decon X53-DSL One NZ Modem Wi-Fi Troubleshooting User Guide
- June 9, 2024
- decon
Table of Contents
decon X53-DSL One NZ Modem Wi-Fi Troubleshooting
Quick Start Guide
Your modem’s here and getting set up is simple.
- Plug your X53 modem into power.
- Plug the supplied ethernet cable into a yellow port on your X53 modem and plug the other end into the ONT (fibre wall box) – this is the unit your local fibre company would have installed in your home, which is connected to the fibre optic cables in the street.
- The light on the side of your modem will flash yellow while it’s starting up, flash blue during set up, and will turn solid green once it’s connected to fibre.
- You can now connect your devices to Wifi using the username SSID and password on the base of your X53 modem OR simply hover your phone camera over the QR code to connect.
TIP
To add more Deco units, manage your network, prioritise devices and heaps
more, download the Deco app and follow the prompts. Make sure you select the
X53-DSL as your modem type in the app.
PHONE
If you’re connecting a phone line to your fibre service, plug your phone
cable into the green port on your modem – it will take a few minutes to
connect.
Please note, connecting your phone through your modem means your phone will not work if you have no power or aren’t connected to the internet. This includes emergency services.
Need help setting up? Call us on 0800 800 966.
Read User Manual Online (PDF format)
Loading......