GLOBO 41924S PEPE Wall Light LED Instruction Manual
- June 15, 2024
- GLOBO
Table of Contents
GLOBO 41924S PEPE Wall Light LED
Product Information
Specifications:
- Manufacturer: GLOBO Handels GmbH
- Model: 41924S, 41924N, 41924M
- Power: LED 10W
- Input Voltage: DC28-42V, 230V~ 50Hz
- Website: www.globo-lighting.com.
Product Usage Instructions
Introduction
The GLOBO LED light is designed to provide efficient and long-lasting
illumination. It comes with a non-replaceable LED light source and control
gear.
Installation
To install the GLOBO LED light, follow these steps:
- Choose a suitable location for the light fixture.
- Ensure the power source is turned off before installation.
- Mount the fixture securely using the provided mounting hardware.
- Connect the wiring according to the electrical standards and regulations of your country.
- Turn on the power to test the light.
Usage
The GLOBO LED light can be controlled using a compatible switch or dimmer.
Follow these guidelines for optimal usage:
- Use a switch or dimmer that is compatible with LED lights.
- Do not exceed the specified voltage range (DC28-42V, 230V~ 50Hz).
- Avoid excessive heat or moisture, as it may affect the performance of the light.
- Do not attempt to replace the LED light source or control gear, as they are non-replaceable.
Maintenance
To ensure the longevity of your GLOBO LED light, follow these maintenance
tips:
- Regularly clean the light fixture with a soft, dry cloth to remove dust and debris.
- Avoid using harsh chemicals or abrasive materials for cleaning.
- If the light becomes damaged or malfunctions, contact the manufacturer for assistance.
Frequently Asked Questions (FAQ)
-
Q1: Can I replace the LED light source?
No, the LED light source is non-replaceable. It is designed to provide long- lasting illumination without the need for replacement. -
Q2: Can I replace the control gear?
No, the control gear is also non-replaceable. It is integrated into the LED light for optimal performance and functionality. -
Q3: What should I do if the light fixture gets damaged?
If the GLOBO LED light fixture becomes damaged or malfunctions, please contact the manufacturer for assistance. Do not attempt to repair it yourself.
Installation
Light source
The light source is not interchangeable because it is determined by the
surrounding product design. This product contains a light source of energy
efficiency class
- The LED – light source cannot be replaced.
The control gear cannot be replaced.
Contact Information
- GLOBO Handels GmbH Gewerbestrasse 3 A-9184 Sankt Peter AUSTRIA.
- www.globo-lighting.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>