Saramonic Multi-Pattern XLR USb Condenser Microphone User Manual
- June 7, 2024
- Saramonic
Table of Contents
Saramonic Multi-Pattern XLR USb Condenser Microphone
Introduction
The SR-MV7000 is an XLR & USB condenser microphone which can be used to capture audio to computers, most USB-C devices, XLR preamps and audio mixers with+48V phantom power. It features two selectable output solutions, one is 5-pin XLR output jack with 5-pin XLR to dual 3-pin XLR cable supplied, which can be used to connect to professional audio devices like audio mixer, another one is USB-C output jack, with USB-C to USB-NC output cables to connect with computers and other USB-C devices. And 4 pick-up patterns, low-cut filter, selectable gain control and 3.Smm headphone monitor jack helps you get the ideal sound for your recording, conference, interview, live-streaming and etc. Designed with 5/8″ female thread at the bottom of unit, it gives you variable options mounting to a tripod, boom pole and more. Including a detachable desktop stand and pop filter, you can start home-studio recording, podcast, voice-over as easily as possible.
Statement
Please read this manual carefully before using and strictly operate and store in accordance with the instructions. Please save it for your future reference. If the user manual can not help you to solve problems, please ask your retailer for help or email us: info@saramonic.com.
Cautions:
- Do not use the unit under moisture condition or water, don’t expose it to rain. Please store it in a cool, dry place.
- Please use and store it in normal temperature. Do not move it from overheated to supercooled condition frequently as well as keep away from heat sources such as heater or oven.
- When using and storing, please pay attention to dust and moisture.
- Be careful to violent collision.
- To avoid acoustical feedback, do not hold the microphone close to the loudspeakers.
- For the best pick-up pattern, do not hold your hand against the microphone cover.
Product Structure
- Microphone capsule
- Gain indicator(OdB, 10dB, 20dB, 30dB) @ Mute button
- Polar pattern indicator
- Volume control
- GAIN control
- !l Switchable pattern button
- High-pass filter button ( To attenuate frequencies lower than 150 Hz. It can be used to remove rumble or other low frequency noise while recording.)
- 3.Smm headphone output
- 5-PIN XLR output
- USB-C output ( DC 5V)
- 5/8″ threaded hole
Operational Guide
Setups Procedure
Mac OSX Setup Procedure (10.6.4 or later)
- Connect the microphone to your computer via the supplied USB-C to USB-A output cables.
- Open the Apple interface and select the “System Preferences·.
- Select the icon of “Sound”.
- Choose ·use Audio Device” as input device and click “OK”.
Windows Setup Procedure
- Please download the driver from this website before Windows computer using. (http://www.jiayz.com/soft- ware/driver/official/XMOS-Ste- reo-USB-Audio-Class2-Driver-30E3_v4.13.0.exe)
- After running the driver, simply follow the instructions to complete the installation.
- Connect the microphone to your computer via the supplied USB-C to USB-A cable.
- Open the control panel and select the “Sounds and Audio Devices”
- Select· Audio” tab and choose “XMOS USB Audio” as input device.
USB-C devicase Setup Procedure
Connect the microphone to your USB-C devices via the supplied USB-C to USB-C
output cables.
Note: If your USB-C devices requires setting OTG function manually, please set
the RQTG Connection” to “ONR. The OTG connection menu is usually in the
“Additional Settings” in your phone setting menu.
Tips
To get optimum sound performance, adjust the microphone’s pick-up angle. For
maximum clarity and intelligibility, position the microphone pointed directly
at the subject’s mouth.
Before adjusting the angle, slightly loosen the knobs. Avoid tightening or
loosening knobs with great force as it might damage the screw threads. Always
mount the pop filter to avoid plosive when recording.
Audio Output
The microphone offers two types of output
Type-CAudio Output (Digital Signal Mode)
Connect the microphone to your computers, USB-C devices via the supplied USB-C
to USB-NC output cables.
XLRAudio Output(Analog Signal Mode)
As an analog microphone, the 5-pin XLR output can be used to connect
professional audio devices like audio mixer via S-pin XLR to dual 3-pin XLR
cable and requires external 48V phantom power to operate.
NOTE: The headphone ouput can’t be functioned when in analog signal mode.
Please connect the headphone output of mixer to monitor the incoming audio.
Packing List
- SR-MV7DDO microphone
- Microphone stand
- Pop filter
- 1.6′ (0.5m) 5-pin XLR Female to dual 3-pin XLR Male Y-Cable
- 3.9′ (1.2m) USB-C to USB-A Cable
- 3.9′ (1.2m) USB-C to USB-C Cable
Specifications
Polar Patterns
Cardioid
Captures sound directly in front of microphone and reject off-axis sound and
ambient noise. Ideal for podcasts, vocal performance, instruments,
livestreaming or other vocal recording.
Omnidirectional
Picks up sounds in all directions. Ideal for multiple person recording
applications, like round table discussions, conference calls, multi-person pod
casts.
Stereo
Captures detailed stereo recording. Ideal for music, dialogs, or ambient sound
recording in stereo.
Bidirectional
Captures audio from the front and rear of the microphone, and provide equal
sensitivity to both sides. Ideal for 2-person podcasts, interviews, dialogues,
and music recording applications. 
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>