speco technologies SPIP200M IP Audio Encoder User Guide
- August 16, 2024
- speco technologies
Table of Contents
speco technologies SPIP200M IP Audio Encoder
Product Information
Specifications
- Protocol: SIP, ONVIF, HTTP, IPv4, DHCP, RTSP, RTP, RTCP, TCP, UDP, ARP, FTP, TFTP, NFS, NTP
- Codec: OPUS 48 kHz, MP3 44.1 kHz, G.722 ADPCM 16 kHz, G.711 PCMU 8 kHz, G.711 PCMA 8 kHz
- Network Interface: RJ45, 10BASE-T/100BASE-TX
- Power: PoE or DC 12V/24V
- Rated Power: 15W
- Interface: 6 Pin Audio Interface (1 MIC input, 1 Headset output, 1 Speaker output), 4 Pin IO Interface (2 IO Alarm input), 4 Pin Alarm Out Interface (1 Relay output, 1 IO output)
- Function: Compatible with VoIP devices and ONVIF VMS, supports two-way communication, pre-recorded messages, schedule play, GPIO in, HTTP control
- Material: Metal
- Color: Black
- Weight: 250g
Product Usage Instructions
Installation
- Connect the IP Audio Encoder to a power source using PoE or DC 12V/24V.
- Connect the audio interfaces (MIC input, Headset output, Speaker output) and IO interfaces as needed.
Configuration
- Access the device using a web browser and configure the network settings.
- Set up SIP and ONVIF protocols for communication.
- Configure pre-recorded messages and schedules as required.
Operation
- Use the device for two-way audio communication with compatible devices.
- Control the device via HTTP commands for functions like GPIO in and schedule play.
Specification
Protocol
| SIP, ONVIF, HTTP, IPv4, DHCP, RTSP, RTP, RTCP, TCP, UDP, ARP, FTP, TFTP, NFS,
NTP
---|---
Codec
| OPUS 48 kHz, MP3 44.1 kHz, G.722 ADPCM 16 kHz, G.711 PCMU 8 kHz, G.711 PCMA
8 kHz
Network Interface| ****
RJ45, 10BASE-T/100BASE-TX
Power| PoE or DC 12V/24V
Rated Power| 15W
Interface
| 6 Pin Audio Interface： 1 MIC input, 1 Headset output, 1 Speaker output 4 Pin IO Interface：2 IO Alarm input
4 Pin Alarm Out Interface: 1 Relay output，1 IO output
Function
| Compatible with VoIP devices and ONVIF VMS, supports two-way communication,
pre-recorded messages, schedule play, GPIO in, HTTP control
Material| Metal
Color| Black
Weight| 250g
Refer to the product page for the User Manual and full product details at specotech.com
Features
- Two-way audio communication.
- SIP & ONVIF protocol compatibility.
- PoE eliminates the need for local power supply.
- 48K OPUS Audio Codec enables excellent sound quality.
- Support pre-recorded messages, schedule, HTTP, alarm in/out.
Interface
| Label | Description | Label | Description |
|---|---|---|---|
| ① | IO Input Interface | ② | IO Input Interface |
| ③ | Relay NO COM Interface | ④ | IO Output Interface |
| ⑤ | Microphone Interface | ⑥ | Headset Interface |
| ⑦ | Speaker Interface | ⑧ | PoE Interface |
| ⑨ | Volume Control Key | ⑩ | Reset Interface |
| ⑪ | Audio LED | ⑫ | Power LED |
| ⑬ | Power Input Interface |
FAQ’s
Q: Can the SPIP200M IP Audio Encoder be powered using PoE?
A: Yes, the SPIP200M IP Audio Encoder can be powered using PoE or DC
12V/24V.
Q: What audio codecs are supported by the device?
A: The device supports OPUS 48 kHz, MP3 44.1 kHz, G.722 ADPCM 16 kHz, G.711
PCMU 8 kHz, and G.711 PCMA 8 kHz codecs.
Q: How can I configure pre-recorded messages on the device?
A: You can configure pre-recorded messages through the device’s web
interface by accessing the schedule settings.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>