on the remote control to move to Modify at the top, and then press the Select button. In the next screen, adjust the picture brightness. After selecting the desired settings, press the Select button on the remote control. ­

  • To immediately set Brightness while enjoying Art mode, press the button on the remote control.

• Sleep After
  If no motion is detected around the TV for the set time, the TV turns off automatically. Use the directional buttons on the remote control to move to the top items. After selecting the desired time, press the Select button on the remote control.

• Night Mode
  When this function is turned on, the TV turns off automatically if no light is detected around the TV. Use the directional buttons on the remote control to move to the top items, and then turn this function on or off.

Remove images from My Collection
You can remove the saved images from My Collection.

1. Use the directional buttons on the remote control to move to My Collection.
2. Use the directional buttons on the remote control to move to Favorites or My Photos.
3. Use the directional buttons on the remote control to move to Options+ at the top of the screen.
4. Move the focus to Remove, and then press the Select button on the remote control.
5. Use the directional buttons on the remote control to move to an image, and then press the Select button. ­
   • You can select multiple images.
6. Use the directional buttons on the remote control to move to Remove Selected at the top of the screen, and then press the Select button.

Using Art mode with the SmartThings app

Once you have installed the SmartThings app on your mobile device, you can use the following functions: You can download the SmartThings app from Google Play Store, Samsung Apps, or the App Store. ­

– The features or terminology may vary depending on the version of the SmartThings app. ­
– On tablet devices, Art mode features may not be supported by the SmartThings app.

• Selecting images
• Subscribing to The Art Store Membership
• Creating Collage: Combine multiple images into one image.
• Applying border styles and colors to images
• Setting the brightness for Art mode
• Setting Sleep After: When no motion is detected for the time specified in Art mode, the TV turns off automatically.
• Setting Night Mode: Set The Frame to turn off automatically if no light is detected in the room.

The Samsung Smart Remote

About the Buttons on the Samsung Smart Remote

• The images, buttons, and functions of the Samsung Smart Remote may differ depending on the model.

Pairing the TV to the Samsung Smart Remote

Installing batteries into the Samsung Smart Remote

To install the batteries, push the rear cover open in the direction of the arrow at the bottom of the illustration, and then insert the batteries as shown in the figure. Make sure that the positive and negative ends are facing in the correct direction. Close the rear cover as shown.

• Alkaline batteries are recommended for longer battery life.

Initial Setup

When you turn on your TV for the first time, it immediately starts the Initial Setup. Follow the instructions displayed on the screen and configure the TV’s basic settings to suit your viewing environment.

• To perform the Initial Setup using the SmartThings app, you must connect your mobile device via Wi-Fi.

• If the pop-up for setup does not appear automatically in the SmartThings app on your mobile device, manually add
  the TV using Add Device on the dashboard of the SmartThings app, and then continue with the set up process.

• The SmartThings app is available for mobile devices running Android 6.0 or higher or iOS10 or higher.

• Noise may occur temporarily when the TV communicates with mobile devices.

• TV setup has been optimized for Landscape mode.

Using the TV Controller

You can turn on the TV with the TV Controller button at the top left of the TV, and then use the Control menu. The Control menu appears when the TV Controller button is pressed while the TV is On. For more information about its usage, refer to the figure below.

Troubleshooting and Maintenance

Troubleshooting

If the TV seems to have a problem, first review this list of possible problems and solutions. Alternatively, review the Troubleshooting or FAQ Section in the e-Manual. If none of the troubleshooting tips apply, please visit “www.samsung. com” and click Support or contact the Samsung service center listed on the back cover of this manual.

• For detailed information on troubleshooting, watch the troubleshooting videos at www.samsung.com/spsn.
• This TFT LED panel is made up of sub pixels which require sophisticated technology to produce. There may be, however, a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
• To keep your TV in optimum condition, upgrade to the latest software. Use the Update Now or Auto Update functions on the TV’s menu ( > Settings > Support > Software Update > Update Now or Auto Update).
• In Portrait Mode, some apps or external inputs may not support the full screen.

The TV won’t turn on.

• Make sure that the AC power cord is securely plugged in to the One Connect and the wall outlet.
• Make sure that the wall outlet is working and the power indicator at the top left of the TV is lit and glowing a solid red.
• Try pressing the TV Controller button at the top left of the TV to make sure that the problem is not with the remote control. If the TV turns on, refer to “The remote control does not work” below.

There is no picture/video/sound, or a distorted picture/video/sound from an external device, or “Weak orNo Signal” is displayed on the TV, or you cannot find a channel.

• Perform a TV self diagnosis to determine if the problem is caused by the TV orthe device ( > Settings > Support > Device Care > Self Diagnosis > Picture Test or Sound Test).
• If the test results are normal, make sure the connection to the device is correct and that all cables are fully inserted.
• Remove and reconnect all cables connected to the TV and the external devices. Try new cables if possible and confirm that the correct input source has been selected ( > Source).
• Reboot the connected devices by unplugging each device’s power cord and then plugging it in again. If the issue persists, refer to the connection guide in the user manual of the connected device.
• If you are not using a cable box or satellite box, and your TV is receiving TV signals from an antenna or a cable wall connector, run Auto Program to search for channels ( > Settings > Broadcasting > Auto Program).

The remote control does not work.

• Check if the power indicator at the top left of the TV blinks when you press the remote’s Power button. If it does not, replace the remote control’s batteries.
• Make sure that the batteries are installed with their poles (+/­) in the correct direction.
• Try pointing the remote directly at the TV from 5 ft. to 6 ft. (1.5-1.8 m) away.
• If your TV came with a Samsung Smart Remote (Bluetooth Remote), make sure to pair the remote to the TV.

The cable box or satellite box remote control doesn’t turn the TV on or off or adjust the volume.

• Program the cable box or satellite box remote control to operate the TV. Refer to the cable box or satellite box user manual for the SAMSUNG TV code.

The TV settings are lost after 5 minutes.

• The TV is in the Retail Mode. Change the Usage Mode in the System Manager Menu to Home Mode ( > Settings > General > System Manager > Usage Mode > Home Mode).

Intermittent Wi-Fi

• Make sure the TV has a network connection ( > Settings > General > Network > Network Status).

• Make sure the Wi-Fi password is entered correctly.

• Check the distance between the TV and the modem or access point. The distance should not exceed 50 ft (15.2 m).

• Reduce interference by not using or turning off wireless devices. Also, verify that there are no obstacles between the TV and the modem or access point. (The Wi-Fi strength can be decreased by appliances, cordless phones, stone walls/fireplaces, etc.)

• Contact your Internet Service Provider (ISP) and ask them to reset your network circuit to re-register the MAC addresses of your new modem or access point and the TV.

Video Apps problems (YouTube etc)

• Change the DNS to 8.8.8.8. Select > Settings > General > Network > Network Status > IP Settings > DNS Setting > Enter manually > DNS Server > enter 8.8.8.8 > OK.
• Reset by selecting > Settings > Support > Device Care > Self Diagnosis > Reset Smart Hub.

Precautions when using Art mode

• The performance of the sensor may vary depending on the TV installation and operating environment. ­
  • The screen brightness and color tone may be affected depending on the color of the floor on which the TV stands. ­
  • If the area around the TV is too dark or bright, the screen brightness may be limited or the sensor may not work normally. ­
  • If the TV is installed too high or too low, the sensor may not work normally.
• Depending on the Auto Power Off function settings, the TV may turn off when there is no user input in Art mode, such as inputs from the remote control ( > Settings > General > Eco Solution > Auto Power Off).
• Home > Settings > General > System Manager > Time > Sleep Timer and Off Timer function does not work in Art mode.
• Home > Settings > General > System Manager > Auto Protection Time function does not work in Art mode.

What is Remote Support?

Samsung Remote Support service offers you one-on-one support with a Samsung Technician who can remotely:

• Diagnose your TV
• Adjust the TV settings for you
• Perform a factory reset on your TV
• Install recommended firmware updates

How does Remote Support work?

You can easily get Samsung Remote Support service for your TV.

1. Call the Samsung service center and ask for remote support.
2. Open the menu on your TV, and then go to the Support menu. (Home > Settings > Support)
3. Select Remote Management, then read and agree to the service agreements. When the PIN screen appears, provide the PIN number to the technician.
4. The technician will then access your TV.

Eco Sensor and screen brightness

Eco Sensor adjusts the brightness of the TV automatically. This feature measures the light in your room and optimizes the brightness of the TV automatically to reduce power consumption. If you want to turn this off, go to Home > Settings > General > Eco Solution > Ambient Light Detection.

• If the screen is too dark while you are watching TV in a dark environment, it may be due to the Ambient Light Detection function.
• The eco sensor is located at the top left of the TV. Do not block the sensor with any object. This can decrease picture brightness.

Caring for the TV

• If a sticker was attached to the TV screen, some debris can remain after you remove the sticker. Please clean the debris off before watching TV.
• The exterior and screen of the TV can get scratched during cleaning. Be sure to wipe the exterior and screen carefully using a soft cloth to prevent scratches.
• Do not spray water or any liquid directly onto the TV. Any liquid that goes into the product may cause a failure, fire, or electric shock.
• To clean the screen, turn off the TV, then gently wipe away smudges and fingerprints on the panel with a micro-fiber cloth. Clean the body or panel of the TV with a micro-fiber cloth dampened with a small amount of water. After that, remove the moisture with a dry cloth. While cleaning, do not apply strong force to the surface of the panel because it can damage the panel. Never use flammable liquids (benzene, thinner, etc.) or a cleaning agent. For stubborn smudges, spray a small amount of screen cleaner on a micro-fiber cloth, and then use the cloth to wipe away the smudges.

Specifications and Other Information

Specifications

Environmental Considerations

Notes

• Design and specifications are subject to change without prior notice.
• This device is a Class B digital apparatus.
• For information about the power supply, and more information about power consumption, refer to the information on the label attached to the product. ­
  • On One Connect models, the label is attached to the bottom of the One Connect. ­
  • On most models, the label is attached to the back of the TV. (On some models, the label is inside the cover terminal.)
• Your TV and its accessories may look different than the product images presented in this manual, depending on the model.
• All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions before installing your TV. Not responsible for typographical or printed errors.

Decreasing power consumption

When you shut the TV off, it enters Standby mode. In Standby mode, it continues to draw a small amount of power. To decrease power consumption, unplug the power cord when you don’t intend to use the TV for a long time.

Dimensions

Licenses

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Contact SAMSUNG WORLD WIDE

If you have any questions or comments relating to Samsung products, please contact the Samsung service center.

www.samsung.com/ca/support (English)
www.samsung.com/ca_fr/support (French)
www.samsung.com/us/support

accessibility contact information in U.S.A. : accessibility@sea.samsung.com

Scan the QR code to view our helpful how-to videos
http://bit.ly/sk0fQN
Scan this QR code with your smart phone to see helpful videos.

If you experience issues, please do not take the TV back to the store.

In the United States of America, call us at 1-800-SAMSUNG (1-800-726-7864) or visit us at www.samsung.com or www.samsung.com/spsn for support and warranty service.

For more information, see “Troubleshooting” in this manual or “FAQ” in the e-Manual.

© 2020 Samsung Electronics Co., Ltd. All rights reserved.

Thank you for purchasing this Samsung product.
To receive more complete service, please register your product at www.samsung.com
Model____ Serial No.____
If you have any questions, please call us at 1-800-SAMSUNG (1-800-726-7864) for assistance.

FAQS

Is it for 220V current?

This Samsung TV model is intended for use in the US and will only support 120V.

how much flea is it?

32 inch

What is the difference between Anynet+ and Anynet+ (HDMI-CEC)?

Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote.

What is the difference between Anynet+ and Easy Control?

Anynet+ allows you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote. Easy Control allows you to control all connected Samsung devices that support Easy Control with your Samsung TV’s remote.

What is the difference between Anynet+(HDMI-CEC) and Easy Control?

Anynet+(HDMI-CEC) allows you to control all connected Samsung devices that support Anynet+(HDMI-CEC) with your Samsung TV’s remote. Easy Control allows you to control all connected Samsung devices that support Easy Control with your Samsung TV’s remote.

Is Samsung Frame TV worth buying?

The Samsung Frame TV is  ideal for people who want the option of having a TV be the focus of a room when it’s on but fade into the room when it isn’t being watched. This can be especially vital for small-space living or open-concept homes.

Are Samsung frame TVs 4K?

The Samsung Frame TV is a 4K TV  that shows high-quality artwork and photos when you aren’t using it, and stunning video and TV when you’re watching your favorite movies and shows.

Will there be a 2022 Samsung Frame TV?

The Samsung “The Frame” 2022 model is a new-and-improved version of the top-rated Samsung QLED smart 4K TV  — the set that doubles as customizable wall art. “The Frame” 2022 features a brand-new matte display.

How long will Samsung Frame TV last?

Samsung TVs can last around  4 to 7 years  with constant usage. This includes having it set on the highest brightness, and almost always being on. If you care for your TV properly it can last you much longer than this time frame.

What is the point of a frame TV?

The Frame TV is an extremely slim TV that includes a box that runs everything, allowing the TV itself to appear flush to the wall without any ports or wires.

Does Samsung frame come with Netflix?

Like any other Samsung device, the interface is intuitive and simply laid out. You can access all of your favourite streaming services without needing an external streaming device.  That includes, but is not limited to, Netflix , Prime Video, Now TV, Disney+ and even catch up services like BBC iPlayer.

Can the Samsung Frame TV be a mirror?

Now you can add to that –  Mirror when it’s off. When you want quiet enjoyment in your home you can enjoy Samsung The Frame in “quiet mode” which is a beautiful reflective mirror that bounces light around a room and opens up every interior.

What TV is better than the frame?

The  LG CX OLED  is a significantly better TV than the Samsung The Frame 2020. Being an OLED TV, the LG can produce perfect blacks, which the Frame 2020 can’t do. The LG has a faster response time, wider viewing angles, and its reflection handling is much better too.

Do frame TVs burn out?

The power consumption in Art Mode is roughly about 30% of TV Mode depending on surrounding colours and an average living room brightness of 50 lux. The Frame is designed to withstand prolong display of art and photos. Therefore,  the panels used in The Frame are not prone to screen burn out issues as other TVs.

Does the Samsung frame TV have a camera?

You would look at the top part of the bezel (the frame) and notice a slight difference in it, which is where the camera is. It will appear just as a camera on a laptop or tablet screen would.

Is the frame TV Wireless?

You also get  mobile-to-TV mirroring, which can be used to wirelessly display content from your mobile device directly onto the Frame TV, no internet connection required.

What is the price of Samsung frame TV?

Samsung 55 Inch QLED Ultra HD (4K) TV (The Frame QA55LS03RAKXXL) Price in India. Samsung 55 Inch QLED Ultra HD (4K) TV (The Frame QA55LS03RAKXXL) price in India starts from  ₹ 84,999. The lowest price of Samsung 55 Inch QLED Ultra HD (4K) TV (The Frame QA55LS03RAKXXL) is ₹ 84,999 at Flipkart on 11th August 2022.

How does the Samsung frame TV get power?

The cable carries both your video signals and power to the TV , so you don’t need to have an electric outlet behind the television. The Frame TVs come with a charcoal bezel

Can a Samsung TV be hacked?

As with most technological devices,  your Samsung TV can unfortunately be hacked. There are some warning signs to look out for if you think your Samsung TV has been hacked, as well as some ways to prevent it from happening in the first place.

What is special about Samsung frame TV?

The Samsung Frame TV is a 4K TV that  shows high-quality artwork and photos when you aren’t using it, and stunning video and TV when you’re watching your favorite movies and shows. This picture frame TV has all the elements you love about impressive artwork paired with the hard-working technology you need in a smart TV.

How do you tell if your TV has a hidden camera?

Some newer smart TVs are equipped with a built-in camera, but many are not. It really depends on the model.  If your smart TV has facial recognition or video chat features, chances are it has a camera. If it does, you should be able to find the lens if you look closely at the edges of the screen.

Does Samsung TV listen to you?

Yes, smart TVs listen. They are not the only culprits, however. Your laptops, smartphones, tablets, speakers and more can gather data about you. They compile your viewing and browsing habits to learn more about you and target you with ads and content.

Can a TV screen be used as a camera?

A camera needs a lens to work. Screen has no lens in front of it so  cannot be used as a camera.

Do smart TVs have microphones?

Most smart TVs have cameras, a microphone , and a file system. If a cybercriminal gains access to your smart TV, which is likely connected to the internet, it would mean an attacker can see you through your camera, listen to your conversations, and steal your data.

VIDEO

www.samsung.com

References

• Samsung US | Mobile | TV | Home Electronics | Home Appliances | Samsung US
• P65Warnings.ca.gov
• Galaxy S24 Ultra | Appareil photo et couleurs | Samsung Canada
• Samsung Canada | Mobile | TV | Home Appliances
• Samsung US | Mobile | TV | Home Electronics | Home Appliances | Samsung US

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>