Trinity Pro 36” Locker Cabinet Owner’s Manual

OWNER’S MANUAL TRINITY PRO 36” LOCKER CABINET
Model # TSNPBK-0610
https://sj83t.app.goo.gl/zYcE

Important
FOR QUICK & EASY 3D ASSEMBLY INSTRUCTIONS

Intelligent Instruction

PARTS LIST

Your TRINITY PRO 36“ Locker Cabinet should include the following parts. Please inspect box contents to ensure you have received all components. If you are missing any parts, need assistance with assembly, or have questions, please contact TRINITY Customer Service: 800.985.5506 or customerservice@trinityii.com.  Parts can also be requested online at www.trinityii.com (Help & More, Contact Us). No tools required for assembly.

**ASSEMBLY INSTRUCTIONS

**

STEP 1

Lay CABINET BODY (A) gently on its back. Two people are needed, do not attempt this alone. Screw FEET LEVELER (D) fully into each pre-installed nut on four corners of cabinet bottom. Stand cabinet right side up. Move it to desired location. Adjust FEET LEVELER (D) as needed to ensure your cabinet is level and stable.

STEP 2
Attach SHELF SUPPORT (C) by hooking it over the position tab at the desired height. Make sure all four SHELF SUPPORTS (C) are at the same level. Tilt SHELF (B) diagonally to move it inside the cabinet. Place SHELF (B) on top of all four SHELF SUPPORTS (C). Repeat above to install the remaining shelves.

USAGE INSTRUCTIONS

OPEN AND CLOSE DOOR

Lift up door handle to release it from the slot on handle base plate, rotate it forward, and pull it to open door. Close the door by making sure the ends of the door bar is pushed against the stopper plate both on top and bottom. Rotate the door handle against the door and slide it into the slot on the door handle base plate to keep door closed. Note: To lock the door you need to buy a padlock with shackle diameter no larger than 9/32” (7mm). Put the shackle through the holes on the door handle and handle base plate to lock

SHELF ADJUSTMENT

Lift up door handle to release it from slot on handle base plate, rotate it forward and pull it to open door. Close door by making sure ends of door bar is pushed against the stopper plate both on top and bottom. Rotate the door handle against door and slide into the slot on door handle base plate to keep door closed. Note: To lock the door you need to buy a padlock with a shackle diameter no larger than 9/32” (7mm). Put the shackle through the holes on door handle and handle base plate to lock the door.

SHELF ADJUSTMENT

Ensure all items have been removed from shelf. To adjust shelf height position, take shelf out of cabinet, re-attach shelf supports to position tabs at desired height. Tilt shelf diagonally to move it inside cabinet. Place shelf on top of all shelf supports.

SERVICE PARTS LIST – TSNPBK-0610
TRINITY Customer Service provides the following replacement parts:

| Part Number| Description| | Part Number| Description
---|---|---|---|---|---
1)| PBK-18-020-3624| Cabinet Body| 9)| XSV-02-017-0001| Shelf Support
2)| XSV-09-009-0004| Door Hinge| 10)| XSV-01-010-0616| Handle Screw
3)| XBS-02-030-0002| Right Handle Base Plate| 11)| XBS-02-030-0001| Left Handle Base Plate
4)| XBS-05-025-0720| Handle| 12)| XSV-01-010-0408| Door Bar Bracket Screw
5)| XBS-02-029-0001| Door Bar Bracket| 13)| XBK-02-028-0001| Plastic Spacer
6)| XBS-05-026-2875| Door Bar| 14)| XBS-02-027-0001| Door Bar Stopper
7)| XBS-98-012-1662| Feet Leveler| 15)| XSV-01-027-0408| Stopper Screw
8)| PBK-03-073-2235| Shelf| | |

WARNINGS

1. Read and understand all instructions. Failure to follow all instructions may result in injury and/or damage.
2. The warnings, cautions, and instructions discussed in this manual cannot cover all possible conditions or situations that may occur. The user must always be aware of their environment and ensure that they use the product in a safe and responsible manner.
3. Do NOT modify the product in any way. Unauthorized modification may impair the function and/or safety of the product, and may affect the life of the product.
4. Check for damaged parts. Before using this product, carefully check that all parts are in good condition and that the product will operate properly and perform its intended function. Check for damaged parts and any other conditions that may affect the operation of this product. Replace damaged or worn parts, and never use this product with a damaged part.
5. Do NOT overload the product.

CARE AND MAINTENANCE

• Avoid harsh, abrasive cleaners, and other corrosive chemicals.
• Do not use scouring pad for cleaning.
• This item is not certified for outdoor use.

PRODUCT REGISTRATION

Thank you for purchasing a TRINITY PRO 36” Locker Cabinet. In order to register your product and receive streamlined customer service, please fill out the following product  Registration Form and (1) fax the form to 310.347.4134 (2) complete the Product Registration Form online at www.trinityii.com or (3) scan and email the form to  customerservice@trinityii.com. Include a copy of your original receipt with your submission.
First Name:____ Last Name:_____
Address:

City:____State:__ Zip Code:
Email Address:___ Phone:

Product Model #: TSNPBK-0610,  Purchase Date:____/_____/__
Location of Purchase:____
Please rate the importance of each feature (1=least important; 10=most important)
Quality__ Price__ Size/Capacity__ Appearance__ Other____
How did you hear about our product?
Magazine Ad Catalog Salesperson Word of Mouth
Internet Store Display Other
Marital Status:
Single
Married
Household Income:
Below $50,000 $50,000 -$150,000 $150,000+
Education:  High School College Graduate School
Primary Residence:
Own Rent
Comments/Suggestions:

1 YEAR LIMITED WARRANTY

TRINITY PRO 36” Locker Cabinet
Model # TSNPBK-0610

Trinity International Industries (“Trinity”) warrants to the original consumer purchaser (“Purchaser”) of the TRINITY PRO 36” Locker Cabinet (“Product”) that each Product shall be free from defects in workmanship and materials for a period of 1 year from the date of original purchase. Trinity’s obligation under this warranty shall be limited to repair or replacement of, or adequate compensation for the Product which shall not be greater than the amount of the purchase price of the Product, at the option of Trinity,  during the warranty period. All replaced parts and Products become the property of Trinity and must be returned to Trinity.  This warranty excludes normal wear and tear of the  Product and its parts or components, and damage arising from any of the following: negligent use or misuse of the Product, use contrary to this User’s Manual, or alteration by anyone other than Trinity. The warranty period of 1 year shall not be extended or renewed by the repair or replacement of, or compensation for, the Product. Any warranty implied by applicable law is limited in duration to one year from the date of purchase and is subject to the same conditions and limitations as is provided for our express warranty. Except as set forth herein, and to the extent of applicable there are no warranties on this Product either express or implied, and Trinity disclaims all warranties including, but not limited to, any implied warranties of merchantability, infringement or fitness for a particular purpose. No warranty or guarantee given by any person, firm, or corporation with respect to this product shall be binding on Trinity. If your product is defective or otherwise requires service or parts, please call TRINITY Customer Service toll-free at 800-985-5506, between 5:00 a.m. and 5:00 p.m., PST. Please tell us which model you purchased, the date of the purchase, and the problem with your Product. A copy of your original purchase receipt must accompany your service request.

LIMITATION OF REMEDIES AND LIABILITY
Trinity (and its employees, officers, members, managers, affiliates, and assigns) shall not be liable for any incidental, consequential, special, indirect, remote, special, or punitive damages for breach of any warranty, express or implied, including, but not limited to, lost profits, lost savings, loss of anticipated benefits and attorneys’ fees, which arise out of the purchase, use or inability to use the Product,  whether arising out of contract, negligence, strict tort, product liability, or any other legal theory on which a claim is based. As noted above, to the extent damages are allowed by our express warranty or by applicable law, those damages may not exceed the purchase price paid for the Product. Without limiting the foregoing Purchaser assumes all risk and liability for loss, damage or injury to Purchaser and Purchaser’s property and to others and their property arising out of the use, misuse, or inability to use this  Product. This limited warranty shall not extend to anyone other than the original purchaser of this product, is nontransferable and states your exclusive remedy. Some states do not allow the exclusion or limitation of incidental, consequential, special, or punitive damages, so the above limitation or exclusion may not apply to you. The above warranty gives you specific legal rights, and you may have other rights which vary from state to state.

QUESTIONS? NEED PARTS?
WE ARE HERE TO HELP!
Please feel free to contact us. There are no questions too small, or any problems too big. We’re committed to providing our customers with the highest level of service. TRINITY Customer Service
TEL: 800.985.5506 FAX: 310.347.4134
EMAIL: customerservice@trinityii.com
Monday  through Friday 5:00 AM – 5:00 PM (PST)
www.trinityii.com

Important / Important / Importante
FOR QUICK & EASY 3D ASSEMBLY INSTRUCTIONS
POUR DES DIRECTIVES D’ASSEMBLAGE 3D RAPIDES ET FACILES
PARA INSTRUCCIONES DE ENSAMBLAJE RÁPIDAS Y SENCILLAS EN 3D

References

• TRINITY - Everything In its Place®

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>