BLAUPUNKT Electric Ovens Instruction Manual
- June 7, 2024
- Blaupunkt
Table of Contents
BLAUPUNKT Electric Ovens
Important notes
- To achieve the utmost in enjoyment and performance, and in order to become familiar with its features, please read this manual carefully before attempting to operate this product. Before using this device read the instruction manual and follow the instructions inside. The manufacturer is not liable for any damages caused by the misuse of this device due to inappropriate handling. Please keep this manual for future reference.
- This device is for domestic use only. Do not use for any other purposes.
- The device should only be connected to an earthed socket with values corresponding to the values on the rating label. It is necessary to check, if total current consumption of all devices plugged into the wall outlet does not exceed the fuse in the circuit.
- If you are using an extension cord, make sure that the total power consumption of the equipment plugged into the extension cord does not exceed the extension cord power rating. Extension cords should be arranged in such a way as to avoid tripping hazards.
- Make sure the cable is grounded, 3-cores with a socket and an earth cable.
- Do not let cord hang over edge of counter, or touch any hot surface.
- The device is not designed to be controlled via an external timer, separate remote control, or other equipment that can turn the device on automatically.
- Before maintenance work always disconnect the unit from the power supply.
- When unplugging the power cord from electrical outlet, hold it by the plug only and remove the plug carefully. Never pull the cable as it may cause damage to the plug or power cord. Damage to the power cord or plug can lead to an electrocution hazard.
- Never leave the product connected to the power source without supervision.
- Never put the power cable, the plug or the whole device into the water or any other liquids.
- The device should be cleaned regularly complying with the recommendations described in the section on cleaning and maintenance.
- Do not place the device near sources of heat, flame, an electric heating element or a hot oven. Do not place on any other device.
- This equipment can be used by children aged 8 years and over under as long as supervision is provided. People with reduced physical or mental capabilities, as well as people with no previous experience of using this equipment must be supervised and made aware of the risks. The instruction manual should be used as a reference for the safe use of this equipment. Children should not play with the equipment. Children without ensured supervision should not be allowed to perform the cleaning and maintenance of equipment. Additional precautions should be taken when using this device in the presence of children or pets. Do not allow children to play with the device.
- Never use the product close to combustibles.
- Never expose the product to atmospheric conditions such as direct sun light or rain, etc… Never use the product in humid conditions (like bathroom or camping house).
- The power cable should be periodically checked for damage.
- If the power cable is damaged the product should be taken to a professional service location to be fixed or replaced to prevent any hazards from arising.
- Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defected product by yourself as it can lead to electric shock. Always return the damaged device to a professional service in order to repair it. All the repairs should only be performed by authorized service professionals. Any attempted unauthorized repairs performed can be a hazard to the user.
- Only Original accessories should be used, as well as accessories recommended by the manufacturer. Using accessories which are not recommended by the manufacturer may result in damage of the device and may render the device unsafe for use.
- Do not place the oven directly under an electric socket. Do not place the power cord above the oven. The power cord cannot touch the hot surfaces of the oven.
- The oven should be placed on a surface that is resistant to high temperatures. Leave sufficient space for ventilation (10 cm on each side of the oven and at least 30 cm above the oven).
- Do not put dishes inside the oven which occupy the entire capacity of the oven or significantly limit the air flow in the oven.
- Do not use the oven with the door open or half-opened.
- Do not use wire wools or similar accessories for cleaning the oven. Broken wire wool fragments pose a risk of electric shock if they touch electrical parts of the device.
- This appliance has heating function. Surfaces, also different than the functional surfaces can develop high temperatures. The appliance shall be touched only at intended handles and gripping surfaces and protective gloves are recommended (like kitchen gloves)
- Before storing, let the appliance cool down.
- Do not put into the appliance any products made of cardboard, paper, plastic materials or any other flammable or melt able objects.
- Do not move the appliance during operation and after operation, before the appliance cool down.
Device is compliant with EU directives:
- Low voltage directive (LVD)
- Electromagnetic compatibility (EMC) Device marked CE mark on rating label
When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2012/19/EU. Please inform yourself about the local separate collection system for electrical and electronic products. Used appliance should be delivered to the dedicated collecting points due to hazardous components, which may affect the environment. Do not dispose this appliance In the common waste bin.
Environmental information
All unnecessary packaging has been omitted. We have tried to make the
packaging easy to separate into three materials: cardboard (box), polystyrene
foam(buffer) and poly ethylene (bags, protective foam sheet). Your system
consists of material which can be recycled and reused if disassembled by a
specialized company. Please observe the local regulations regarding the
disposal of packaging materials, exhausted batteries and old equipment.
Your products is designed a manufactured with high quality materials and
components, which can be recycled and reused.
Components
-
Control Panel:
a) Temperature control knob
b) Oven operating mode knob
c) Timer knob with on/off switch -
Oven door handle
-
Top heaters
-
Bottom heaters
-
Rotisserie mounting with a drive
-
Rotisserie support point
-
Bake tray
-
Crumb tray
-
Baking rack
-
Spit
-
Spit forks
-
Spit removal handle
-
Rotisserie removal handle
USE
Set the temperature with the temperature control knob (1a).
Select the operating mode by turning the operating mode knob (1b).
- Convection with top and bottom heaters
- Convection with top heaters
- Rotisserie with top and bottom heaters
- Rotisserie with top heaters
- Convection with rotisserie and top and bottom heaters
Turn on the oven by setting the timer to the desired period of time.
After the specified time the oven will turn off automatically, making a signal
sound.
USE OF THE ROTISSERIE
Put the product on the spit (10). Attach it using the forks (11). Place the spit on the right side of the spit mounting with a drive (5); then, on the left side, place the narrowed part of the spit in the spit support (6). To operate the spit, use the spit handle (12). Be particularly careful when removing the spit. To do this, use the handle (12). Waiting until the oven has cooled is recommended.
CLEANING AND MAINTENANCE
Before cleaning the oven, make sure that the device is unplugged and cooled
down completely. Wash the accessories in water with dishwashing liquid. Do not
wash the accessories in the dishwasher. Wipe the interior of the oven with a
wet sponge with dishwashing liquid. Next, wipe it with a slightly moistened
cloth and then wipe it dry. It is recommended that the interior of the oven be
cleaned after every use.
Wipe the external surfaces of the oven with a slightly damp cloth, then wipe
it dry. Bulb replacement:
To replace the bulb, unscrew the bulb shield. Unscrew and remove the bulb.
Screw in the new Blaupunkt ACC031. Screw the bulb shield back in.
Competence Center
2N-Everpol Sp. z o.o.
ul. Puławska 403A
02-801 Warsaw, Poland
phone: +48 22 331 99 59
e-mail: info@everpol.pl
www.blaupunkt.com
In case of questions or problems
please contact our service.
Tel. 00 48 22 331 99 54
E-mail: sda@blaupunkt.pl
All rights reserved. All brand names are registered trademarks of their respective owners. Specifications are subject to change without prior notice.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>