HUSKY G3600ASR-US 36 Inch Wall Shelf User Guide
- June 3, 2024
- Husky
Table of Contents
HUSKY G3600ASR-US 36 Inch Wall Shelf
USE AND CARE GUIDE
36 IN. WALL SHELF (RED)
Questions, problems, missing parts?
Before returning to the store, call
Husky Customer Service
8 a.m. – 5 p.m., EST, Monday – Friday
1-888-HD-HUSKY
WWW.HUSKYTOOLS.COM
Due to continuing improvements, the actual product may differ slightly from the product described herein.
THANK YOU
We appreciate the trust and confidence you have placed in Husky through the
purchase of this wall shelf. We strive to continually create quality products
designed to enhance your home. Visit us online to see our full line of
products available for your home improvement needs. Thank you for choosing
Husky!
Safety Information
To reduce the risk of serious injury, read and follow the safety instructions below before assembling and using this product.
- This product is intended for indoor use only.
- This product is not designed for commercial nor industrial usage.
- A CAUTION: Any assembly or maintenance manpower when assembling, installing and moving the product.
- A CAUTION: Check all nuts and bolts periodically for tightness. When required, tighten them.
Warranty
This warranty excludes incidental/inconsequential damages and failures due to
misuse, abuse or normal wear and tear. This full warranty gives you specific
rights, and you may also have other rights, which vary state to state.
Contact the customer service team at 1-888-HD-HUSKY or visit
www.huskytools.com.
Specifications
- Maximum load for shelf (when distributed evenly) 75 lbs. / 34 kg
Pre-Installation
TOOLS REQUIRED
HARDWARE
INCLUDED
PACKAGE CONTENTS
Assembly
NOTE: Assemble on a flat surface. A piece of cardboard is recommended LJ to keep the product from being scratched during assembly.
CAUTION: Please wear gloves during the whole assembling process.
ATTACH THE BOTTOM AND BACK PANELS
Attach the bottom panel (C) to the back panel (A) by sliding the back
panel’s (A) edge into the groove of the bottom panel(C).
ATTACH THE SIDE PANELS
Attach the side panels (B & D) to the unit. Slide the bottom panel’s (C) side
edges into the grooves of the side panels (B & D).
HANG THE WALL SHELF
-
CAUTION: Make sure the wall shelf is securely attached to the mounting bracket.
-
CAUTION: Use a level to make sure the wall shelf is level after installation.
-
CAUTION: It is recommended to insert the M6 x 40 hex tapping bolts (AA) into A the studs of the wall. Loading capacity will be reduced if the mounting bracket is not secured to studs, and drywall anchors (not included) are suggested to use when the mounting bracket can not be installed to studs.
-
NOTE: Additional holes in bottom panel may be used for installing a shop light or other accessories. (sold separately)
-
Fix the mounting bracket (E) on the wall with two M6 x40 hex tapping bof ts (AA)
using a power drill. -
Hang the wall shelf onto the mounting bracket (E).
Make sure the wall shelf is securely attached to the wall.
Coordinating Products
This product coordinates well with the units below to offer a best storage
solution.
They can be combined into various combinations to meet different storage
requirements.
Maintenance
Check all the screws and nuts periodically for tightness. Tighten them when necessary.
Care and Cleaning
- Periodically clean the surfaces with a soft rag and water.
- Grease and oil can be removed with most standard cleaning fluids. For safety, use a nonflammable cleaning fluid.
Service Parts
Please contact 1-888-HD-HUSKY for further assistance.
Questions, problems, missing parts? Before returning to the store, call Husky
Customer Service
8 a.m.-5 p.m., EST, Monday-Friday
1-888-HD-HUSKY
WWW.HUSKYTOOLS.COM
Retain this manual for future use.