anko Combo Walker User Manual
- June 7, 2024
- Anko
Table of Contents
anko Combo Walker
WARNING
Read the instructions carefully before use and keep them for future
reference. The child may be hurt if you do not follow these instructions.
Adult assembly required.
WARNING — Never leave the child unattended. Always keep the child in view
while in a walker.
WARNING — The child will be able to reach further and move rapidly when in the
baby’s walking frame.
-
Prevent access to stairs, steps, and uneven surfaces.
-
Use only on flat surfaces free of objects that could cause the walker to tip over.
-
Guard all fires, heating, and cooking appliances.
-
Remove hot liquids, electrical flexes, and other potential hazards from reach.
-
Prevent collisions with glass in doors, windows, and furniture.
-
Do not use the baby walking frame if any components are broken or missing.
-
This baby walking frame should be used only for short periods of time
(e.g. 20 min). -
This baby walking frame is intended to be used by children who can sit
unaided, approximately from 6 months (seated stage). It is not intended for children weighing more than 12 kg. -
Do not use replacement parts other than those approved by the manufacturer or distributor.
WARNING— STAIR HAZARD
- Avoid serious injury or death.
- Block stairs/ steps securely before using a walker.
CARE & MAINTENANCE
For Seat Pad:
Cold delicate machine wash. Do not bleach. Maybe tumble dried warm. Do not
iron. Do not dry clean. Dry thoroughly before re-use or storage. Not intended
for repeated washing. For walker: Wipe with a damp cloth and dry immediately
with a soft clean cloth. Do not use abrasive pads, bleach, or strong household
cleanser. Damage may result. NOTE: Clean friction strips regularly with a damp
cloth.
WARNING
BATTERY INFORMATION
- Batteries are to be inserted with the correct polarity.
- Do not mix different types of batteries or new and used batteries.
- Non-rechargeable batteries are not to be recharged.
- Rechargeable batteries are only to be charged under adult supervision.
- Rechargeable batteries are to be removed from the toy before being charged.
- The supply terminals are not to be short-circuited.
- Remove batteries from the unit when not in use for an extended time or when batteries become exhausted.
- Dispose of batteries responsibly. Do not dispose of it in the fire.
PARTS
Assembly diagram
To assemble the frame
To
assemble the seat unit
To assemble the seat pad
Note:
Make sure all 8 tabs are securely fastened. 6
To attach the seat onto the frame
To adjust the seat height
Buckle up to adjust to the upper position
Battery installation
To assemble the toy tray
To attach toy tray on the walker
Using the toy tray
2-level
volume adjustment
Converting to push walker
- Push the button and push forward the pedal music tray to the end
- Remove the seat unit support
- Rotate the handle
- A child can push the walker forward
Speed adjustment
Push tabs on
the rear wheels forward to reduce the speed (recommended when using as a push
walker).
Pull tabs backward to restore to normal speed.
To fold the walker
- Press the button and take out the front leg
- Fold the front leg
- Fold the top tray
IMPORTED BY
© KMART AUSTRALIA LIMITED
ANKO, KIDS&CO, AND BABY SOLUTIONS® ARE TRADEMARKS OF KMART AUSTRALIA LIMITED THEY ARE USED IN NEW ZEALAND BY KMART NZ HOLDINGS LIMITED TRADING AS KMART IN NEW ZEALAND.
KMART AUSTRALIA – 690 SPRINGVALE ROAD, MULGRAVE, VIC 3170 AUSTRALIA.
KMART NEW ZEALAND – REGIONAL OFFICE C/O KMART PAPATOETOE STORE,
HUNTERS PLAZA, GREAT SOUTH ROAD, PAPATOETOE, AUCKLAND, NEW ZEALAND.
Keycode: 42-767-381
MADE IN CHINA
Documents / Resources
| anko
Combo
Walker
[pdf] User Manual
Combo Walker
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>