CREATIVE EF1200 Zen Hybrid SXFI Headphones User Guide

ZEN® HYBRID SXEl

Quick Start Guide
Model : EF1200
PN: 0O3EF120000000 RevA

OVERVIEW

Creative Zen Hybrid SXFI

1. Protein Leather Earpads

2. Steel-reinforced Headband

3. SXFI Button

4. ANC Button
   • ANC Features
   • Voice Assistant Features

5. LED Indicators

6. 3.5 mm aux Input

7. Multifunction Button
   • Power
   • Bluetooth® Features
   • Call Features

8. Omni-directional Microphones

9. USB-C Port (For Charging Only)

BLUETOOTH® PAIRING

i) Initiate Bluetooth Pairing

Creative Zen Hybrid SXFI will automatically initiate Bluetooth pairing when powered on for the first time.
ii) Bluetooth Paired iii) Multipoint Connectivity Phone A connected with headphones powered on, power off headphones to disconnect from Phone A Press and hold multifunction button on headphones for 5s to enter Bluetooth pairing, pair to Phone B
Reconnect Phone A to headphones.
Multipoint pairing is now complete

CONTROLI

i) Powering On / Off ii) SXFI Technology

Note: SXFI technology is available during audio playback only and will be disabled during calls and recordings
iii) Playback Mode iv) Call Mode v) Active Noise Cancellation (ANC) Mode vi) Low Latency Mode vii) Voice Assistant

BATTERY CHARGING

ANALOG CONNECTION

CREATIVE APP

Set up your product, personalize audio settings, enhance your product’s performance, and more with the Creative app.
Personalize your Super X-Fi profile through an advanced Head and Ear-Mapping process.
Download the Creative app from:

MASTER RESET

Press and hold the Volume + and – buttons simultaneously for 5 seconds to perform a Master Reset. The LED indicator will display solid white LED briefly to indicate completion. Creative Zen Hybrid SXFI will return to its default settings.

TECHNICAL SPECIFICATIONS

Headphone Drivers

• Custom Tuned 40 mm Neodymium Driver
• Frequency Response: 20-20,000 Hz
• Sensitivity: 116 dB
• Impedance: 32 ohm

Microphones

• Type: Omni-directional x 5

Bluetooth Version

• Bluetooth 5.2

Bluetooth Profiles

• A2DP (Advanced Audio Distribution Profile)
• AVRCP (Audio / Video Remote Control Profile)
• HFP (Hands-free Profile)

Audio Codecs

• AAC
• SBC

Bluetooth Operating Frequency

• 2402-2480 MHz

Wireless Operating Range

• Up to 15m / 49.2 ft

Maximum RF Output Power

• 9dBm

Voice Assistant Support

• Siri
• Google Assistant

Battery Type

• Rechargeable Lithium-ion Polymer Battery 600 mAh x 1 Playtime”
• Up to 67 Hours (With ANC Off)
• Up to 49 Hours (With ANC On)

Charging Interface

• USB-C (Charging)

Charging Time

• 2 Hours

Operating Temperature

• 0-45°C

Based on moderate volume level. Actual battery life will vary with use, settings, songs, and environmental conditions
Note: Compliance markings are located on the inner hinge of the product
The use of the WEEE Symbol indicates that this productmay not be treated as household waste. By ensuring this product is disposed of correctly, you will help protect the environment. For more detailed information about the recycling of this product, please contact your local authority, your household waste disposal service provider or the shop where you purchase the product.

PRODUCT REGISTRATION AND WARRANTY

Registering your product ensures you receive the most appropriate service and product support available. You can register your product at creative.com/register. Please note that your warranty rights are not dependent on registration.
Creative warrants the included Creative-branded hardware product (the “Product”) against defects in materials and workmanship (“Defect(s)”) for twelve (12) months (for the European Union, twenty-four (24) months (excluding all wear and tear), subject to
certain exceptions as stated in the EU Directive 1999/44/EC) from the date of purchase. The Creative Limited Hardware Warranty (the “Warranty”) does not cover (but not limited to) consumable parts, such as batteries or protective coatings that, due to their nature, tend to diminish over time; normal wear and tear, accidents or misuse. You must provide Creative proof of original purchase of the Product by a dated itemized receipt to be eligible for the Warranty. If a Defect arises and a valid claim is received during the applicable Warranty Period, Creative will at its sole option, service the Product at no charge using new or refurbished replacement parts at our sole discretion. Warranty benefits are in addition to rights provided under local consumer laws.
For Australia only: Our goods come with guarantees that cannot be excluded under the  Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired.  Refurbished parts may be used to repair the goods. [Address: Creative Technology Ltd, 31 International Business Park, #03-01, Singapore 609921. Telephone: +65 6895 4101 (standard international call charges apply.)]

http://creative.com/compliance/zenhybridsxfi

For the full terms and detailed information on the Warranty, please visit creative.com/compliance/zenhybridsxfi, or scan the QR code.
A printed copy is available upon request to Creative Labs, Inc., 1900 McCarthy Boulevard, Suite 103, Milpitas, CA 95035.
changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information:
FCC RF Exposure requirements: The highest SAR value reported under this standard during product certification for use next to the head with the minimum separation distance of Omm. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter

OTHER INFORMATION

Please visit creative.com/compliance/zenhybridsxfi for the user guide, safety and regulatory information and battery removal instruction, which is meant strictly for independently qualified professional.
Please visit creative.com/support/zenhybridssfi for all other support related to your product.

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receivingantenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Portable
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
ISED Statement
English:This device contains licence-exempt transmitter(s)/receiver(s) that comply with
Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).
This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.
Portable
RF Exposure Statement
This equipment should be installed and operated with minimum distance 0 cm between the radiator & your body.

FCC ID: 2AJIV-EF1200
IC: 20469-EF 1200
219-248066

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>