BANG and OLUFSEN 11508 Beosound Stage Instructions

: August 20, 2024
: Bang and Olufsen

Table of Contents

11508 Beosound Stage
Important safety instructions
Bang & Olufsen App
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Beosound Stage
Important

11508 Beosound Stage

For additional information, see (link provides content with regulatory conformance guidelines):
www.bang-olufsen.com/guides/important_information
Bang og Olufsen Allé 1, 7600 Struer, Denmark

Important safety instructions

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliﬁers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not ﬁt into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories speciﬁed by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table speciﬁed by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

WARNING: To reduce the risk of ﬁre or electric shock, do not expose this appliance to rain or moisture. Do not expose this equipment to dripping or splashing and ensure that no objects ﬁlled with liquids, such as vases, are placed on the equipment.
WARNING: The mains plug/appliance coupler is used as disconnect device, the disconnect device shall remain readily operable.

This lightning ﬂash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

(For class II apparatus only)
This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.

Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualiﬁed personnel.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance.

No naked ﬂame sources, such as lighted candles should be placed on the product.
Follow instructions to ensure correct and safe installation and interconnection of equipment in multimedia systems.
Electrical and electronic equipment, parts and batteries marked with this symbol must not be disposed of with normal household wastage, it must be collected and disposed of separately to protect the environment.
Your Bang & Olufsen retailer will advise you of the correct way of disposal in your country.
For indoor use only.
Hereby, Bang & Olufsen declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The declaration of conformity may be consulted at www.bang- olufsen.com/support/beosound-stage.
To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.
Important!

Avoid placing the product in direct sunlight or direct artificial light, such as a spotlight.
Make sure that the product is set up, placed and connected in accordance with the instructions,
Place your product ona firm surface or stand where you want it placed permanently. Use Bang & Olufsen approved stands and wall brackets only!
Do not place any items on top of your product.
Do not subject the product to high humidity, rain or sources of heat.
The product is intended for indoor use in dry, domestic environments only. Use within a temperature range of 10– 40°C (50–105°F).
Leave enough space around the product for adequate ventilation.
Do not connect any of the products in your system to the mains, until you have connected all the cables.
Do not attempt to open the product. Leave such operations to qualiﬁed service personnel.
The supplied plug and mains cord are specially designed for the product. Do not change the plug and if the mains cord is damaged, you must buy a new one from your Bang & Olufsen retailer.

Using a very noisy AC supply may trigger false touch operation in very rare situations.
WARNING: To reduce the risk of ﬁre or electric shock, do not expose this appliance to rain or moisture. Do not expose this equipment to dripping or splashing and ensure that no objects ﬁlled with liquids, such as vases, are placed on the equipment.

Hereby, Bang & Olufsen a/s declares that the radio equipment type Beosound Stage is in compliance with Directive 2014/53/EU.
The full Declaration of Conformity can be found at the following web site: www.bang-olufsen.com/support/beosound-stage.
Compliance with 2014/53/EU Radio Equipment Directive (RED) In accordance with Article 10.8(a) and 10.8(b) of the RED, the following table provides information on the frequency bands used and the maximum RF transmit power of the product for sale in the EU:

Wireless Technoolgies	Frequency range (MHz)	Max. Transmit Power (dBm)
BT	2402~2480MHz	≤10 dBm
WiFi 2.4G	2412~2472 MHz	≤20 dBm
WiFi 5G	5150~5725 MHz	≤20 dBm

The product ﬁrmware is available for download from the Bang & Olufsen app.
The product to be sold in all European Union member and EFTA countries.
5.15~5.35 GHz band is restricted to indoor operations only in the following countries: AT, BE, BG, CZ, DK, EE, FR, DE, IS, IE, IT, EL, ES, CY, LV, LI, LT, LU, HU, MT, NL, NO, PL, PT, RO, SI, SK, TR, FI, SE, CH, UK, HR.
FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.
Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user iS encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver,
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC RADIATION EXPOSURE STATEMENT
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with minimum distance 20cm between the radiator & your body.
5,150- 5,350 MHz is restricted to indoor use only.
CAN ICES-3 (B)/NMB-3(B)

IC warning
This device complies with Industry Canada’s licence- exempt RSSs.
Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
Use of the Works with Apple badge means that an accessory has been designed to work speciﬁcally with the technology identiﬁed in the badge and has been certiﬁed by the developer to meet Apple performance standards The product complies with the PSTI Act 2022 requirements.
“The terms HDMI, HDMI High-Deﬁnition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.”
The Bluetooth word mark and logos are

Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, Dolby Atmos, and the double-D symbol are trademarks of Dolby Laboratories.
Declaration of the Presence Condition of the Restricted Substances Marking

Equipment name :Beosound Stage Type designation (Type)

Unit| Restricted substances and its chemical symbols
Lead
(Pb)| Mercury
(Hg)| Cadmium
(Cd)| Hexavalent
chromium
(Cr+6)| Polybrominated
biphenyls
(PBB)| Polybrominated
diphenyl ethers
(PBDE)
| –| 0| 0| 0| 0| 0
| –| 0| 0| 0| 0| 0
| 0| 0| 0| 0| 0| 0
| 0| 0| 0| 0| 0| 0
| 0| 0| 0| 0| 0| 0
| 0| 0| 0| 0| 0| 0
| 0| 0| 0| 0| 0| 0
| 0| 0| 0| 0| 0| 0
Note 1: “Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition.
Note 2: “0” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.
Note 3: The “—” indicates that the restricted substance corresponds to the exemption.

Automatic system software update
In order to ensure that your products have the latest features and improvements, automatic system software updates are enabled by default, and this is the recommended setting.
You may change this at any time in the UPDATE PRODUCT SOFTWARE menu using the Bang & Olufsen App.
Log information
To help us improve our range of available products and services offered to you, we may request certain information from your product about its performance and usage patterns. The information will at all times be provided on an anonymous basis only. You can at any time easily disable this function in the STATUS menu using the Bang & Olufsen App.
For user guide, see: