PHILIPS BDP101 LED30 Polycarbonate Bowl Cover Frosted Instructions
- May 15, 2024
- Philips
Table of Contents
PHILIPS BDP101 LED30 Polycarbonate Bowl Cover Frosted
Product Information
Specifications
- Lamp Family Code: LED30
- Light Source Replaceable: Yes
- Input Voltage: 220-240 V
- Power Consumption: 23.5 W
- Ingress Protection Code: IP66 (Dust penetration-protected, jet-proof)
- Mech. Impact Protection Code: IK10 (20 J vandal-resistant)
- Luminous Flux Tolerance: +/-7%
- Initial Chromaticity: (0.43, 0.40) SDCM
Product Usage Instructions
Operating and Electrical
The TownGuide Performer operates at an input voltage of 220-240 V with a power
consumption of 23.5 W. Ensure the screw connection block is securely
connected.
Controls and Dimming
The lighting fixture is non-dimmable and features a control interface for
constant light output. The power supply unit regulates with constant light
output for consistent performance.
Mechanical and Housing
The fixture is designed with IP66 Ingress Protection, making it dust
penetration-protected and jet-proof. The IK10 rating ensures it is vandal-
resistant with surge protection up to 6 kV differential mode and common mode.
FAQ
Q: Is the LED module replaceable in the TownGuide Performer?
A: Yes, the LED module in the TownGuide Performer is replaceable.
Q: Can the TownGuide Performer be dimmed?
A: No, the TownGuide Performer is non-dimmable.
TownGuide Performer
BDP101 LED30/830 DW PCF SI CLO 62P
TOWNGUIDE PERF BOWL, LED module 3000 lm, Distribution wide, Polycarbonate bowl/cover frosted, Constant light output,Post-top for diameter 62 mm
The TownGuide Performer family consists of six recognizable, yet modern shapes: Flat Cone, Bowl, Classic Cone, Classic T, T and Tzero. Each luminaire has the option of a clear (PCC), translucent (PCTR) or frosted (PCF) bowl (except Tzero, which is only available with a clear bowl). With an extensive range of lumen packages, neutral white or warm white LED lights sources, and a range of dedicated optics for lower mounting heights, it’s easy to select the version that best suits the specific requirements of your project. All this combined with a long life expectancy of 100,000 operating hours. In addition, TownGuide Performer has a variety of control system options that can make this luminaire an integral part of smart energy-reduction programs. This includes LumiStep, DynaDimmer, and LineSwitch stand-alone dim control, and Coded Mains group control, right up to seamless remote connectivity with Interact lighting management software. Installation is easy. Thanks to the bayonet whistle connector with integrated gland located in the spigot, there’s no need to open the luminaire for installation.
The Signify Service tag app offers direct access to all relevant data, ensuring maintenance is easy too. Philips has made every effort to make the Total Cost of Ownership (TCO) of the luminaire as attractive as possible. And as TownGuide Performer is a dedicated LED luminaire, compatible with a variety of control systems, there are significant energy and maintenance cost savings compared with conventional lighting.
Product data
General Information
- Lamp family code LED30 [LED module 3000 lm]
- Light source replaceable Yes
- Number of gear units 1 unit
- Driver included Yes
- Photocell –
TownGuide Performer
- Light source engine type LED
- Service tag Yes
- Product family code BDP101 [TOWNGUIDE PERF BOWL]
- Lighting Technology LED
- Value ladder Performance
- Embedded control Constant light output
- CE mark Yes
- Warranty period 5 years
- Flammability mark –
- ENEC mark ENEC mark
- Glow-wire test Temperature 650 °C, duration 5 s
- EU RoHS compliant Yes
- Serviceability class Class A, luminaire is equipped with serviceable parts (when applicable): LED board, driver, control units, surge protection device, optics, front cover and mechanical parts
Light Technical
- Upward light output ratio 15
- Luminous Flux 1,798 lm
- Standard tilt angle posttop 0°
- Standard tilt angle side entry –
- Correlated Color Temperature (Nom) 3000 K
- Luminous Efficacy (rated) (Nom) 80 lm/W
- Color rendering index (CRI) 80
- Number of light sources 4
- Light source color 830 warm white
- Optical cover type Polycarbonate bowl/cover frosted
- Luminaire light beam spread 50° x 70°
- Optic type outdoor Distribution wide
Operating and Electrical
- Input Voltage 220-240 V
- Line Frequency 50 to 60 Hz
- Initial CLO power consumption 22.5 W
- Average CLO power consumption 23 W
- End CLO power consumption 23.5 W
- Inrush current 22 A
- Inrush time 0.29 ms
- Power Consumption 23.5 W
- Power Factor (Fraction) 0.97
- Connection Screw connection block 5-pole
- Cable –
- Number of products on MCB of 16 A type B 20
Temperature
- Ambient temperature range -40 to +35 °C
Controls and Dimming
- Dimmable No
- Driver/power unit/transformer Power supply unit regulating with constant light output
- Control interface –
- Constant light output Yes
Mechanical and Housing
- Housing Material Aluminum
- Reflector material –
- Optic material Acrylate
- Optical cover material Polycarbonate
- Fixation material Steel
- Housing Color Silver
- Mounting device Post-top for diameter 62 mm
- Optical cover shape Hemispherical flat
- Optical cover finish Frosted
- Overall height 293 mm
- Overall diameter 570 mm
- Effective projected area 0.095 m²
- Parts color All parts colored
Approval and Application
- Ingress protection code IP66 [Dust penetration-protected, jet-proof]
- Mech. impact protection code IK10 [20 J vandal-resistant]
- Surge Protection (Common/Differential) Luminaire surge protection level until 6 kV differential mode and 6 kV common mode
- Sustainability rating Lighting for circularity
- Protection class IEC Safety class I
Initial Performance (IEC Compliant)
- Luminous flux tolerance +/-7%
- Initial chromaticity (0.43, 0.40) SDCM <5
- Power consumption tolerance +/-10%
- Init. Color Rendering Index Tolerance +/-2
Over Time Performance (IEC Compliant)
- Driver failure rate at 5000 h 0.5 %
- Control gear failure rate at median useful life 100000 h 10 %
- **Lumen maintenance at median useful life*** 100000 h 96
Application Conditions
- Performance ambient temperature Tq 25 °C
- Maximum dim level Not applicable
Product Data
- Order product name BDP101 LED30/830 DW PCF SI CLO 62P
- Full product name BDP101 LED30/830 DW PCF SI CLO 62P
- Full product code 871829191060200
- Order code 910500991121
- Material Nr. (12NC) 910500991121
- Numerator – Quantity Per Pack 1
TownGuide Performer
- EAN/UPC – Product/Case 8718291910602
- Numerator – Packs per outer box 1
- EAN/UPC – Case 8718291910602
Dimensional drawing
© 2024 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>