PYLE Universal Laptop Device Stand User Manual
- June 7, 2024
- Pyle
Table of Contents
PYLE Universal Laptop Device Stand
Slide the metal mounting clamps onto both ends of the extension arm. Each side is fitted with rubber grips that the clamps use for holding support. Be sure as to, at least partially, slide the metal mounting clamps to lay over the rubber grips. Use the dual clamp-style knobs on both sides on each of the mounting clamps to secure the angle and placement of the device resting plate.
Use the included hardware to secure the device resting plate with the metal mounting clamps. The holes in the mounting clamp brackets should align with the holes protruding through the base plate. Be sure to use a washer between the wing nut and the metal mounting clamp when securing.
The plate bolts are to be inserted from the top of the unit, going downward through the device resting plate, and out of the other end to meet the metal mounting brackets. The metal mounting bracket clamps can be adjusted or loosened accordingly to allow for angle/tilt adjustment.
Slide the assembled extension arm and device resting plate into the assembled folding tripod base with the inserted extension arm fitting insert. The top clamp style knob allow for height adjustment by raising or lowering the unit’s extension arm. The lower clamp style knob allows for securing the stand’s stability when the tripod legs are extended. The unit also features a safety pin that acts as a backup for the stand’s height adjustment safety.
Features:
-
Universal Device Stand
-
Quick & Easy Setup
-
Tripod Floor-Standing Design
-
Lightweight, Portable & Reliable
-
Quick & Convenient Height Adjustment
-
Angle Adjustable Device Tray
-
Rugged & Durable Metal Construction
-
Disassembles for Travel & Storage
-
Works with Audio/Video Devices, DJ Sound Equipment
(Laptops, Notebooks, Mixers, Amplifiers, etc.) -
Used by Musicians, DJs, Performers, Engineers, etc.
-
For On-Stage or In-Studio Use
What’s in the Box:
- Universal Laptop Device Stand
Technical Specs:
- Some Assembly Required
- Height Adjustable: 28.0” – 50.0” -inches
- Construction Material: Metal Stand, Engineered ABS Shelf
- Shelf / Device Tray Size (L x W): 20.0” x 16.0” -inches
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>