anko Unicorn Clock Instruction Manual
- June 7, 2024
- Anko
Table of Contents
anko Unicorn Clock Instruction Manual
WARNING! Not suitable for children under 3 years due to small parts.
Choking hazard. Use with care and only under
adult supervision.
ADVICE FOR SUPERVISING ADULTS
- Read and follow these instructions and the safety rules and keep them for reference.
- The supervising adult should discuss the warnings and safety information with the child or children before commencing to use this product.
WARNING: INSERT BATTERIES WITH THE CORRECT POLARITY AND ALWAYS FOLLOW THE
MANUFACTURER’S INSTRUCTIONS.
DO NOT MIX NEW AND USED BATTERIES OR ALKALINE, STANDARD (CARBON-ZINC), OR
RECHARGEABLE (NICKEL-CADMIUM) BATTERIES. REMOVE BATTERIES IF THE PRODUCT WILL
BE STORED FOR AN EXTENDED PERIOD. DISPOSE OF USED BATTERIES RESPONSIBLY
CAUTION: BATTERY INSTALLATION BY AN ADULT IS REQUIRED.
Requires 3 x 1.5v AAA batteries (not included).
_ **Unscrew the battery compartment to insert batteries.
**_
_ **Batteries are to be inserted with the correct polarity.
**_
Replace the cover and screw using a screwdriver.
FEATURES
- Displays day, month, date and time. Time can be selected to be in either 12-hour or 24-hour formats.
- Displays temperature in either celsius (0 to 55°C) or fahrenheit (32-122°F)
- 7 colour changing sequences.
OPERATING INSTRUCTIONS
TO SET TIME AND DATE
Press SET to program time and date. Use UP and DOWN to adjust. Press SET again to confirm each setting. The sequence is as following: Hour Minute Year Month Day Exit. The range of settings are: 1-12 or 0-23 for hour, 0-59 for minute, 2000-2099 for year, 1-12 for month, 1-31 for day. The day will change automatically, eg.) from Sun to Mon with the change in date that occurs at 00.01 am.
12/24 HOUR CONVERSION
In normal mode, press UP to convert between 12-hour or 24-hour format.
TO SET ALARM AND SNOOZE
- Press the AL key in normal display mode.
- Press SET to program the alarm time. Use UP and DOWN to adjust the time. Press SET again to confirm each setting.
The sequence is as follows: Hour → Minute → Snooze delay (from 1 to 60 min.) → Music → exit.
TO ACTIVATE ALARM AND SNOOZE FUNCTION:
Press AL once and then press UP and DOWN to activate alarm and snooze. Press
AL again to return to normal With alarm sound on, press AL, UP or DOWN to
enter the snooze mode. The Zz icon will flash. The alarm will repeat again
after the interval, set in step 2. Press SET to stop alarm sound.
TEMPERATURE CONVERSION
Press DOWN to convert between Celsius and Fahrenheit temperature.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>