Comsol 10W Wireless fast charging Pad Black User Manual
- June 7, 2024
- comsol
Table of Contents
Model: WFC10
10W Wireless Fast Charging Pad
User Manual v1.2
Qi Certified
The certification program ensures this charger has passed rigorous tests to
guarantee safety, compatibility and energy efficiency.
Compatibility
*Compatible with Qi-enabled devices including**
• iPhone Xs/Xs Max
• iPhone XrD<
• iPhone 8/8 Plus
• Samsung S9/S9+
• Samsung S8/S8+
• Samsung Note 9/8/5
• Huawei Mate 20 Pro
• Google Pixel 3/3 XL
• Sony Xperia XZ2
• Nokia 8 Sirocco
• LG G7 ThinQ
• LG V30+
Features
• 360° rotation to change from flat surface to angled surface
• Supports 10W wireless fast charging for compatible devices such as Samsung
Galaxy S9/59+, S8/S8+, Note 9/8, Google Pixel 3/3XL
• Supports 5W standard wireless charging for all Qi-enabled devices
• No need to remove your protective case. Works with most cases up to 3mm
thick
• LED indicator to show charging status
• Smart IC enables energy-saving mode when device is fully charged
• Full safety protection for your devices with Qi-certified temperature
control, strict voltage regulation & short circuit protection
• Includes 1.5m micro USB cable to connect charging pad to USB wall charger
(USB wall charger not included)
- Check with device manufacturer for Qi wireless compatibility • When connected to a Quick Charge 2.0 or 3.0 wall charger (not included)
Wireless Charger Operation
• Using the included micro USB cable, connect the wireless charging pad to a
USB wall charger (USB wall charger not included)
• It is recommended to use original or reputable 3rd party-branded USB wall
chargers. For faster charging times it is recommended to use a USB wall
charger with a minimum of 2A output
• When connected to the USB charger, the green LED will be on for 3 seconds to
indicate the charging pad is powered on and in stand-by mode
• Place your Qi enabled wireless phone on the charging pad and your phone
should start charging automatically
• The LED will flash green to indicate charging
• If your phone does not start charging, move your phone until the correct
position is found and your phone starts charging
• When your phone is fully charged, the Smart IC enables energy-saving trickle
charge mode
Please Note To achieve 10W fast charging for Android devices, the charging pad
needs to be connected to a Quick Charge 2.0 or 3.0 wall charger (not included)
Specifications
• Wireless Standard: WPC/Qi (v1.2.4)
• Quantity of Wireless Charging Coils: One Coil
• Input: DC 5V 2A or DC 9V 2A
• Output: 5W / 10W (Max)
• Working Frequency: 110 to 205KHz
• Charging Distance: 3 to 8mm
• Charging Efficiency: >72%
• Dimensions: 77 x 77 x 26.5mm
• Weight: 100g
Important Safety Instructions
• Only use original or reputable third-party chargers and cables
• Do not get wet to avoid causing short circuit damage and leakage
• Do not use in extreme hot, humid or corrosive environments to avoid short
circuit damage and leakage
• Do not place too close to magnetic strip or chip ID card to avoid magnetic
failure
• Do not place within 20cm of implantable medical devices (pacemaker, cochlear
implant etc.) to avoid potential interference
• Do not clean with harmful chemicals or detergents
• Misuse, dropping or excessive force may cause damage to the charging pad
Please Note : When wirelessly charging a device, the wireless charger and
your device may feel warm. This is a normal operating condition and should not
be cause for concern.
iPhone is a trademark of Apple Inc., registered in the U.S. and other
countries. The ‘Or Symbol is a trademark of the Wireless Power Consortium.
Android is a trademark of Google
www.mycomsol.com.au
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>