Drok Transistor Tester User Guide
- June 7, 2024
- Drok
Table of Contents
Drok Transistor Tester User Guide
Display Interface:
Parameters:
Voltage supply: DC 6F229V Layer-built Battery (NOT Included)
Transistors range: 2 or less (including 2) P-N junction transistor
Resistors range: 0.5Ω – 50MΩ
Capacitors range: 25pF-100000uF
Inductors range: 0.01mH – 20H
Screen: 1.8 inch TFT color LCD screen
Auto shutdown time: 40 seconds longest (can be manually shutdown at any
time)
Auto shutdown countdown: When there are 5 seconds left, the fonts turn
red and flash as a reminder.
Dimensions: 70mm × 135mm × 24mm
Operating Instruction:
The pins of the electronic components can be connected to the 1,2,3 pin
optionally.
This multifunctional meter is automatic identification type, which can detect
the pin sequence, graphic display and parameters automatically.
Eg. When testing a triode:
- Insert the triode into the testing interface optionally without considering about the BEC order of 1,2,3 pin.
- Press the testing button.
- The meter will identify if it is triode, field-effect tube, controlled silicon or resistance capacitance.
- The tester will detect if it is NPN or PNP and then detect the BCE order and other information.
Testing Range:
- Range of Transistor: transistor consisting of less than two (including two) PN nodes with no other resistors or capacitors inside.
- Range of Resistance Testing: 0.5Ω-50MΩ
- Range of Inductance Testing: 0.01mH-20H
- Range of Capacitance Testing: 25pf – 100000uF
Any questions please contact us through Amazon:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>