NuoDunco ‎hjs00000069-ZSJ Electric Belt Sander User Manual

NuoDunco ‎hjs00000069-ZSJ Electric Belt Sander

IMPORTANT INFORMATION

THE ACCESSORIES OF DIFFERENT PACKAGES ARE DIFFERENT, AND THE SPECIFIC ORDER PICTURES SHALL PREVAIL.

THIS MANUAL IS A GENERIC MANUAL, IF AND PICTURE DOES NOT MATCH IS NORMAL, DOES NOT MEAN THAT YOU BUY THE PACKAGE HAVE THE FOLLOWING ACCESSORIES AND FEATURES. DIFFERENT PACKAGES WITH DIFFERENT ACCESSORIES, THE SPECIFIC ORDER PICTURE SHALL PREVAIL, THIS MANUAL IS ONLY TO SHOW THE INSTALLATION OF VARIOUS FUNCTIONS.

Specification

• Product Name: Mini Electric Belt Sander
• Input Voltage: 110V/220V
• voltage plug: US/EU
• output power : 12-24V
• No-load DB : about 80
• speed Adjustment Mode : 7-speed
• Motor material: all copper motor
• Product speed : 4000-9000/min
• No-load temperature: 20-45°
• Body Material: 304 stainless steel
• Motor Model : T75 with double shaft
• size of Sanding belt: 330*30mm
• warranty period: 1 year
• switch Mode : Three gear switch support forward and reverse rotation

POWER SUPPLY DESCRIPTION

Input Voltage: 110V-220V 50-G0HZ
Plug: US/EU
Output power: 12-24V

THE ACCESSORIES OF DIFFERENT PACKAGES ARE DIFFERENT, AND THE SPECIFIC ORDER PICTURES SHALL PREVAIL.

HOW TO REPLACE THE SANDING BELT?

Operate according to the picture explanation, remove the sanding belt, replace the new sanding belt, and then adjust the sanding belt to make it perfect.

HOW TO INSTALL GRINDING WHEELS?

Remove the dust cover, put on the grinding wheel, insert the wrench shaft to the back of the motor, and then lock the two fixed screws.

Loosen the screw

HOW TO INSTALL GRINDING WHEELS?

Remove the dust cover, put on the grinding wheel, insert the wrench shaft to the back of the motor, and then lock the two fixed screws.

HOW TO INSTALL THE DRILL CHUCK CONVERTER?

Put the black connecting rod into the middle of the drill chuck converter, loosen the fixed screw with a wrench, and put the collet range to the maximum.

Put on the back end of the motor, lock the fixed screw, you can insert a variety of drills, grinding head or soft shaft, and finally tighten the fixing screw to minimize the range of the collet.

NOTE: IF YOU NEED THE ACCESSORIES DISPLAYED ON THE PICTURE, PLEASE BUY SEPARATELY

Find this hole, insert the wrench Then press the wrench with one hand to prevent it from rotating

the other hand rotating the grinding burr drill bit accessories to maximize the range of the collet.
Just put the grinding burr drill bit in and then tighten it.

Note: If you need a soft shaft and grinding accessories displayed on the picture, buy separately. Different machines have different holes. This picture is just a display method.

AFTER THE SAW BLADE IS INSTALLED, USE A WRENCH TO LOOSEN THE ADAPTER SCREW AND THEN INSTALL IT ON THE MACHINE TO TIGHTEN THE INTERFACE SCREW

THE ACCESSORIES OF DIFFERENT CONFIGURATION BELTS ARE DIFFERENT. PLEASE REFER TO THE PICTURES OF THE ORDER FOR DETAILS. THIS MANUAL ONLY SHOWS THE INSTALLATION METHODS OF VARIOUS FUNCTIONS

HOW TO FIX THE MACHINE ON THE DESKTOP?

You can fix it on the wooden table with screws If there is no wooden table when using the grinding wheel function, you can use your hand to stabilize, and the speed can be adjusted to the minimum use.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>