rega RX-ONE Loudspeaker System User Guide
- June 4, 2024
- Rega
Table of Contents
rega RX-ONE Loudspeaker System
Specifications
- System: 2 way
- Cabinet Construction: 18mm MDF Real wood veneer
- Cabinet Design: Bass reflex
- Dimensions (cm) H x W x D: 34.4 x 17.3 x 26
- Weight (each): 5.8 Kg
- Reflex Port: Rear port
- Impedance: Nominal 8Ω
- Sensitivity: 89 dB
- Power Handling: 80w per channel *
- High Frequency unit: Rega ZRR
- Mid /bass driver (Doped cone): Rega DX-125
*Power handling figures are quoted as a guide. Amplification between 30w and 500w can be safely used depending on the quality of amplification.
To ensure adequate clearance and prevent damage to the front facia, the grille magnets must locate directly onto the drive unit fixing bolts.
INSTRUCTION
The Rega RX-ONE loudspeaker system delivers balance, detail and dynamics thanks to a unique handmade set of Rega-designed drivers and crossovers.The newly developed DX-125 bass mid-range driver (using a doped paper cone) is at the heart of the RX range and combines perfectly with the Rega ZRR high- frequency unit. Both mounted in a larger cabinet constructed from 18mm MDF and covered in a choice of beautiful real wood veneers, the RX-ONE will integrate perfectly into any home delivering exceptional performance within a wide range of systems.
Connection
Ensure the color terminals Red (+) and Black () are connected to the correct terminals at both loudspeaker and amplifier bind posts. We recommend using good quality loudspeaker cable such as the Rega ‘Duet. Always use the same length speaker cable for each loudspeaker.
Positioning
The RX-ONE’s can be used on stands, a sturdy shelf or mounted directly on the wall via the RX- ONE wall bracket (sold separately). Imaging and bass response can be tuned by adjusting the distance of the speaker from the rear and side walls. As with all loudspeakers, this will be dependent on the size of the room, flooring and furnishings therefore some simple experiments trying to differ- ent distances will help optimize the performance to your surroundings.
Protective Grille
The four magnets attached to the grille MUST locate directly onto the four drive unit screws. This ensures good operational clearance and prevents cosmetic damage to the front facia. The high-frequency unit is protected from damage by the front facia detail.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>