YOMT TF3001 Universal Floor TV Stand Instruction Manual
- June 15, 2024
- YOMT
Table of Contents
INSTALLATION
NOTE MANUAL
Model No.
TF3001
TF3001WHT
YL-2208A
Series No.
NOTE: The difference in appearance between mount will not affect the assembly and usage.
THANK YOU FOR PURCHASING
SERVICE CARD
We strive to make sure each furniture you received is perfect, all parts and hardware in the parts list are included in your package. However, if any lack or damaged of components, please do not return the product directly to any local store, feel free to contact us, we will do our best to solve your problem and send the replacement parts to you as soon as possible from our local customer service center.
- Please provide following information before you contact us. Your detail information will help us to bring you a much faster and effective service. Thank you for your kindly understanding and patience!
-
Order ID. -in your order details in online shopping platform.
Model No. – lower left corner on manual first page, or SKU no. in order details.
Series No. – lower right corner on manual first page. -
Shopping platform you place the order: Amazon, Walmart, Ebay or Others
-
Inform your problem and advices to us to make good solutions.
NOTICE
| Please read this assembly manual carefully and make sure you have all the
parts in the list before you begin to install.
Meanwhile, please keep this assembly manual for future reference.
---|---
| Please move the furniture gently with 2 persons.
| Please protect the furniture by placing all parts on a soft surface during
assembly.
| Please don’t place very warm/cold objects on top of any surface, clean
immediately with microfiber cleaning cloths/ towels if any liquids on the
surface. Never use multi-surface furniture polish spray or cleaner. Do not
touch the surface with a hard/acute object that may cause scratch or broken.
| Adult supervision required. Keep little parts of furniture far away from the
children.
Do not allow children to climb onto the furniture. Improper use or incorrect
assembly may cause death or serious injury. Use extra safety straps to ensure
the best tip-over protection. Do not use this product for any purpose or in
any configuration not explicitly specified in this instruction. We hereby
disclaim any liability for injury or damage arising from incorrect assembly,
incorrect mounting, or incorrect use of this product.
PRODUCT DESCRIPTION
PARTS LIST
MEASURE VESA FOR YOUR TV
-
What does the VESA standard mean?
The VESA standard is a standard for attaching flat screens / LCD / monitors / televisions to monitor mounts or TV mounts. Prerequisite is that both the monitor / TV and the monitor mount have the same VESA standard. -
Look at the back of your TV/monitor for threaded holes. Measure the horizontal distance W and vertical distance H of the screw holes (center to center). W x H should comply with the VESA standard of TV stand listed in below sheet.
Notice: If the TV is not compatible with VESA, it can still be attached to the desired bracket by using VESA Adapters(not included and should extra buy).
Please check the weight of your display, it should be less than 88lbs/ 40kgs.
STEP 2 Select TV Screw Length
When attaching brackets to the TV, be careful not to over tighten screws
and be sure that screws don’t bottom out in the mounting holes. Please make
sure the length of thread engagement at least 6 turns or 5/16 inch (8mm).
STEP 3 Select installation method according to TV
Option 3 (For TV with A“Bump”)
Option 4 (Potential Cable Blockage)
Please make sure round holes of the brackets 4 are on top
side when assembly , then keep brackets 4 vertically centered and level
with each other.
5
Attach your TV to TV plate 3 , select the best height by yourself.
Insert Safety lock D1 and D2 in the bottom of brackets 4 and tighten
the screws D2 , Please lock your TV before using.
Notice: Please don’t over tighten the screw D2 , overtighten may
cause D1 broken.
USERS GUIDELINE
Stand Height Adjustment – Metal Pole/ TV Plate/Brackets
- Please take off the TV from the stand then select the proper height by yourself.
- Each level adjustment distance in metal pole / TV plate / bracket is 50 mm (2 inch).
- Attach the TV to the TV plate 3 again and tighten the safety screws D2 on the bottom of brackets to secure the TV to the stand.
View Angle Adjustment
TV plate 3 can swivel left and right 30 degrees in each side to provide
you a wide-range viewing angles when watch
Notice – Swivel function is manual not automatic. Base is not turntable,
the TV.
CUSTOMER SERVICE SUPPORTS
CONTINENTS
North America
Europe
Asia
CONTACT DETAILS
1 626 400 2997（CST 8AM – 5PM Mon.-Fri. )
MAILBOX
cs@rfiver.com
eucs@rfiver.com
jpcs@rfiver.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>